• 한국음향학회지
• /
• 제14권5호
• /
• pp.11-19
• /
• 1995

본 논문에서는 불규칙한 노면이 설치된 섀시 동력계(chassis dynamometer)로 부터 가진된 타이어의 구조 진동 소음을 음장의 공간적 변환기법을 이용하여 측정하였다. 음장의 공간적 변환기법은 소음원으로 부터 원거리까지의 전파를 계산하는 기법이다. 즉, 한평면의 음향 측정으로 부터 측정 평면에서 멀리 떨어지거나 더 가까운 평면에서의 음장을 표현하는 변수들인 음압, 음향 인텐시티, 입자속도 등을 계산한다. 측정 평면에서 음원쪽으로 가까운 평면의 계산은 관접음장 홀로그래피를 적용하여 계산하고 먼 쪽은 헬름흘쓰 적분식을 적용한다 측정결과로 부터 타이어 구조 진동 소음의 방사형태와 소음원의 위치를 예측하였다.

• 한국도로학회논문집
• /
• 제11권2호
• /
• pp.1-15
• /
• 2009

골재노출콘크리트포장은 콘크리트 타설 직후 포장표면에 응결지연제를 살포하여 표면으로부터 깊이 2$\sim$3mm 정도의 모르타르 경화를 늦추게 한 후 표면의 모르타르 제거를 통해 굵은골재를 포장표면에 노출시키는 공법이다. 골재노출콘크리트포장의 타이어-노면 소음이 일반 콘크리트포장보다 작으면서도 적정한 미끄럼저항을 장기간 유지한다는 장점을 가지고 있다. 특히 굵은골재가 소입경일수록 소음저감효과가 우수한 것으로 알려져 있다. 성공적인 소입경 골재노출콘크리트포장의 건설을 위해서는 굵은골재의 최대입경이 적정하여야 하며, 적정량의 굵은골재를 포장표면에 균일하게 노출하도록 해야 하며 이를 위한 적절한 배합과 노출기법의 도출이 요구된다. 일반적인 콘크리트포장의 배합기준은 강도설계로 이루어지지만 소입경 골재노출콘크리트포장의 경우 강도뿐만 아니라 소음저감효과, 미끄럼저항을 적절히 발현시킬 수 있는 배합설계를 실시하기 위해서는 강도실험 외에도 노면의 미끄럼저항, 소음을 고려할 필요가 있다. 본 연구에서는 소입경 골재노출콘크리트포장에 대하여 적정 강도를 유지하며 포장표면조직의 소음 저감효과 및 적정 미끄럼저항성을 동시에 만족시킬 수 있도록 표면조직을 형성할 수 있는 최적배합에 대해 제시하였다. 또한 콘크리트포장은 온도, 습도 및 대기환경에 의해 모르타르의 경화속도가 달라지므로 콘크리트의 물리적 성질을 정량적으로 고려한 최적 노출기법이 제시되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.266-269
• /
• 2006

Tire is in charge of a lot of function, which is supporting vehicle load, transferring traction and. brake, absorbing impact by road etc. As the silence of vehicle increase more important, the importance of tire noise is more raised. In recent, the study on reduction of tire noise is generally processed. Tire noise is divided in structure home noise and all borne noise. Tire tread properties have a lot of multiplicity. Rubber properties are caused by changing or tread hardness. That change Elastic Modulus and Loss Modulus, which is related by tire noise. In the study, we found that road noise is affected by tread hardness

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.115-119
• /
• 2007

In this paper, practical problems will be covered in applying preview control to real tracked vehicle systems. Previous researches about the preview control assume that the vehicle speed is constant and the actuators have full frequency bandwidth. However, in order to apply it to real systems, those should be taken into account. Therefore this paper show the algorithm to apply the preview control to speed changing vehicles and performance variation according to a restricted frequency bandwidth.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.46-51
• /
• 1994

자동차용 MCP(Multi Changer Player)는 조용하고 깨끗한 음악을 감상하고 싶어하는 소비자들에게 큰 호응을 얻고 있다. 그러나 주행중에 외력이 자동차용 MCP 데크를 통하여 클렘핑부(Clamping부 : 이하 방진부라 함)에 전달되어 방진부에 진동이 발생할 수 있다. 이때 방진부에 장착되어 있는 CD(Compact Disc)의 음재생에 영향을 줄 수 있다. 따라서 본 연구에서는 자동차용 MCP 데크 메카니즘의 중요 구성 부분인 방진부를 설계 및 실험 해석에 의해 진동 저감 대책을 세움으로써 기초 자료를 확보하고 제품의 성능을 향상시키고자 한다. 자동차용 MCP 데크에 장착된 방진부의 진동 저감 문제를 해결하기 위해 먼저 다음과 같은 사항이 방진부에 미치는 영향도를 알아본다. 1) 아이들링(Idling) 중일때의 자동차의 특성과 주행중일때의 자동차의 특성 및 노면 외란이 진장부에 미치는 영향도를 파악한다. 2) CD가 클램핌되어 있을 때의 CD의 모드를 해석해 본다. 그리고 방진재로 사용된 스프링의 설계 및 방진 고무의 물성치 변화에 따른 방진부의 특성변화를 실험에 의해 해석하여 적절한 방진재를 선정한다. 또한 결정된 방진재를 사용한 MCP의 음비(Sound Skip) 특성을 측정해본다.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.338-344
• /
• 1996

In this paper, a semi-active suspension adapting to road variation which also considers the frequency snesitivity of human is proposed. First, a road adapting controller composed of system identification and LQG control is designed. Using the extended least squares method, the road property is estimated by system identification as it varies, and the LQG controller considering the estimated road property and the frequency sensitivity of human is designed. Next, the semi-active suspension is made, which tracks the performance of the active suspension with the road adapting controller. Through numerical simulation, the performance of the proposed semi-active suspension is compared with that of a non-adaptive semi-active suspension with frequency-shaped performance index. As a result, we see that the road adapting semi-active suspension has better performance.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.137-144
• /
• 1995

The purpose of this study is to obtain a foundation data for chassis design and road noise reduction of automobiles. Using the combination of the automobile, radial tires and instrumentation equipment, experimental investigation was carried out to examine the characteris- tics of the structural vibration of tire as the key to obtaining the effective parameters for reducing road noise. From the results of this studies it has been confirmed that the specific ranges of natural frequency of tire exciting the suspension and chassis system. And the tire, axle and chassis natural frequency of automobile govern the road noise. Results show that material properties of tire and experimental condition are major parameter for shifting of tire natural frequency. These results would be utilized as basic materials for the design of chassis design with papametric study, which enables a designer of an automobile to foresee the influence of the various design factors or operating conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.9-16
• /
• 2013

PURPOSES: There is a need to develop a method to incorporate tire-pavement noise in the pavement management system. Tire-pavement noise highly depends on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information to predict tire-pavement noise. This study aimed to find the relationship between tire-pavement noise and MPD(Mean Profile Depth) for concrete pavement. METHODS: MPD and tire-pavement noise were collected on the number of expressway sections including Central Inland Test Road in Korea. Statistical analysis was performed to find the correlationship between MPD and tire-pavement noise. In addition, multiple regression analysis to find the tire-pavement noise based on MPD and type of concrete pavement texture. RESULTS: Linear relationship between MPD and tire-pavement noise is observed for concrete pavement. Furthermore, a forensic equation to estimate tire-pavement noise based on MPD and texture types of concrete pavement is suggested. CONCLUSIONS: Tire-pavement noise on concrete pavement can be predicted based on the consideration of texture type and MPD estimation.