• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.19-31
• /
• 2007

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio and containing fly ash and blast furnace slag. Internal humidity change and shrinkage strain were about 10%, 10%, 7%, 11%, 11% and $320{\times}10^{-6}$, $270{\times}10^{-6}$, $231{\times}10^{-6}$, $371{\times}10^{-6}$, $350{\times}10^{-6}$ respectively on OPC30, O30F10, O30F20, O30G40, O30G50 and from the results, fly ash made humidity change and strain decrease but slag increase comparing with ordinary portland cement. Considering only relation internal humidity and shrinkage by self-desiccation, humidity change and shrinkage represented the strong linear relation regardless of mineral admixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.6
• /
• pp.53-67
• /
• 2002

The multimedia synchronization is one of the key issues to be resolved in order to provide a good quality of multimedia related services, such as Video on Demands(VoD), Lecture on Demands(LoD), and tele-conferences. In this paper, we introduce an adaptive multimedia synchronization algorithm using the level of buffers and load of servers, which are modeled and analyzed by ExSpect, a Petri net based simulation tool. In the proposed algorithm, the audio and video buffers are divided to 5 different levels, and the pre-defined play-out speed controller tries to make the buffer level to be normal in different temporal relations between multimedia streams using buffer levels and server loads. Because each multimedia packet is played by the pre-defined play-out speed, the media data can be reproduced within the permissible limit of errors while preserving the level of buffers to be normal. The proposed algorithm is able to handle and support various communication restrictions between providers and users, and offers little jitter play-out to many users in networks with the limited transmission capability. The performance of the developed algorithm is analyzed in various network conditions using a Petri net simulation tool.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2008

Humidity and strain were estimated for understanding the relation between humidity change by self-desiccation and shrinkage in high-performance concrete with low water binder ratio. Internal humidity change and shrinkage strain were about 10%, 4% and $320\times10^{-6}$, $120\times10^{-6}$ respectively on concrete with water binder ratio 0.3, 0.4 and from the results, humidity change and shrinkage represented the strong linear relation regardless of mixture. For specifying the relation on internal humidity change and autogenous shrinkage strain, shrinkage model was established which is driven by capillary pressure in pore water and surface energy in hydrates on the assumption of a single network and extended meniscus in pore system of concrete. This model and experimental results had a similar tendency so it would be concluded that the internal humidity change by self-desiccation in HPC originated in small pores less than 20 nm, therefore controlling plan on autogenous shrinkage might be focused on surface tension of water and degree of saturation in small pore.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.578-585
• /
• 2012

Location tracking system through GPS and Wi-Fi is available at no additional cost in an environment of IEEE 802.11-based wireless network. It is useful for many applications in outdoor environment. However, a previous systems used for general device to tag. It is unsuitable for power aware location tracking system because general devices is more expensive and non-optimized for tracking. The hand-off method of IEEE 802.11 standard is not enough considering power consumption. This thesis analyzes the previous location tracking systems and proposes power aware system. First, we designed and implemented tag to optimize location tracking. Next, we propose low-power hand-off method and low-power behavior model in implemented tag. The proposed hand-off method resolve power problem by using the location information and behavior model minimize power consumption of tag through power-saving mode and the concept of duty cycle. To evaluating proposed methods and system performance, we perform simulations and experiments in real environment. And then, we calculate tag's power consumption based on the actual measured current consumption of each operation. In a simulation result, the proposed behavior model and hand-off method reduced about 98%, 59% than the standard's hand-off and default behavior model.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based chemical sensor was developed on a $41^{\circ}YX\;LiNbO_3$ piezoelectric substrate for simultaneous measurement of $CO_2$ gas and relative humidity (RH) using a reflective delay line pattern as the sensor element. The reflective delay line is composed of an interdigital transducer (IDT) and several shorted grating reflectors. A Teflon AF 2400 and a hydrophilic $SiO_2$ layer were used as $CO_2$ and water vapor sensitive films. The coupling of mode (COM) modeling was conducted to determine optimal device parameters prior to fabrication. According to simulation results, the device was fabricated and then wirelessly measured using the network analyzer. The measured reflective coefficient $S_{11}$ in the time domain showed high signal/noise (S/N) ratio, small signal attenuation, and few spurious peaks. In the $CO_2$ and humidity testing, high sensitivity ($2^{\circ}/ppm$ for $CO_2$ detection and $7.45^{\circ}/%$RH for humidity sensing), good linearity and repeatability were observed in the $CO_2$ concentration ranges of $75{\sim}375ppm$ and humidity levels of $20{\sim}80%$RH. Temperature and humidity compensations were also investigated during the sensitivity evaluation process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1206-1218
• /
• 1992

Token ring systems which control to switch the data stream of networks by passing the token have been widely used to medium access controls in many ring or bus topology LANs. The system could be modeled for analysis as single-server-multi-queue system of the cyclic service method. These concepts could be expanded to multi-token ring systems interconnected with single ring consisting of bridges implemented simply to be stored and transmitted. In the proposal for the performance analysis of the interconnected token ring system, in has been assumed M/G/1 queueing model that frame arrivals are the Poisson process at each station queue and frame sizes are independently and identically distributed. And the average time delays were analyzed mathematically for arbitrary frame transferred from source station to destination area. The time delay of the frame transmission could be explained as the sum of the average time which the token passed from arbitrary position to source station, such as the waiting time in the source station transferring the previous arrival frames, and the propagation time from source station to interdestinated point. These delays were given as the sum of the duration from inner and outer bridge queues, the time delays from inner and outer bridge queues, and the time from outer bridge queue to destination station. These results were investigated by varing parameters effected to total time delays. In the results, those factors to be effected to dominant the total time delays were increased were in the cases of the high arrival rates and the high ration of destination of the other outerring. The system were shown the time delays increased exponentially in spite of the priority service policy. In order to decreasing the number of outerrings and increasing the number of nodes in backbone relatively, so the systems could be decreased the total delay in the interconnected token ring system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.86-86
• /
• 2018

본 연구는 한국의 도시재생과 스마트 물 관리의 정책 분석을 위하여 도시재생과 스마트 물 관리의 등장 배경, 주요 현안 및 연계성을 모색하고 도시재생방안으로서 스마트 물 관리체계의 가능성을 검토하는 것을 목적으로 한다. 1950년대의 도시재건(Urban Reconstruction)과 1970~80년대의 도시재개발(Urban Renewal, Urban Redevelopment) 등의 정비 사업은 물리적 환경정비에 초점을 맞추었다. 그러나 1990년대 환경문제가 세계적 이슈로 등장하면서 교외지역 난개발 문제에 대한 대응책이 필요하게 되었고 도시의 물리 환경적, 산업 경제적, 사회 문화적 측면을 부흥시키는 도시재생 접근법이 출현하였다. 한국 정부는 2017년부터 시작한 '도시재생 뉴딜사업'의 일환으로 스마트 기술을 적용한 도시재생사업을 통해 스마트도시 선도국가 도약과 세계적 흐름에 부합하는 도시성장을 기대하고 있다. 1980년대 초 등장한 스마트 기술은 2000년대 들어와 스마트 도시, 스마트 인프라, 스마트 그리드 등의 분야로 확대, 진보하였다. 물 분야의 스마트 기술은 2009년 스마트워터그리드 이니셔티브(Smart Water Grid Initiative)의 발족과 함께 IBM, CISCO, Intel 등의 IT 기반 물 관리 워킹그룹 형성, Suez, Veolia, Siemens 등 수처리 기업의 스마트워터그리드 분야 진출 모색과 함께 발전하기 시작하였다. 이후 2012년 유엔 스마트 물 관리 포커스 그룹(ITU-T SG 5)의 스마트 물 관리 표준화 연구가 착수되었고 한국은 국토교통부 건설교통기술 연구 개발사업 중 하나로 스마트 물 관리 장기 연구 사업을 시작하였다. 스마트 물 관리는 수자원 및 상하수도 관리의 효율성 제고를 위하여 스마트 미터, 센서, 디지털지도제작 등 ICT를 이용한 차세대 물 관리시스템이라고 정의할 수 있다. 구체적인 대상 분야를 고려한다면 하천수, 우수, 지하수, 하폐수처리수, 해수담수 등 다양한 수자원의 관리, 물의 생산과 수송, 사용한 물의 처리 및 재이용 등 물 관리 전 분야를 포함한다. 그러나 스마트 물 관리의 용어와 개념을 처음으로 도입한 미국 등 선진국과 관련기업들은 스마트 물 관리를 '스마트 워터 미터, 센서, 첨단 모델링, 수문 지도제작, 스마트 관개농업, 자동화 로봇 등 다양한 기술을 통합적으로 운영하는 지능적인 수자원 관리를 위한 정보네트워크'로 정의한다. 일찍이 도시재생으로의 패러다임 전환을 실시한 영국 및 일본과 달리 한국의 도시재생은 개념, 구성요소, 범위, 사업방식 등의 여러 가지 측면에서 아직 형성단계에 있다. 또한 한국의 스마트 물 관리 논의는 개념정립 측면에서 심층적 논의가 거의 부재하였다. 기존의 논의들은 수자원 혹은 상하수도서비스 분야에서의 연구결과와 기술개발성과를 기계적으로 적용하고 확대하는 측면만을 부각시켰다. 그러나 이와 같은 스마트 물 관리에 대한 논의는 정보통신기술과 물 관리 서비스를 단편적으로 연결하고 적용범위를 제한할 수도 있다는 점에서 한계성이 있다. 본 연구는 국내외 문헌검토를 바탕으로 한국의 도시재생과 스마트 물 관리의 정책을 분석하고 지금까지 별개로 간주된 두 개념의 장점을 융합하여 향후 지속가능한 도시개발 사업으로서의 가능성을 검토하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.611-620
• /
• 2021

The maintenance industry is mainly progressing based on condition-based maintenance after corrective maintenance and preventive maintenance. In condition-based maintenance, maintenance is performed at the optimum time based on the condition of equipment. In order to find the optimal maintenance point, it is important to accurately understand the condition of the equipment, especially the remaining useful life. Thus, using simulation data (C-MAPSS), a prediction model is proposed to predict the remaining useful life of a turbofan engine. For the modeling process, a C-MAPSS dataset was preprocessed, transformed, and predicted. Data pre-processing was performed through piecewise RUL, moving average filters, and standardization. The remaining useful life was predicted using principal component analysis and the k-NN method. In order to derive the optimal performance, the number of principal components and the number of neighbor data for the k-NN method were determined through 5-fold cross validation. The validity of the prediction results was analyzed through a scoring function while considering the usefulness of prior prediction and the incompatibility of post prediction. In addition, the usefulness of the RUL prediction model was proven through comparison with the prediction performance of other neural network-based algorithms.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.167-176
• /
• 2021

With development of big data analysis technology, many studies to find social issues using texts mining techniques have been conducted. In order to derive social issues, previous studies performed in a way that collects a large amount of text data from news or SNS, and then analyzes issues based on text mining techniques such as topic modeling and terms network analysis. Social issues are the results of various social phenomena and factors. However, since previous studies focused on deriving social issues that are results of various causes, there are limitations to revealing the cause of the issues. In order to effectively respond to social issues, it is necessary not only to derive social issues, but also to be able to identify the causes of social issues. In this study, in order to overcome these limitations, we proposed a method of deriving the factors that cause social issues from texts related to social issues based on the theory of part of Korean linguistics. To do this, we collected news data related to social issues for three years from 2017 to 2019 and proposed a methodology to find causes based causal sentences based on text mining techniques.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.4
• /
• pp.1-13
• /
• 2021

The purpose of this study is to identify trends and potential themes of research on consumption of children and adolescents for 20 years by analyzing keywords. The keywords of 869 studies on consumption of children and adolescents published in journals listed in Korean Citation Index were analyzed using text mining techniques. The most frequent keywords were found in the order of youth, youth consumers, consumer education, conspicuous consumption, consumption behavior, and character. As a result of analyzing the frequency of keywords by dividing into five-year periods, it was confirmed that the frequency of consumer education was significantly higher betwn 2006 and 2010. Research on ethical consumption has been active since 2011, and research has been conducted on various topics instead of without a prominent keyword during the most recent 5-year period. Looking at the keywords based on the TF-IDF, the keywords related to the environment and the Internet were the main keywords between 2001 and 2005. From 2006 to 2010, the TF-IDF values of media use, advertisement education, and Internet items were high. From 2011 to 2015, fair trade, green growth, green consumption, North Korean defector youths, social media, and from 2016 to 2020, text mining, sustainable development education, maker education, and the 2015 revised curriculum appeared as important themes. As a result of topic modeling, eight topics were derived: consumer education, mass media/peer culture, rational consumption, Hallyu/cultural industry, consumer competency, economic education, teaching and learning method, and eco-friendly/ethical consumption. As a result of network analysis, it was found that conspicuous consumption and consumer education are important topics in consumption research of children and adolescents.