• 제목/요약/키워드: 노지

검색결과 996건 처리시간 0.031초

미국남서부지역 선사시대 수혈주거지의 방향과 열효율과의 관계 검토

  • 강봉원
    • 고문화
    • /
    • 66호
    • /
    • pp.57-86
    • /
    • 2005
  • 이 논문은 미국의 남서부지역(대략, 애리조나 주, 뉴-멕시코 주, 콜로라도 주, 그리고 유타 주 등에 해당)에서 발굴 조사된 수혈주거지들의 방향을 열효율과 연계하여 연구한 것이다. 이 지역 선사시대 수혈주거지에 거주했던 사람들은 주거지 내부에 있었던 작은 노지(爐址) 이외에 다른 난방시설이 없었기 때문에 고고학자들은 이 지역 주민들이 주거지를 설계할 때 자연난방인 태양열을 이용하였을 것이라고 추정하고 있다. 이 아이디어를 고고학 자료를 통하여 검증하기 위하여 기원 전후부터 기원 후 미국 남서부 지역에서 가장 주도적인 역할을 하였던 원주민들의 호호캄(Hohokam, 남부 애리조나 지역), 아나사지(Anasazi, 북부 애리조나, 뉴-멕시코, 남서 콜로라도와 남동 유타에 걸쳐져 있던 四隅지역), 그리고 머기욘(Mogollon, 남동 애리조나와 남서 뉴-멕시코 지역) 문화 유적지에서 발굴조사된 수혈주거지들의 깊이, 모양, 그리고 방향에 대해서 검토하여 보았다. 동시에 수혈주거지의 방향의 해석과 관련된 하부구조적 측면과 관념적 측면의 두 가지 상반되는 견해에 대해서 검토하여 보았다. 이들 지역에서 발굴조사된 주거지들의 방향을 분석하여 보아 일관성 있게 남쪽으로 난 주거지들의 방향이 초자연적인 의미를 내포한 것 이라기보다는 적응의 전략으로서 태양열의 이용을 염두에 두었을 가능성이 더 높다는 것을 주장하였다. 주제어: 선사시대, 미국 남서부 지역, 고고학, 건축, 수혈주거지, 방향, 태양열, 실용성, 상징성ン?⨀⣳?⨀㋳?⨀?⨀

  • PDF

레이저 멀티 펄스 중첩과 회절광학소자를 이용한 숨쉬는 필름 고속 가공 기술 (High speed laser machining for breathable film using multi-pulse repeated radiation and diffractive beam splitter)

  • 유동윤;최훈국;손익부;노영철;이용탁;김영재;김영한;강호민;노지환
    • 한국레이저가공학회지
    • /
    • 제17권3호
    • /
    • pp.15-18
    • /
    • 2014
  • In this paper, we studied a machining method using a diffractive beam splitter (DBS) and multi- pulse repeated radiation for breathable film. We fabricated micro-grooves on polypropylene (PP) films using multi-pulse radiation and one-shot radiation (radiating pulses at once) and a DBS. In the result, width and depth of the PP film using multi-pulse repeated radiation were more precisely controllable. Therefore, this method can be applicable to in manufacturing breathable film precisely at a high speed.

  • PDF

3차원 레이저 스캐너를 이용한 인쇄롤 가공에 관한 연구 (Study on Printing Roll Manufacturing by using 3 Dimensional Laser Scanner)

  • 강희신;노지환;손현기
    • 한국레이저가공학회지
    • /
    • 제16권4호
    • /
    • pp.17-23
    • /
    • 2013
  • The research for the development of roll-to-roll printing process is actively underway on behalf of the existing semiconductor process. The roll-to-roll printing system can make the electronic devices to low-cost mass production. This study is performed for developing the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser engraving technology is used to create printable roll and the printable roll is made out of the chrome coated roll after coating copper and polymer on the surface of steel roll, ablating the polymer on the surface of roll and etching the roll. The 3 dimensional laser scanner and roll rotating systems are constructed and the system control program is developed. We have used the fiber laser of 100 W grade, the 3 dimensional laser scanner and the 3 axes moving stage system with a rotating axis. We have found the optimal conditions by performing the laser patterning experiments and can make the minimum line width of $24{\mu}m$ by using the developed 3 dimensional laser scanner system.

  • PDF

분담편목에 대한 공공도서관의 인식과 참여 - 국가자료종합목록시스템(KOLIS-NET)을 중심으로 - (Meanings and Values of KOLIS-NET in Public Libraries)

  • 노지현;이수상
    • 한국문헌정보학회지
    • /
    • 제40권2호
    • /
    • pp.195-216
    • /
    • 2006
  • 국가자료종합목록시스템(KOLIS-NET)은 국립중앙도서관이 주체가 되어 전국의 공공도서관이 참여하여 구축하고 있는 분담편목시스템이다. 이 연구는 공공도서관에서 목록을 생산하는 일반적인 절차와 방법에 주목하면서 그들의 분담편목에 대한 인식을 살펴보고, KOLIS-NET을 활성화하고 공공도서관의 적극적인 참여를 유도하기 위해서는 무엇을 어떻게 해야 하는지를 궁리하는데 궁극적인 목적을 두었다. 연구에 필요한 데이터는 방문조사와 면담조사, 설문조사를 통해 수집하였으며, 설문조사에는 전국의 216개 공공도서관 편목담당사서들이 참여하였다.

초발수 곡면표면 실리콘 사출금형성형기술 (Silicone Injection Mold & Molding Technology for Super-hydrophobic Curved Surface)

  • 이성희;강정진;이종원;홍석관;고종수;이제훈;노지환
    • 한국정밀공학회지
    • /
    • 제29권1호
    • /
    • pp.13-18
    • /
    • 2012
  • In this study, silicone injection molding technology with curved thermoplastic insert was developed to produce super-hydrophobic surface. Thermoplastic insert part and injection mold design of base plastic cover were performed to produce cost effective hydrophobic surface part. An optimization process of part thickness for thermoplastic insert part was performed with transient thermal analysis under silicone over-molding process condition. Structural thermal analysis of silicone injection mold was also performed to obtain uniform temperature condition on the surface of micro-patterned mold core. Super-hydrophobic surface for the silicone injection molded part with thermoplastic insert could be verified from the measurement of contact angle. It was shown that the averaged contact angle was over $140^{\circ}$.

만성적 경과관찰을 보이는 Guillain-Barré Syndrome 환자 1례 (A Clinical Case Study of Guillain-Barré Syndrome with Chronic Progression)

  • 노지애;장재원;이기언;홍정수;김동진
    • 대한한방내과학회지
    • /
    • 제39권1호
    • /
    • pp.76-83
    • /
    • 2018
  • Objectives: This case study reports on one patient presenting atypical and chronic disorders after being diagnosed with $Guillain-Barr{\acute{e}}$ Syndrome (GBS). Methods: One patient was treated by Yeongseonjetong-eum-gami, Taklisodok-eum-gami, electroacupuncture, and physical therapy. Any improvement in symptoms was assessed by measuring changes in the motor grade of upper limb weakness, the numerical rating scale (NRS) of lower limb numbness, and GBS scores. Results: After 24 days of treatment, the patient's symptoms of GBS showed little improvement. Conclusions: Traditional Korean medical treatment appeared to be effective in reducing GBS symptoms, but more research is required to confirm these results. When treating GBS patients, the clinician should put effort into distinguishing GBS from other nervous disorders, such as acute onset Chronic Inflammatory Demyelinating Polyneuropathy (CIDP).

제주도 농업용 관정의 양수량 산정과 지하수 이용특성 연구

  • 박원배;고기원;김봉석;문덕철;양성기
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.110-113
    • /
    • 2004
  • 제주도내에 개발ㆍ이용 중인 사설 농업용 44개 관정을 대상으로 2002년 11월부터 2003년 11월까지 1년간 지하수 이용량 모니터링 조사를 실시하였다. 재배작물 유형별 지하수 이용특성을 평가한 결과, 밭작물은 대체로 9월에서 11월 초순까지 집중적으로 지하수를 이용하고 있으며, 시설하우스의 경우에는 2월에서부터 10월말까지 비교적 지속적으로 지하수를 이용하고 있는 것으로 분석되었으나, 노지 감귤원은 가뭄이 아닌 경우에는 농약살포시 매우 소량의 지하수를 이용하고 있으며 이용시기도 매우 불규칙한 것으로 조사되었다. 평균 총 가동 일수는 시설하우스 및 밭작물에 혼용으로 사용하고 있는 지하수 관정의 128일로 최대치를 나타내고 있으며, 연간 지하수 총 이용량의 경우도 관정 가동 일수와 같은 경향을 나타내고 있다. 단위 면적(ha) 당 지하수 일 평균 이용량은 시설하우스가 74m$^3$/일으로 가장 많았고 밭작물이 50m$^3$/일로 조사되었다. 원격검침 시스템에 의해 얻어진 모니터링 테이터로부터 산정된 양수량과 계량기 검침에 의한 양수량과의 관계를 비교 분석한 결과, 상관계수가 $R^2$ =0.997을 나타내 수중모터펌프 가동시간 모니터링에 의한 양수량 산정방법이 매우 유효함이 입증되었다.

  • PDF

도서관목록에서 폭소노미 적용의 의미와 한계 (Meaning and Limitations of Folksonomy in Library Cataloging)

  • 노지현
    • 한국도서관정보학회지
    • /
    • 제40권4호
    • /
    • pp.381-400
    • /
    • 2009
  • 이 연구는 폭소노미에 대한 우리 도서관계의 보다 근원적인 이해를 도모하고, 그를 통해 우리 도서관의 실정에 보다 적합한 폭소노미에 대한 접근 및 수용 방법을 강구해 보고자 하는데 목적이 있다. 구체적으로, 이 연구는 관련 문헌에 대한 조사와 분석에 근거하여, (1) 폭소노미가 등장하게 된 배경과 그에 내재된 철학적 의미를 도서관목록의 전통적 의미에 견주면서 살펴보고, 이어 (2) 폭소노미를 바라보는 북미 문헌정보학계의 관점과 도서관 현장에서의 구체적인 적용 사례를 소개하고, 더불어 (3) 폭소노미의 적용 결과를 둘러싼 북미 도서관 현장에서의 유용성 논의에 대해 분석함으로써, 긍극적으로 (4) 폭소노미의 수용에 앞서 우리 도서관계가 고민해야할 과제와 취해야 할 전략에 대해 논의하였다.

  • PDF

농촌주민이 원하는 보건교육의 내용과 방법 (A Study on the Content and Methods for Appropriate Health Education of Rural People)

  • 유승흠;손명세;조우현;노지영;박종연
    • 보건교육건강증진학회지
    • /
    • 제6권1호
    • /
    • pp.66-74
    • /
    • 1989
  • The purpose of this study was to determine appropriate training content and methods for a health educational program for rural people by analysing data collected through a structured interview survey with the rural people of Kangwha county in June, 1987, The variables analyzed for the educational content were the diseases of greatest concern and the most urgent health problems, and for the educational methods, the health educator, place of education and types of educational media were analyzed. The results are as follows: 1. The disease of greatest concerned was gastroenteritis(22.6%), followed by diabetes(13.7%), and hepatitis (10.2%). The respondents with old age and less education were more concerned with arthritis, and those with higher education were more concerned with diabetes. 2. The most urgent health problem was agricultural chemical poisoning(46%), followed by smoking(12.8%), and the lack of balance between meals and nutrition(8.8%). The people with less education and with higher income were less concerned with agricultural chemical poisoning and smoking. 3. Of the respondents, 77.4% wanted to be educated by physicians and the village auditorium was the most preferred place of education. Education in a lecture format was desired by 36.3% of respondents. Personal counselling was more preferred by old and less educated people, and people with higher education preferred printed matters.

  • PDF

FJB 파형을 이용한 SAR 영상 생성 기법 분석 (Analysis of SAR Processing Performances with FJB Waveforms)

  • 김은희;노지은;박준용;김수범
    • 한국전자파학회논문지
    • /
    • 제28권3호
    • /
    • pp.195-207
    • /
    • 2017
  • 항공기 레이다에서는 고해상도 SAR 영상에서 지상의 이동 표적을 탐지하는 SAR-GMTI 모드의 운영이 점점 필수적으로 되고 있다. SAR는 고해상도 영상을 위하여 광대역 파형을 필요로 하는 반면, GMTI는 도플러 추출을 위하여 협대역의 파형을 필요로 하기 때문에 일반적인 LFM 파형은 사용에 어려움이 있다. 본 논문에서는 최근 들어 SAR-GMTI 모드의 파형으로 연구되고 있는 FJB(Frequency Jump Burst) 파형의 특성을 분석하였고, FJB 파형을 사용한 펄스압축과 SAR 영상생성을 위한 방법들을 구현하였으며, 시뮬레이션을 통하여 펄스압축과 SAR 영상에서 단일 LFM을 사용할 경우와 성능에서 거의 차이가 없음을 보였다. FJB 파형은 SAR와 GMTI 처리를 동일한 파형으로 수행할 수 있기 때문에 본 결과를 적용하면 항공기 레이다에서 SAR-GMTI 모드의 처리를 보다 효율적으로 수행할 수 있다.