• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.648-651
• /
• 2008

Numerical calculations are performed to simulate the film cooling effect of turbine blade tip with squealer rim. Because of high temperature of inside rim, squealer rim is damaged easily. Therefore many various cooling systems were used. The calculations are based on 100,000 Reynolds number in linear cascade model. A blade has 2% tip clearance and 8.4% rim height. The axial chord length and turning angle is 237mm, 126$^{\circ}$. Numerical calculations are performed without and with film cooling. In a film cooling in the cavity, hot spots of cavity were cooled effectively. However hot spots of suction side rim still remains. The CFD results show that the circulation flow in cavity of squealer tip affects the temperature rise of squealer rim. To maintain the blade integrity and avoid the excessive hot spot of blade, rearrangement of cooling hole is needed.

• 한국유체기계학회 논문집
• /
• 제7권6호
• /
• pp.38-44
• /
• 2004

In this study, the overall performance and the effect of the tip leakage flow of the centrifugal compressor with a refrigerant HFC-l34a were numerically studied using CFX-TASCflow. To study the effect of the tip leakage flow, the numerical study of the overall performance of HFC-l34a centrifugal compressor with a cascade diffuser was preceded and compared with the experimental result. Six different tip clearances were used to consider the influence of the tip clearance on the performance. The tip leakage flow was illustrated for qualitative discussion. The results obtained in this study can be applied to the determination of the cold clearance.

• 한국유체기계학회 논문집
• /
• 제5권2호
• /
• pp.7-14
• /
• 2002

The effect of tip clearance is important part for turbomachinery performance. Tip leakage flow due to tip clearance is mixed with passage vortex. Large amount of loss is generated at the mixing region and overall performance of turbomachinery is reduced. Numerical calculation of the 1st stage rotor of GE7FA gas turbine is carried out to investigate tip clearance effect on performance, pitchwise variations of velocity profiles, pressure distributions and loss coefficients. A commercial code, CFX-TascFlow is validated in this study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.102-108
• /
• 2002

Numerical analysis has been conducted in order to simulate the flow characteristics by tip clearance of turbine cascades. A 3-D Navier-Stokes CFD code based on body-fitted coordinate system, pressure-correction and finite volume method has been used along with a commercial CFD code. The present results have showed that the development and generation of leakage vortex, vortex within tip clearance, etc. are clearly simulated, consistent with the generally known tendency. The leakage vortex occurs mainly by a separation of leakage flow that arises due to a pressure difference between two surfaces of the blade at the tip.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.324-329
• /
• 2004

In this study, an application of crack morphology variables in the Leak-Before-Break(LBB) evaluation for nuclear piping systems is investigated, including influences on the leakage crack size and crack instability loads. The crack surface roughness and the number of flow turns as a function of the crack opening displacement are applied to LBB evaluations for KSNP pressurizer surge line, for which fatigue and stress corrosion cracking are considered as failure mechanisms. As a result, there would be a significant impact on safety margins to acceptance criteria for the surge line if crack morphology variables are applied additionally to the current regulatory guide without re-analyses for justification of safety factors being applied on the leakage crack size and piping loads for evaluations.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.451-456
• /
• 2003

In this study, the overall performance and the effect of the tip leakage flow of the centrifugal compressor with the refrigerant HFC-l34a were numerically studied using CFX-TASCflow. To study the effect of a tip leakage flow, the numerical study of the overall performance of HFC-l34a centrifugal compressor with a cascade diffuser was preceded and compared with experimental result. Six different tip clearances were used to consider the influence of a tip clearance on performance. The tip leakage flow was illustrated for qualitative discussion. The results obtained in this study can be applied to the determination of the cold clearance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.925-926
• /
• 2007

전자계 및 열/유동 해석 프로그램을 활용한 수치해석적 방법으로 변압기 외함의 자계손실과 온도상승을 계산하는 경우, 많은 시간이 소요되기 때문에, 설계 또는 고객 요구시 신속한 대응이 어렵다. 따라서 3차원 간이 계산법을 정립하여 신속 정확한 해석적 방법으로 접근할 필요가 있었다, 본 연구에서는 권선의 누설자속에 의해 발생하는 변압기 외함의 자계손실을 계산하고 이에 따른 온도상승을 추정하고자 하였다. 또한, 실제 변압기의 온도상승 시험을 통해 온도상승 계산 결과의 정확성을 검증하고자 하였다.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.357-363
• /
• 2016

본 연구에서는 날개 두께 분포가 다른 두 임펠러를 이용하여 유체-구조 연성해석을 통해 운전익단간극을 예측하고 임펠러의 변형이 성능에 미치는 영향에 대해 연구하였다. 임펠러는 작동조건에서 작용하는 원심력, 압력, 열 하중의 영향으로 변형이 발생하게 된다. 이로 인해 초기 설계된 익단간극이 비균일하게 변화하는 것을 확인하였다. 특히 임펠러 날개의 선단과 후단에서 가장 큰 익단간극 감소가 발생하였으며, 이로인해 간극누설유동이 19.4% 감소하였다. 또한 운전조건에서 익단간극 감소로 간극누설 유량이 감소하면서 효율은 0.72% 증가하는 것을 확인하였다. 원심압축기 작동조건에서의 정확한 운전익단간극의 예측과 익단간극의 변화가 성능에 미치는 영향에 대해서 확인하였다.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.785-791
• /
• 2000

GDI (Gasoline Direct Injection) engines are considered as one of the candidates for next generation engines of passenger cars, which reduce exhaust emissions and fuel consumption. In GOI engines, a high-pressure gasoline supply system is required to directly inject the fuel to combustion chambers. Because of low lubricity of gasoline fuel, the clearance between a plunger and a barrel in GDI fuel pumps is too wide to achieve smooth hydrodynamic lubrication. Thus, it is difficult to generate high-pressure condition in GDI fuel pump since large amount of leakage flow occurs between the plunger and the barrel In this study, an optimum plunger design is presented to minimize leakage in the aspect of flow control. This paper analyzes leakage flow characteristics in the clearance to improve pumping performance of GDI fuel pumps. Effects of groove in the plunger are studied according to variations of depth and width. Evaluations of pumping performance are determined by the amount of pressure drop in the leakage path assuming a constant leakage flows. Both of turbulence and incompressible models are introduced in CFD (Computational Fluid Dynamics) analysis. Design parameters have been introduced to minimize leakage in limited space, and a methodological study on geometrical optimization has been conducted. As results of CFD analysis in various geometrical cases, optimum groove depths have been found to generate maximum sealing effects on gasoline fuel between the plunger and the barrel. This procedure offers a methodological way of an enhancement of plunger design for high-pressure GDI fuel pumps.

• 항공우주기술
• /
• 제9권2호
• /
• pp.185-192
• /
• 2010

75톤급 터보펌프를 대상으로 한 속도복합형 터빈과 설계회전수를 50% 증가시킨 30톤급 터보펌프 터빈 적용을 위한을 압력복합형 터빈 설계를 수행하였다. 속도복합형 터빈의 경우 1차원설계-유동해석-1차원설계의 반복적인 설계과정을 통해 원형노즐을 적용한 2열 초음속 충동터빈의 특성을 파악하였으며 최종적으로 기본형인 1열 충동형 터빈 대비 비출력 23.1% 향상, 무게 5% 감소된 ver. 14h 모델을 완성하였다. 압력복합형 터빈은 에너지 회수 비율, 2단 노즐 출구각, 2단 노즐 누설유량, 단별 출력 비율 등의 새로운 인자의 고려하여 각 변수의 성능에 미치는 영향을 검토하였으며 1차원 해석 기준 비출력이 36%가 증대되고 무게는 51% 감소한 터빈을 설계하였다. 압력복합형 터빈의 높은 성능을 위해서는 1단 및 2단 노즐의 형상설계가 매우 중요할 것으로 판단되며 유동해석을 통해 최적화할 예정이다.