• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.462-465
• /
• 2014

It is well known that tire/road factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire/road factors on the pass-by noise performance of tire labeling has been carried out through experimental tests. The tire pass-by noise is affected by road characteristic factors, especially greatly influenced by road friction coefficient, and the next dominant factor is road chipping size. For several authorized pass-by noise test tracks, the pass-by noise correlation test has been done to know the test site effect, which results in 2~3dB(A) variation of pass-by noise level. Finally, it is shown that the winter tire is differently influenced by the pass-by noise test track characteristics, as compared to all-season tire and summer tire.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• 타이어
• /
• 통권69호
• /
• pp.12-16
• /
• 1977

타이어의 실노면상에서의 트랙션성능을 측정, 평가하는것은 자동차의 발진, 가속, 제동 및 시회성능의 점으로브터 중요하면 이것을 측정하기 위해서 타이어 트랙션시험차를 개발했다. 이시험차는 타이어의트랙션성능을 미끄럼율과제동, 구동계수의 관계, 횡화각과 사이드포오스계수, 어라이닝토루크의 관계로 측정되는 특장을 갖는다. 이시험차를 이용해서, 건조및 습윤아스팔트노상과 설노상에서의 트랙션성능에 대한 타이어트랫드의 기본적 페턴의영향을 측정한 결과, 다음과 같은 지견을 얻었다. (1)도로의 상태의 상위에 의한 타이어트랙션 성능은 건조상태에선 습윤상태보다 크며 노설상에선 전양자보다 훨씬 작다. (2)트랫드의 종방향의 구본수의 영향에 대해선 여하한 노면상태에서든 구본수가 증가한만큼 트랙션성능은 증가하나 어느구본수에선 포화하는 경향이 있다. (3)설노상에서의 트랫드의 구각도에 대해서는 구의각도가 타이어의 진행방향에 대해서 직각의 페턴이 좋다고 할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1723-1726
• /
• 2003

Clean and well maintained roadway signs are important for preserving driver's safety. The existing signs on the roadway must be periodically re-painted in order to maintain clean state. However, current sign painting operations are manually performed now. These are very slow and workers are exposed to very dangerous and hazard working environment. In this paper, we present the method for automating this job with gantry robot and spray system. In addition, we suggest two design concepts to resolve the problem that it is impractical to make the gantry system so big as to cover whole lane width. In order to show the validity of this system, the painting operation is simulated and experimentally executed.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.47-57
• /
• 2007

The vibration environment essentially companied by vehicle operation on the road is determined by the shape of road surface, which is called profile. In general, the profile and severity of unpaved road is an important issue in the reliability of durability test for vehicles. In order to maintain severity of unpaved road, it is necessary to develop profilometer system. We developed profilometer system which is composed of data processing computer, power unit, air compressor and sensors. This paper focuses on the severity management of unpaved test courses using neural networks. This paper presents the maintenance range for cross-country course in CPG(Chang-won Proving Ground) and the evaluation of similarity degree between unpaved roads.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1518-1523
• /
• 2003

Automation of roadway sign painting offers more safety for workers, shortening of work period, etc., compared with manual painting. In this study, an automated system using a gantry-type robot was developed for roadway sign painting which has been done manually. Any characters (Korean and English) as well as symbols can be painted by the system. A simulator was also developed, which can show the painted results in advance. The developed system performed well, and the signs painted by the system were found to be as accurate as those made by the simulator.

• 대한교통학회지
• /
• 제21권2호
• /
• pp.155-164
• /
• 2003

현재 국내에서는 교통사고 재현 방법이 노면 흔적물에 의존하여 이루어지고 있고, 노면 흔적물이 없는 경우 교통사고 재현은 불가능하게 된다. 이러한 단점을 보완하기 위해 외국에서는 충돌모델을 이용한 교통사고 재현프로그램을 활용하고 있는 추세이다. 현재 우리나라에서 가장 많이 사용하는 교통사고 재현 프로그램 PC-CRASH를 활용하기 위해서는 각 사고마다 알맞은 충돌특성 인자 값을 사용자가 직접 입력하여 사용하여야 하나, 이를 활용할 수 있는 활용자료가 부족한 실정이다. 본 연구는 국내에서 실제 발생된 교통사고 사례에 대해 교통사고 재현 프로그램인 PC-CRASH와 충돌에 영향을 미치는 충돌 인자들로 교통사고를 재현하였고, 차량의 최종위치간 거리와 자세에 어떠한 영향을 미치는가를 알아보았다. 또한 실제 역 해석을 하기 위해 차량의 최종위치와 자세만으로 각각의 사례에 적절한 인자값을 추정할 수 있는 회귀식을 구성하였고, 통계적으로 신뢰성을 검증하였다. 사고 재현에 필요한 주요 충돌인자들의 초기치 설정시 추정식을 이용할 경우, 사고 재현 프로그램 활용 시, 시간 단축 효과를 프로그램 내부에 있는 유전자 알고리즘의 반복횟수로 추정식의 통계적 검증을 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.581-586
• /
• 2014

In general vibration test considers both harmonic vibration and random vibration, When developing the vehicle component. But the effect of harmonic vibration is larger in the parts around the vehicle engine, sole testing the harmonic vibration is considered. In this study, the fatigue damage of the linear system fixed around the engine is analyzed when the effect of random vibration is higher, harsher than the normal road surface condition. In condition the vehicle speed and the engine RPM are similar, the higher the harshness of the road surface condition is, the larger the fatigue damage level is. Therefore both random vibration and harmonic vibration must be considered in vibration test of components around the engine. Proposing the sine on random(SOR) vibration test that can exam considering both of vibrations, harmonic and random.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.78-85
• /
• 2013

This paper presents the sliding mode control methods for anti-lock brake system (ABS) with the friction force observer. Using a simplified quarter car model, the sliding mode controller for ABS is designed to track the desired wheel slip ratio. Here, new method to find the desired wheel slip ratio which produces the maximum friction force between road and tire is suggested. The desired wheel slip ratio is varying according road and tire conditions to produce maximum friction force. In order to find optimum desired wheel slip ratio, the sliding mode observer for friction force is used. The proposed sliding mode controller with observer is evaluated in simulation, and the control design is shown to have high performance on roads with constant and varying adhesion coefficients.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.199-207
• /
• 1999

For the stress and vibration analysis of vehicle component by computer simulation, it is necessary to find the forces acting on the vehicle components due to the road profile undulation. A precise modeling of tires is not easy due to nonlinear effects between tire-ground. In this study, a new method is proposed to regenerate road profiles that preserves the same PSD of wheel with a linear tire model. Using the frequency response function between road-wheel , the digital signal processing method, and DADS program , road profile is regenerated from the computer simulation.