• Composites Research
• /
• v.13 no.3
• /
• pp.58-66
• /
• 2000

CARALL(Carbon fiber reinforced aluminum laminates) was fabricated with CFRP prepreg and A17075, using a autoclave. The mechanical properties of three samples i.e. A17075, CFRP and CARALL were also investigated as a function of size in circular holes. Theoretical approach into analysing mechanical behaviors near the circular hole notch was carried out to compare with experimental data, furthermore. By the adhesive bonding of A17075 to CFRP, abrupt strength reduction was prevented. From the consideration of modified point stress failure criterion, predicted results was well consistent with the experimental one.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.73-82
• /
• 1998

This paper is especially concerned with the weldment between support beam and square bar that plays important roles in control box of Expansion Joint as a brdige structure. Fatigue strength ({TEX}$$\sigma$_{ult}${/TEX}) of the weldment is dependent on notch factor ({TEX}$K_{f}${/TEX}) become important factors to predict fatigue life. The fatigue notch sensitivity (η) for metals can be divided into two types ; high and low notch sensitivity. In this work, the Expansion Joint weldment was found to have low notch sensitivity. The maximum strain distribution during static loading is similar to the FEM analysis. Fatigue test of real structure was performed up to {TEX}$10^{6}${/TEX} cycles to be compared with predicted endurance limit.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.59-64
• /
• 2012

The impact strength of material is considered the most important design factor for small and light products. Impact strength is a unique material property, thus the impact strength should not depend upon the geometry of specimen. However it varies according to specimen thickness, notching method, and notch shape. In this study, the variations of impact strength have been investigated according to thickness, notch shape, and notching method of specimen. Engineering plastics such as PC, ABS and POM have been used in this study. Experimental results showed impact strength increased as thickness decreasesd. PC showed the highest increment of impact strength when the thickness was thin. Fractured section of PC showed brittle fracture behavior when the specimen was thick. However it showed ductile fracture behavior when it was thin. The impact strength of in-mold notched specimen showed higher than that of milling notched specimen. PC showed the highest notch sensitivity among the materials used in this experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.20-20
• /
• 2021

하천에서 유해화학물질 유출사고로 인하여 오염물질이 유입되었을 경우, 이에 대응하기 위하여 오염운의 도달시간과 농도를 예측하는 것은 매우 중요하다. 종방향의 혼합거동이 중요한 넓은 범위의 하천을 대상으로 오염물질의 이송을 예측하기 위하여 일반적으로 1차원 Fickian 모형을 사용한다. 그러나 실제 하천에서 오염물질의 농도를 측정하였을 경우, 대부분의 농도분포는 오염물질의 저장대효과로 인하여 긴 tail 부분을 갖는 왜곡된 분포를 갖게 된다. 이러한 저장대 효과는 여러 하천내의 다양한 불규칙성으로부터 발생하나, 국내 하천에 많은 보가 설치되어 있음에도 불구하고 하천 내부에 설치된 수리구조물에 의하여 발생하는 인공적인 저장대 효과에 관한 연구가 미흡한 실정이다. 따라서 본 연구에서는 실내 수리실험과 수치 모의를 통하여 노치가 존재하는 보주변에서의 흐름 특성과 오염 물질의 이송 특성을 규명하고, 이를 통해 보의 지형 및 수리적 인자가 저장대 메커니즘에 미치는 영향을 분석하였다. 수리 실험을 통한 넓은 범위에서의 수평방향 흐름장과 농도장을 측정하기 위하여 본 연구에서는 광역 계측방법인 Large Scale Particle-Image-Velocimetry (LSPIV) 기법과 Planar-Concentration-Analysis (PCA) 기법을 각각 유속과 농도 측정을 위해 적용하였다. 더 많은 보의 지형 및 수리적 조건에 따른 저장대 메커니즘을 분석하기 위하여 3차원 Reynolds-averaged Navier-Stokes (RANS) 모형을 통해 모의조건을 확장 적용하였다. 측정 및 모의 결과를 바탕으로 노치가 존재하는 보의 지형 및 수리적 인자가 저장대 메커니즘에 미치는 영향을 분석하였다. 저장대 영역 면적의 크기는 노치사이의 간격이 증가할수록 증가하였으며 노치의 높이의 경우에는 크게 민감하지 않은 경향을 나타냈다. 추적물질의 체류 시간은 노치사이의 간격과 보의 높이가 증가할수록, 유량이 감소할수록 증가하여 질량교환계수 값이 감소하는 경향을 나타냈다. 프루드 수와 레이놀드 수 모두 질량교환계수와 양의 상관 관계를 나타냈으나 저장대 영역의 면적의 크기와는 낮은 관계성을 나타냈다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2475-2482
• /
• 1993

The effects of the hole size(2R) and the specimen width(W) on the fatigue strength and the fatigue life in plain woven glass/epoxy composite plates are experimentally investigated under constant amplitude tensile fatigue loading. It is shown in this study that the notch sensitivity under fatigue loading is lower than that under static loading. It can be explained by the fact that the stress concentration is relaxed by the damage developed at the boundary of circular hole. To predict the fatigue strength at a specific cycle, the modified point stress criterion represented as a function of the geometry of the specimen(2R and W) is applied. It is found that the model used in the prediction of the notched tensile strength predicts the fatigue strength with reasonable accuracy. A model for predicting the fatigue life in the notched specimen, based on the S-$N_f$, curve in the smooth specimen, is suggested.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.115-121
• /
• 2011

The size of hydrogen molecule is not so small as to invade into the lattice of material, and therefore, hydrogen invades into the material as atom. Hydrogen movement is done by diffusion or dislocation movement in the near crack tip or plastic deformation. Hydrogen appeared to have many effects on the mechanical properties of the Cr-Mo steel alloys. The materials for this study are 1.25Cr-0.5Mo and 2.25Cr-1Mo steels used at high temperature and pressure. The hydrogen amount obtained by theoretical calculation was almost same with the result solved by finite element analysis. The distribution of hydrogen concentration and average concentration was calculated for a flat specimen. Also, finite element analysis was employed to simulate the redistribution of hydrogen due to stress gradient. The calculation of hydrogen concentration diffused into the material by finite element method will provide the basis for the prediction of delayed fracture of notched specimen. The distribution of hydrogen concentration invaded into the smooth and notched specimen was obtained by finite element analysis. The hydrogen amount is much in smooth specimen and tends to concentrate in the vicinity of surface. Hydrogen embrittlement susceptibility of notched specimen after hydrogen charging is more remarkable than that of smooth specimen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1107-1113
• /
• 2002

This study presents the hydrogen emblittlement in the metal, which decreases the ductility and then induces the brittle fracture. The contribution deals with the effect of strain rate and notch geometry on hydrogen emblittlement of 1.25Cr-0.5Mo and 2.25Cr-1Mo steels, which are in use at high pressure vessel. Smooth and notched specimens were examined to obtain the elongation and tensile strength. For charging the hydrogen in the metal, the cathodic electrolytic method was used. In this process, current density is maintained constant. The amount of hydrogen penetrated in the specimen was detected by the hydrogen determenator(LECO RH404) with the various charging time. The distribution of hydrogen concentration penetrated in the specimen was obtained by finite element analysis. The amount of hydrogen is high in smooth specimen and tends to concentrate in the vicinity of surface. The elongation and tensile strength decreased with the passage of charging time in 1.25Cr-0.5Mo and 2.25Cr-1Mo steels. The elongation increased and tensile strength decreased as strain rate increased. As a result of this study, it is supposed that 1.25Cr-0.5Mo steel is more sensitive than 2.25Cr-lMo steel in hydrogen embrittlement. Hydrogen embrittlement susceptibility of notched specimen after hydrogen charging is more remarkable than that of smooth specimen.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2021

This paper presents sensitivity analysis results of strain on notches under cycling loading to 2-D finite element density considering plasticity. Cylindrical notched specimens having some stress concentrations were modeled with 2-D axisymmetrical finite element having various finite element densities. Elasto-plastic finite element analysis was performed for the various finite element models subjected to cycling loading considering plasticity. The finite element analysis results were compared to investigate sensitivity of the finite element analysis variables such as von-Mises effective stress, accumulated equivalent plastic strain, and equivalent plastic strain to 2-D finite element density. As a result of the comparison, it was found that the accumulated equivalent plastic strain is more sensitive than the others whereas the von-Mises effective stress is much less sensitive.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1675-1678
• /
• 2008

어류는 민감하기 때문에 최적화된 어도를 설계하는 것은 매우 어려운 일이다. 이와 같은 문제를 해결하기 위해서, 관찰, 수리모형시험과 같은 방법을 이용한 연구가 주를 이루어 왔다. 최근 들어 어도에 대한 기본 지식의 축적과 CFD 프로그램이 발전함에 따라 수치모의를 이용해 최적 어도를 설계하고자 하는 노력이 활발해 지고 있다. 본 연구에서는 최적 어도 설계를 도모하기 위해서 어류의 휴식을 위해 설치되는 풀(pool) 내의 흐름해석을 수행하였다. 군남홍수조절지를 대상으로 설계도면을 분석하여 3차원으로 변환하여 구조물형상을 구축하였으며, FLOW-3D 모형을 이용하여 흐름을 해석하였다. 휴식 풀 내의 흐름을 모의한 결과 어도 내 월류 수심이 10cm 일 경우, 휴식 풀 내 유속은 풀 내 유입어도의 노치와 잠공부분에서 최대 유속이 0.4m/s로 나타났고, 국부적으로 집중된 유속에 의해 풀 내 순환류가 발생하나, 유속의 범위가 최대 0.15m/s를 넘지 않는 것으로 모의되었다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.371-378
• /
• 2001

Recently, the parameters, models, and experimentations, which evaluate the fracture properties of concrete, have been proposed by many researchers, and their developments allow us to analyze the non-linear and quasi-brittle fracture mechanisms. In this paper, a brief treatment of the fracture parameters was presented and the experiments of 3-point bending tests were conducted to compare J-integral($J_{Ic}$ /) with other parameters($K_{Ic}$ , $G_{v}$ , and $G_{F}$ ). The change of parameter values according to the width and notch length of concrete beam specimens was also considered. The load-displacement curves are used to experimentally measure concrete fracture toughness. From the results of experiment, it is noted that the value of $GF$ and tic decreases as the notch depth increases and $G_{F}$ is less sensitive than $J_{Ic}$ . Therefore, the former is more appropriate to use as the concrete fracture toughness parameter. The values of $v_{v}$ and $J_{Ic}$ increase when the width of concrete specimens increase from 75 mm to 150 mm. Therefore, the effects of specimen width need to be considered in determining the concrete fracture toughness.