• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.774-779
• /
• 2008

An experimental study on the micro-supersonic jet flow fields has been carried out. A sonic nozzle of 440 ${\mu}m$-exit diameter and a Laval nozzle of 800 ${\mu}m$ exit diameter with the nozzle exit Mach number 2.0 were fabricated by stretching a micro Pyrex glass tube for the present experiments. Schlieren flow visualization and Pitot pressure distribution of the jet flow field were obtained. Representative characteristics of the jet flow fields such as, supersonic length, jet core length, similarity of the velocity field, and jet spreading rates, have been observed. All the results were compared to previous observations of larger supersonic jets of higher Reynolds numbers, and it was found that overall characteristics of the micro supersonic jet are qualitatively similar as those of the higher Reynolds number jets, except the jet core length and the jet spreading rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.19-28
• /
• 2017

Effects of cavitation and hydraulic flip in circular and elliptical nozzles on the flow characteristics have been studied. Spray tests were conducted using injectors with different ratios of an orifice length(L) to a diameter(d) and of a major axis diameter(a) to a minor axis diameter(b). With the increment of an injection pressure drop, discharge coefficients slightly decreased in cavitation flows, and those suddenly dropped and were almost constant in hydraulic flip flows. For elliptical nozzles with L/b > 8 and L/a < 8, discharge coefficients and flow patterns showed different results from those in previous circular nozzles. When a flow in the elliptical nozzle was under steady condition, as the liquid column went downstream from the nozzle, its spray angle a little decreased in the plane of a major axis and increased in the plane of a minor axis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1361-1369
• /
• 2013

This study performs a computational fluid dynamics (CFD) analysis of the inner flow of a multihole injector nozzle by using ANSYS CFX 13.0. Based on the obtained results, a design of experiment (DOE) was performed and applied to investigate the effects of injector nozzle design parameters on cavitation. To analyze the design sensitivity and signal-to-noise ratio (S/N ratio), the hole diameter, hole length, hole angle, and K-factor of the nozzle hole were selected as design parameters, and the effect of these parameters was investigated at 16 experimental points. Consequently, it was found that the effect of the K-factor on the cavitation and inner flow of the injector nozzle is the greatest. Thus, the selection of a suitable K-factor is important in nozzle design considering cavitation flow.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.281-286
• /
• 2007

The Navier-Stokes equations are numerically solved for a two-dimensional small nozzle with the area ratio of 1.8 between the throat and the exit. The shock structures are verified inside the nozzle and near the exit varying with the pressure ratio and the length of the diverging part, respectively. Especially the irregular patterns in the pressure distribution near the throat are analyzed based on the geometric characteristics. It is found that there are similar phenomena in the shock wave structure between the pressure ratio and the length changes. Also there exists a normal shock just between two different oblique shocks crossing each other in special cases.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1032-1034
• /
• 2005

초고압 차단기 내부에는 여러 종류의 절연물들이 존재하며, 절연물들중 노즐은 차단현상에 큰 영향을 미치는 요소 중에 하나로 작용을 하고 있다. 노즐의 형상과 노즐 목의 길이, 노즐의 재질에 따라 전계강도의 차이와 유동의 흐름에 영향을 미치고 있으며 결국 차단기의 차단성능의 변화를 발생시킬수 있다. 따라서 본 논문에서는 서로 다른 형상의 노즐을 가지고 차단기 내부 접점의 이동에 따른 스트로크별 해석 데이타와 시험 데이타를 비교함으로써 절연성능의 변화를 연구하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.94-104
• /
• 2013

A numerical analysis has been conducted to determine the pitch thrust vectoring characteristics of a two-dimensional convergent divergent exhaust nozzle for supersonic aircraft application. The numerical analysis was done by using Fluent and verified by the experimental test results. Analysis was performed with pitch angle of $0^{\circ}$ and $20^{\circ}$ each at the ambient temperature condition. To see the effect of a ratio of pitch flap length and pitch flap height, the ratio was varied from 0.5 to 2.5. The numerical analysis shows that pitch thrust is changed greatly with pitch flap length. The big difference of the pitch thrust with pitch flap length is due to the shock interactions in the nozzle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.51-58
• /
• 2006

The spray characteristics of liquid jet injected into subsonic cross-flow were investigated experimentally. Spray trajectories were captured using CCD camera. Droplet sizes were measured using PDPA and Image Express. The nozzle diameter was 0.5 mm, and its length-to-diameter ratios (L/D) ran$4.11{\times}10^6$ged from 1.0 to 6.0. Experimental results indicate that the breakup point is delayed by increasing gas momentum ratio and the penetration length is decreased by increasing Weber number. At low injection angle(${\theta}$ < $90^{\circ}$), Weber number is dominant parameter for trajectories, but at high injection angle(${\theta}$ > $90^{\circ}$), L/D is dominant parameter for trajectories rather than Weber number.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1005-1012
• /
• 2011

The purpose of this study was to investigate the internal nozzle flow and cavitation characteristics numerically in both circular and elliptical nozzles. The program FLUENT 6.2 was used to perform the numerical simulation of the cavitating flow in the nozzles. A comparison was made between the cavitation shapes predicted numerically and those found experimentally in order to validate the numerical solution. This study showed that the cavitation in the circular nozzle had a cylindrical shape that was symmetrical with the nozzle axis. However, the cavitation in the elliptical nozzles had a horseshoe-like shape. In addition, the radial velocity distribution varied between the major and the minor axis planes when the working fluid was flowing into the inlet.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.70-77
• /
• 2000

Supersonic Dual Bell Nozzle (SDBN) is an altitude-adaptive propulsion nozzle achieved only by a nozzle wall inflection. In order to investigate the altitude adaptive capability and the effectiveness of this nozzle concept, the present study addresses a computational work of the flow through SDBN. Several types of the SDBNs are tested for a wide range of the pressure ratio which covers from an over-expended flow to a fully under-expended flow at the exit of the SDBN. Axisymmetric, compressible, Wavier-Stokes equations are numerically solved using a fully implicit finite volume differencing scheme. The present computational results reveal that the base nozzle length affects the shock wave system occurring inside SDBN. For a quit wide range of the pressure ratio the flow separation occurs at the nozzle inflection point. It is found that the maximum thrust coefficient is obtainable for the correct expansion state at the exit of SDBN.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.844-854
• /
• 2017

The Expansion-Deflection(E-D) nozzle is a nozzle that has a performance gain through the altitude compensation effect by changing the effective area within the nozzle according to the altitude. An E-D nozzle has been known to reduce the length of the nozzle and achieve the payload gain of the launch vehicle. Due to the potential advantages of an E-D nozzle, related research has been carried out in the United Kingdom, Germany, Australia and Europe etc. In the UK, the flow characteristics of the E-D nozzle and the performance comparison with the dual-bell nozzle which is altitude compensation nozzle were studied. In order to understand the transition characteristics of the E-D nozzle in DLR, the transition characteristics according to the nozzle pressure ratio change were analyzed. In Europe, numerical study using the E-D nozzle concept on upper stage of the launch vehicle Ariane 5 ESC-B was carried out to confirm the possibility of payload gain according to the nozzle length reduction. In this paper, research trends of an E-D nozzle performed outside the country are classified and analyzed according to their characteristics and utilized as basic data of E-D nozzle research in the future.