Proceedings of the Korea Water Resources Association Conference
/
2023.05a
/
pp.298-298
/
2023
전자파표면유속계는 홍수량 측정을 위해 사용되는 비접촉식 유속계로, 전자파를 발사한 후 수표면에 반사되는 전자파의 도플러 효과를 이용하여 표면유속을 측정하는 기기이다. 국제적으로 1980년대부터 홍수량 측정의 어려움을 극복하기 위해 하천 유량측정 업무에 활용하였다. 전자파표면유속계를 이용하여 정확한 표면유속을 측정하기 위해서는 측정 위치, 방향, 노출시간, 환경 등을 고려해야 한다. 여기서 노출시간은 표면유속 측정을 위해 전자파를 흐름 상태의 수표면에 노출시키는 시간을 의미한다. 특히, 노출시간은 유속에 따라 결정되며, 빠른 유속일수록 측정에 필요한 노출시간이 짧아진다. 그러나 노출시간이 너무 짧으면 측정 유속값이 부정확하거나 불안정해질 수 있으며, 반대로 너무 길면 수위 등 측정조건이 변화하여 측정값이 부정확해질 수 있다. 따라서 홍수량 측정을 위해 전자파표면유속계의 표면유속 측정의 적정한 노출시간을 설정해야 한다. 본 연구에서는 전자파표면유속계의 적정한 노출시간 검토를 위해 안동하천실험센터에서, 표면유속 최대 4.92 m/s에서 최소 0.457 m/s 범위의 19개 유속 조건에서 노출시간을 10초에서 40초까지 5초 간격으로 변화시키며 표면유속을 측정하였다. 현재 국내외 가이드라인에서 권고하고 있는 노출시간 30초에서 측정된 표면유속과 각 노출시간에서 측정된 표면유속의 정확도 검증을 통해 유사한 값을 가지는 표면유속을 검토하여, 수위변화에 대응하여 홍수량 측정을 위한 최소 노출시간을 검토하였다.
들깨 '수원25호', 담배 'L8', 'KF109'와 'NC82', 시금치 '입추'와 나팔꽃을 생장혼경조절이 가능한 대기오염원 노출상에서 SO? 140ppb/시간 또는 O? 150ppb/시간의 농도로 하루 24시간 10일 동안 노출시킨 결과 '수원25호' 들깨와 담배 'L8'은 SO?에 민감한 반면, 담배 'L8'과 나팔꽃은 오존에 아주 민감한 것으로 판명되었다. 위의 농도에서 가시적 피해가 조사식물의 50%에서 발생하는 병반발생빈도 50%(SF?)를 기준으로 설정한 한계노출시간 조사에서 오존에 대한 한계 노출시간은 담배 'L8'의 경우 24시간, 나팔꽃의 경우 72시간, 담배 'NC82'와 'KF109'의 경우 144시간 내외, 시금치의 경우 216시간으로 추정되었으며, SO?에 대한 한계노출시간은 담배 'L8'의 240시간을 제외하고는 모든 식물에서 240시간 이상으로 추정되었다.
2-부톡시에탄올(2-butoxyethanol)에 대한 생물학적 노출지수 설정에 필요한 자료는 상당수 존재한다. 다양한 실험실 및 직업적 현장연구는 2-butoxyethanol에 노출된 후 소변에서 butoxyacetic acid의 배설을 조사하여 생물학적 노출지수를 구축할 데이터베이스를 제공하였다. 실험실 연구는 작업시간 동안보다는 짧은 시간을 노출시킨다. 휴식 중에 실시한 실험 자료들을 20ppm에 8시간 노출로 외삽하면 작업시작 종료 시점의 소변 중 butoxyacetic acid의 농도가 각각 192, 272, 190 mg/g creatinine이었다. 작업부하 30 watts와 50 watts의 연구 결과를 외삽하면 각각 304 butoxyacetic acid/g creatinine과 313 butoxyacetic acid/g creatinine이었다. 작업현장 연구는 소변을 가수분해시킨 후 총 butoxyacetic acid의 검출 범위가 광범위할 것으로 예상된다. 이러한 외삽의 결과는 일반적으로 1ppm 미만의 노출에서 나온 것이라는 점에 유의해야 한다. 피부 흡수의 가능성과 2-butoxyethanol의 상대적으로 낮은 휘발성을 감안할 때 현장 연구에서는 피부 경로가 흡입 연구보다 더 중요할 수 있다. 따라서 현장 조사는 휴식을 취한 자원봉사자를 대상으로 실시한 흡입 연구와 비교하면 소변 중 butoxyacetic acid 농도를 과대평가하는 경향이 있다. 활용 가능한 시뮬레이션 연구에서 휴식 시 2-butoxyethanol의 TLV-TWA 20ppm에 8시간 전신(흡입과 피부) 노출되는 경우 가수분해된 총 butoxyacetic acid가 210 mg/g creatinine이 예상되고 작업부하 50 watts에서는 373 mg/g creatinine이 예측된다. 50 watts의 작업량으로 20ppm에서 8시간 노출되는 경우 생물학적 노출지수(BEI)는 약 400 mg/g creatinine일 것이다. 그러나 생물학적 노출지수는 외삽에 대한 불확실성, 심각한 피부 노출 및 작업장 노출평가 자료의 부족을 반영하여 200 mg butoxyacetic acid/g creatinine으로 설정하였다. 인용한 자료들의 한계에도 불구하고 자원 봉사자 연구와 시뮬레이션 연구의 자료들이 일치성이 있었다. 연구에 따르면 butoxyacetic acid는 측정 가능한 양으로 존재하며 작업 교대 중에 검출될 수 있는 충분한 시간의 반감기를 가지고 있다. Sakai 등의 연구 자료와 일부 모델링 자료에서 노출농도가 높은 경우 주중에 약간의 축적 가능성을 보고하였지만 작업장에서 일반적으로 노출되는 농도 범위에서는 누적이 예상되지 않으며 작업 종료 후에 소변시료를 채취하는 것이 바람직하다. 대다수의 연구에서 소변 중 butoxyacetic acid 농도 수준의 개인 간 다양성을 보고하였다. 또한 대부분의 작업현장 연구에서는 2-butoxyethanol의 주변 환경 농도수준과 소변 중 butoxyacetic acid 수준에 유의한 상관관계를 발견하지 못하였다. 상호 연관성이 결여된 원인은 대부분 피부 노출의 영향으로 추정하였다. 개인 보호 장갑을 착용한 근로자들에게서는 유의한 상관관계가 발견되었다.
The effect of exposure times on the aging characteristics of carbon fiber/epoxy composite ring specimen was evaluated using an accelerating aging tester. Combined exposure conditions, such as temperature, moisture, and ultraviolet, were applied up to 3000 hours. Tensile properties and flexural properties including the effect of curvature were evaluated on the specimens subject to various exposure times through a material testing system. Their aging surfaces were observed through a scanning electron microscope. According to the results, tensile modulus was little affected by the exposure times. However, tensile strength, at the early stage of the exposure times, increased due to physical aging and curing reaction, but tensile strength slightly decreased due to degradation as the exposure times increased. The flexural modulus and flexural strength increased at the early stage of the exposure times, but slightly decreased as the exposure times increased. Aging surfaces of the specimens examined using the scanning electron microscope revealed a different morphology in various exposure times and provided useful information for identifying the degradation in mechanical properties of the composite subject to various exposure times.
현대 생활에서 대부분의 사람들은 90%이상을 실내(가정, 일반사무실, 실내작업장, 공공건물, 지하시설물, 상가, 음식점, 자동차, 지하철 등)에서 생활하기 때문에 실내공기질(indoor air quality)은 개인이 오염물질에 노출되는 주요한 요인이다. 이산화질소($NO_2$)는 고온의 연소과정에서 발생되는 부산물로써 차량, 발전소와 산업장 등에서 발생되고 있다. 실내에서 이산화질소의 농도는 가스레인지, 케로센(kerosene) 난방기, 흡연에 주로 영향을 받는다. $NO_2$는 호흡기 증상과 관련된 각종 질환을 유발시키는 것으로 보고되고 있다. 본 연구는 한국의 서울에서 직장인 95명의 시간활동도가 조사되었으며, 호주 브리스베인에서 직장인 57명의 시간활동도와 동시에 각 가정의 실내.외 및 직장의 $NO_2$ 농도를 측정하였다. 또한 개인 $NO_2$ 노출을 예상하여 각 도시의 빈도분포를 예상하였다. 본 연구의 결과를 보면 다음과 같다. 1. 서울의 95명의 직장인들은 실내에서 약 83.8%의 시간을 보냈으며, 브리스베인의 57명의 직장인들은 실내에서 약 88.3%의 시간을 보냈다. 2. 브리스베인에서 측정된 실내의 NO2 평균농도는 10.5ppb(${\pm}5.6$), 실외의 NO2 평균농도는 14.5ppb(${\pm}5.8$), 직장에서의 $NO_2$ 평균농도는 18.2ppb(${\pm}5.0$)였다. 개인의 $NO_2$ 노출은 평균 15.0ppb(${\pm}5.2$)였다. 개인의 $NO_2$ 노출은 실외의 $NO_2$ 농도(r=0.42)보다 실내의 $NO_2$ 농도(r=0.42)보다 실내의 NO2 농도(r=0.49)에 상관성이 더 높았다. 3. 시간 가중치 모델을 이용한 개인 $NO_2$ 노출은 측정된 개인 NO2 노출과 통계학적으로 상관성을 가지고 있었다(r=0.58). 예측된 개인 $NO_2$ 노출은 측정된 $NO_2$ 노출보다 낮게 나타났으며, 이것은 출퇴근 등에 의한 교통의 이동에 따른 노출 때문인 것으로 생각되었다. 4. $NO_2$ 농도 분포를 log-normal 분포, 시간활동도를 Normal 분포로 가정하고 Monte-Carlo 시뮬레이션을 했을 때 서울의 직장인의 개인 노출은 평균 36.7ppb(${\pm}10.9$)였으며, 브리스베인의 직장인의 개인 노출은 평균 13.7ppb(${\pm}4.1$)였다.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.596-596
/
2012
모듈 상태에서의 태양전지 효율에 영향을 주는 외부 요인으로는 풍력과 눈 등의 하중으로 인한 물리적 스트레스와 자외선을 포함하는 광범위한 파장 대역의 빛의 영향 등이 있다. 따라서 본 연구에서는 태양전지의 야외 노출 시간에 따른 소자의 특성 및 효율 변화를 분석하고자 효율이 17.14%인 결정질 태양전지를 18시간 야외에서 노출 시켜 6시간 간격으로 전기적 특성을 분석해 태양전지의 여러 파라미터 변화를 분석하고자 한다. 본 실험에서는 태양전지의 외부 노출에 의한 소자 특성 및 파미미터 변화를 확인하고자 일정 시간 간격으로 노출 된 solar cell에 대한 Dark I-V, Light I-V 측정을 하였다. DIV 측정을 통해 노출 시간이 증가할수록 동일전압 대비 current가 증가하는 것을 알 수 있었다. 또한 역방향 전압에서는 누설전류가 증가함을 확인하였다. Turn-on 전압 감소와 누설전류 증가, 직렬저항의 변화로 인한 소자의 파라미터 변화를 확인하기 위한 LIV 측정에서는 노출 시간 증가에 따라 단락전류 $0.177(mA/cm^2)$, 개방전압 2.699 (mV), 곡선인자 0.5%가 감소하였으며, 소자의 효율도 0.27% 감소하였다. 이처럼 태양전지의 외부 노출은 소자의 파라미터를 감소시키고 최종적으로 소자의 효율을 저해하는 원인이 됨을 확인하였다.
The moisture absorption behavior, tensile properties, and thermal analysis properties of MWCNT embedded nanocomposites exposed to temperature and moisture were evaluated. The contents of MWCNT were 0 wt%, 1 wt%, and 2 wt%, respectively. The specimens were exposed to immersed conditions at $25^{\circ}C$ and $75^{\circ}C$ for up to 600 hours. According to the results, the apparent moisture content increased as the exposure time increased, but the difference between the maximum moisture content and the moisture content at 600 hours was almost constant. The tensile modulus decreased with increasing exposure time and the degree of decrease was increased significantly as the MWCNT content and exposure temperature increased. The tensile strength decreased with longer exposure time without MWCNT, but increased with MWCNT due to the reinforcing effect of MWCNT. The storage modulus, glass transition temperature, tan d peak magnitude were low as the exposure time increased, but tan d curves with two peaks appeared when exposed to high exposure temperature for more than 300 hours.
Kim, Yun-Sin;Hyeon, Yeon-Ju;Choe, Seong-Ho;Jo, Yong-Seong;Hong, Seung-Cheol
Proceedings of the Korean Environmental Health Society Conference
/
2005.11a
/
pp.118-120
/
2005
본 연구는 송전선 주변 거주 초등학교 학생들을 대상으로 시간 활동 행태에 따른 여러 미세환경, 즉 주거환경, 학교환경, 학원, PC방, 교통에서의 자기장 노출수준을 다양한 매트릭스를 이용하여 비교 ${\cdot}$ 분석함으로써 연구대상자들의 활동한 미세환경 인자를 평가하여 시간별행동양식에 따른 24 시간 개인노출수준을 시간가중 평균모델을 이용하여 예측하고 비교 ${\cdot}$ 평가하였다. 본 연구는 154kV 고압 송전선로가 초등학교 옥상을 통과하는 B 초등학교 125명을 최종 선정하여 2003년 7월부터 2004년 2월 말까지 실시하였으며, 시간가중평균모델을 바탕으로 하여 자기장 노출량 평가 모델을 개발하였다. 전체 연구대상자들의 미세환경 내 평균 자기장값으로 계산한 시간가중 평균모델 (TWA model II)을 이용하여 예측된 자기장 개인노출수준을 보면 실측된 개인노출수준과 약간의 상관성을 보였다(Pearson r = 0.34 ${\sim}$ 0.35). Spot 측정한 값과 24 시간 stationary 측정값을 이용한 TWA Model II-2로 예측한 결과 실측값간의 상관성이 0.65 ${\sim}$ 0.85 로 산출되어 TWA 모델 중 가장 실측값을 잘 설명하였다.
There are many factors that influence the image quality of CMOS camera images, among which the image exposure time is an important factor. If the image exposure time is long, the entire image on the screen becomes brighter. If the exposure time is shorter, the entire image becomes darker. When photographing a still image, real time is not required because the automatic exposure system is given sufficient time to obtain an appropriate exposure time. However, if the surroundings and environment change rapidly like the black box of a driving car, the exposure time should be applied in response to real time. To this end, a robust automatic exposure system for real-time performance and ambient light environment is required. An automatic exposure system that has real-time capability and is robust against the ambient light environment is required. we designed a real-time control sysem capable of parallel operation processing through the design of an embedded system using zynq's logic and ARM core, and developed a real-time CMOS automatic exposure system that is robust to noise and converges to a desired target value within 66 ms through PID control.
Park, J.-H.;Seon, K.-I.;Ryu, K.-S.;Yuk, I. S.;Jin, H.;Lee, D.-H.;Oh, S.-H;Seon, J.;Nam, U.-W.;Han, W.;Lee, W.-B.;Min, K.-W.;Edelstein, J.;Korpela, E. J.
Journal of Astronomy and Space Sciences
/
v.18
no.3
/
pp.209-218
/
2001
Global exposure time distribution through all-sky survey, one of main science missions of KAISTSAT-1, has been simulated. Exposure time distribution has its minimum on the celestial equator and increases with moving to polar regions according to the present mission operation scenario. SAA (South Atlantic Anomaly) and the moon can make further decreases of exposure time around the celestial equator Effects of SAA on all-sky survey exposure time can be compensated with a simple observational scheduling, orbit exchange between orbits allocated to all-sky survey passing through the SAA region and ones allocated to upper atmosphere observations not affected by SAA. It, however, seems that present exposure time distribution is not adequate for the concrete study of the evolution of interstellar medium. A scheme for active time allocation is needed for redistribution of exposure times weighted around the celestial poles, and additional studies on the advanced mission operation and the observational scheduling are also needed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.