• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.04a
• /
• pp.120-125
• /
• 1992

The fatigue tests were performed on the high strength concrete beams with single edged notch which was reinforced steel fiber. The steel fibers were used 1.0 percent by volume fraction. These were tested consists of constant amplitude tests for different levels of loading. The test program included endurance limit with repect to flexural fatigue and relation of load-CMOD(crack mouth opening displacement). The results of test, it is found from S-N curve that the fatigue strength for a life of 2 million cycles of load was approximately 70percent with respect to the static ultimate strength .

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.180-184
• /
• 2010

In this paper, the filter design and simulation are performed to construct the multi-channel cardiac activation main amplifier. The main amplifier consists of sample and holder, variable high pass filter, notch filter, variable low pass filter. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution and the filter is designed for 128 channels cardiac activation main amplifier.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.147-154
• /
• 2004

This paper presents a procedure for analysis and design of a fine positioning stage, which has many applications in industries for machine tools, semiconductor, LCD and so forth. The stage considered here is based on a single module with 3 axes which is composed of flexures hinges, piezoelectric actuators and their peripherals. Through a series of analysis, the structural analysis model is simplified as a rigid body(the moving part) and springs(the flexures hinges). An experimental design procedure is applied to determine the dimension of flexures hinges. A sensitivity analysis on the notch positions is also performed to obtain a guideline of fabrication accuracy for the stage. An actual fine stage is made and verified through an experiment on the dynamic characteristics.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.928-929
• /
• 2011

본 논문에서는 IPMSM(Interior Permanent Magnet Synchronous Motor)의 회전자에 보조 슬롯인 노치(Notch)와 자속 장벽인 베리어(Barrier)를 설치하여 전반적인 구동 특성을 향상 시켰으며, 각 형상에 따른 d, q축 인덕턴스의 변화를 고찰하였다. 인덕턴스의 계산은 IPMSM의 등가회로 및 벡터도를 이용하였으며 계산되어진 인덕턴스로 전류위상각에 따른 토크를 계산하고 FEM(Finite Element Method)결과와 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2247-2248
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이런한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.615-616
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 싶어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이러한 전동차 신호전달시스템 분석을 년 연구에서 하고자 한다.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.28-32
• /
• 2004

Fatigue life at seam weldment of thick plate was estimated using the finite element and FEM-FAT(an exclusive fatigue solver). Finite element meshing at toe and root of weldment was based oil Radaj's theory. Also, the results of FE analysis were compared with experimental results in the point of Miner's Rule. The results of FE and FEM-FAT analysis were in accord with experimental results within 60% confidence. This result reveals that above techniques is useful in assessment of seam weldment and to be an alternative method instead of an object experiment.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1281-1282
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이런한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1741-1742
• /
• 2006

전동차 운행시스템은 속도를 지령하는 NOTCH의 상태를 전압으로 인식하여 주파수로 변환한 후 주파수 변환신호를 출력하는 아날로그 및 디지털 인코더와 인코더의 주파수 변환신호를 입력받아 카운트하여 노치의 상태를 데이터버스(DATA BUS)에 실어 중앙처리장치(CPU)에 데이터를 출력하는 특징을 갖는다. 이러한 전동차 신호전달시스템 분석을 본 연구에서 하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.107-112
• /
• 1982

In order to analyze and investigate in the fatigue behavior of the notched specimens under the two level stressing, the U-notched specimens of structural carbon steel which is generally used is prepared. The obtained results are summarized as follows; (1) The fatigue limit of the U-notched specimens is lower than that of the unnotched. The fatifue notch factor (.betha.) of the U-notched specimens is 1.44 for mild steel and 1.52 for harden steel. The notch sensitivity (q) is 0.68 for mild steel and o.8 for harden steel. That is, these facts show that harden steel is more sensitive to the notch than mild steel. (2) The fatigue life time of the U-notched specimens under the overstressing is shorter than under the constant stressing, and the degree of fatigue life time decrease is different to each stress level; the degree for the high stress level is more than for the low stress level. (3) The fatigue life time of the U-notched specimes under the understressing is longer than under the constant stressing, and the degree of fatigue life time increase for the low stress level is more than for the high stress level.