• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.179-181
• /
• 2001

색채에 대한 인간 감성 반응도를 비교 선정을 통해 규명하였다. 원, 정사각형 및 정삼각형을 기본도형으로 하고 여섯 가지 비례를 바탕으로 색채를 대입한 감성 반응 시각제시물을 제작하여 색체에 대한 인간 감성을 측정 평가하였다. 색채는 먼셀 기본 5 색인 적(R), 황(Y), 녹(G), 청(B), 자(P)와 무채색의 검정색을 사용하였다. 피검자군은 대학생남녀 각 50명 합계 100명이다. 실험을 위해 별도의 시각제시물을 제작하였으며, 시각잡음이 제거된 별도의 실험공간이 제공되었다. 시각물과 피검자의 거리는 피검자 스스로 가장 편한 거리로 맞추도록 조정케 하였다. 도형 및 비례 별로 제작된 9개의 제시물 각각에 대한 피검자의 선호 및 혐오를 5점 척도로 측정하였다. 이 측정에서 감성정도와 함께 자신이 선호하고 혐오하는 대상을 선정케 된다. 실험 결과를 통해 감성 반응도, 선호 및 혐오 색채와 그 정도를 추출하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1800-1803
• /
• 2002

The pulsed power system was widely making use good of many industrial and environments. The pulse generator generally required for short pulse duration and high peak value was forced to consider its volume and economy. In this paper, this system is designed and fabricated which has a compact size of pulse generator with switched MOSFET. We have studied the removal of rust material using Arc discharging in pulsed power system. It have tested their characteristics by adjusting variable voltage charging and pulse repetition rate. As a result, We can eliminate rust materials with this device.

• Korean Journal of Microbiology
• /
• v.27 no.2
• /
• pp.117-123
• /
• 1989

Radioactive N-$\alpha$-p-nitrobenzoxycarbonyl (NBZ)-L-[2,$3-^{3}$H] arginyl diazomethane was used as an affinity label for the vacuolar arginine transporter in Neurospora crassa. Vacuolar matrix proteins were removed by fracturing the membranes with freeze-thaw method in dry ice/ethanol bath. Vacuolar membrane proteins were then wasged with 500mM NaCl to remove ionically bound derivatives and peripheral membrane proteins from vacuolar membranes. After dissolved in 1% Titon X-100, dissolved vacuolar memvrane proteins were separated with molecular sieve column chromatography, anion and cation exchange chromatographies. The arginine transporter was purified giving the purification factor of 1136.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.82-82
• /
• 2014

마감 도장이 완료된 면이 장기간 노출된 상태에서 후속 작업으로 인해 금속 분진 등의 오염물이 쌓이면 수분 및 염분 등과의 반응으로 도장 표면에 녹 등의 2차 오염이 발생하여 광택이나 표면 미려함 등을 잃어버리게 된다. 이럴 경우 소요되는 시간과 경비를 줄이기 위해 재도장 작업 대신 도장 표면의 오염 막을 제거하기 위한 방법으로 rust remover가 사용되고 있으나, 현재 rust remover 사용에 따른 도막 열화에 관한 객관적인 자료가 없는 실정이다. 본 연구에서는 당에서 사용되고 있는 선박용 마감 도료를 대상으로 rust remover가 도막 표면 열화에 미치는 영향에 대하여 조사 검토하다.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.297-303
• /
• 1974

An investigation has been performed to find an effective separation method of steriols and tocopherols from the deodorized condensates of vegetable oils. Simple heating of the starting mixture isolated the oil layer from water, and the former was collected. It was then methyl esterified followed by a distillation for the removal of fatty acid. The ensuing step was to saponify the residue. The unsaponifiable matter was extracted by both methanol and concentrated. The sterol was crystallized by cooling such concentrated solution. To obtain tocopherol, the mother liquor was first dissolved in methanol. Cooling this solution to $-20^{\circ}C$ trapped fatty acid which was filtered out. The filtrate was then treated with ion exchange resin.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.301-312
• /
• 2011

Epoxy resin has superior durability and adhesive strength and proper physical strength so that it is used to diversity materials for multi-purposes. However epoxy resin is hardly removed after hardening specially once it is applied to artefacts, it is difficult to remove them under re-conservation. This paper is an experimental study on removing epoxy resin applied to iron objects using Nd:YAG laser cleaning system. Tests conducted in this study investigated how increasing laser energy and pulses would give effect on samples. The samples were prepared in a way that epoxy resin, itself pure and one which was mixed with pigment and they were applied to iron coupons and corroded iron coupons respectively. As a result of experiment, pure epoxy resin applied to corroded iron coupons was ablated at high laser energy but epoxy resin applied to iron coupons and mixing with pigment were not ablated but discolored and bubbled due to laser-induced heat generation. Results of FT-IR showed no component alteration of shifted resins and no residues on the surfaces ablated by laser irradiation. From SEM-EDS for removed surfaces, the debris from epoxy resin and melting iron was observed. Therefore, this study demonstrated the possibilities and limitations for laser cleaning to remove epoxy resin from iron objects.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.423-432
• /
• 1986

Atomic absorption spectrophotometric (AAS) determination of hexavalent chromium [Cr(VI)] in a waste water was studied. Cr(VI) was extracted with p-xylene from the wastewater, in the way of ion pair formation with anion exchanger aliquat-336(tri-caprylmethyl ammonium chloride). 100ml waste water, after organic materials were extracted out with toluene, was acidified with conc. HCl adjusting the medium to pH 0.5 and 20ml of p-xylene containing 0.01M aliguat-336 was used to extract Cr(VI) from the acidified solution. The absorbance of chromium was measured with air-acetylene flame at 357.9nm. Standard addition method was used in the determining concentration of Cr(VI) extracted. No interference has been found in the extraction of Cr(VI) by the Al(III), Fe(III) and Cr(III) ion presented. However, Fe(II) decreased the absorbance of Cr(VI), due to the fact Fe(II) reduces Cr(VI) to Cr(III). The contained organic material was removed prior to extracting process, since it may reduced the absorbance of Cr(VI). The recovery of added Cr(VI) was over 96%, which seems to be promising and the relative standard deviation was 3.95%

• KSBB Journal
• /
• v.16 no.5
• /
• pp.523-525
• /
• 2001

Curdlan is one biopolymer composed of ${\beta}$1,3-glucan and dissolved in a alkali solution but formed salt under neutral or acid condition. It was produced by Agrobactrium species and the separation process is necessary to make pure curdlan from the culture broth. The pH swing separation method was as feasible separation process using solubility changes with the pH difference. however, this method requires a lot of acid and alkali solution also produces a lot of waste. Therefore, an efficient process which could save energy and minimize toxic waste was developed. A density gradient separation process was developed in this research. High density sucrose solution was used as a separation agent. Curdlan was separated from the culture broth when the density of the sucrose solution was 1.15 g/L. Since the curdlan was produced on the surface of cell wall. the pre-treatment of culture broth was necessary. Curdlan recovery yield was increased up to 83% with the homogenization of the culture broth and further increased up to 87% with the treatment of alkai-acid solution.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.508-514
• /
• 2017

Water-bloom and red tide due to eutrophication have been overgrown and have caused various environmental problems. Recently, however, research on bid-diesel that can utilize algae as an energy source has been actively carried out. In particular, many studies variously have been conducted to utilize algal photosynthesis oxygen as a supply method for reducing the energy by an air blower in MWTP. In this study, a lab scale algae-nitrification reactor was operated to replace the oxygen required for nitrogen removal and the operation period was largely divided into three sections. In the first section, ammonia nitrogen removal efficiency was 24 ~ 38% according to the MLSS (Mixed Liquer Suspended Solid) concentration. In the second section, ammonia nitrogen removal efficiency was 38 ~ 50% according to the micro-algae concentration and in the last section ammonia nitrogen removal efficiency was 61 ~ 80% according to HRT (Hydraulic Retention Time). As a result, as the MLSS decreased and algae biomass increased, the ammonia nitrogen removal efficiency tended to increase, but the effect of Algae biomass was greater than that of MLSS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.272-272
• /
• 2011

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 차세대 전자 소자에 쉽게 적용이 가능하고 응용 잠재적 능력이 뛰어나기 때문에 차세대 비휘발성 메모리 소자에 응용하려는 연구가 세계적으로 활발히 진행되고 있다. 본 연구에서는 poly (methylmethacrylate) (PMMA) 절연성 고분자 박막 안에 CdTe와 CdTe-CdSe 코어-쉘 나노입자를 각각 분산시켜 이를 전하의 저장 매체로 사용하는 메모리 소자를 제작하였다. 제작된 각각의 소자에 대한 메모리 메카니즘과 PMMA 박막 안에 분포되어 있는 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 전기적 영향에 대하여 연구하였다. 소자에 필요한 용액을 제작하기 위해 서로 다른 용매에 녹아 있는 CdTe-CdSe 나노입자와 PMMA를 혼합하였다. Al 금속을 하부 전극으로 증착한 p-Si (100) 기판 위에 나노입자와 PMMA가 혼합된 용액을 스핀 코팅 방법을 사용하여 박막을 형성한 후, 남아있는 용매를 제거하기 위해 열처리를 하였다. 용매가 모두 제거된 박막위에 금속 마스크를 사용하여 상부 Al 전극을 열증착 방법으로 형성하였다. 나노입자가 포함된 고분자 박막의 메모리 특성을 비교하기 위하여 나노입자가 없는 PMMA층만으로 형성된 소자도 같은 방법으로 제작하였다. 세 가지 종류의 소자에 고주파 정전용량-전압 (C-V) 측정을 한 결과 나노입자가 분산된 PMMA 층으로 제작된 소자에서만 평탄 전압 이동이 관찰되었으며, 이것은 나노입자를 전하 포획 장소로 사용할 수 있다는 것을 확인하였다. 정전용량-시간 (C-t) 측정을 하여 나노입자가 포함된 PMMA 층으로 제작된 메모리 소자의 안정성을 관찰하였다. C-V와 C-t 측정 자료를 바탕으로 제작된 메모리 소자의 메모리 메카니즘과 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 역할을 설명하였다.