• 한국초전도ㆍ저온공학회논문지
• /
• 제13권3호
• /
• pp.31-35
• /
• 2011

This paper describes experimental study on GM-type pulse tube refrigerator with neon as a working fluid instead of helium. Neon gas has similar compression characteristics with helium gas because it is a monoatoimc gas. In experiments, a cooling performance test was performed with same compressor and pulse tube refrigerator for neon and helium as working gas. From experimental results, a PTR with neon show the improved cooling performance than a PTR with helium. Cooling performance and operating characteristics of a PTR were discussed and compared for two different working gas.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권3호
• /
• pp.36-41
• /
• 2011

This paper describes experimental investigation on neon refrigeration system using commercial helium compressor. In this paper, neon refrigeration cycle is calculated with assumption of ideal heat exchanger. From analysis, 32.6 K of the lowest temperature and 0.945 of quality after expansion are predicted. Cryogenic heat exchangers for pre cooler and main heat exchanger are designed and fabricated with configuration of tube-in-tube heat exchanger. In experiments, cooling performance test are performed as variation of charging pressure and orifice hole diameter. From experimental results, the lowest temperature of 44.0 K was measured with 500 ${\mu}m$ orifice and 1500 kPa of charging pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.145-149
• /
• 1997

A laser mesurement system, a modified Michelson interferometer,which can accurately measure high speed length and position of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refractive index of the ambient air was calibrated through the Edlen's formula. The system achieved a resolution of .lambda./40,16nm, a maximum allowable measurement speed of 600 mm/sec, and a length measurement range of 1500mm. Performance of the system was evaluated on the machining center in short and long length measurements

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1266-1272
• /
• 2003

This paper presents a new class of magnetic microsensors based on the Hall effect in AC microplasma. In the theoretical study, we develop a simple model of the plasma Hall sensor and express the plasma Hall voltage as a function of magnetic field, plasma discharge field, pressure, and electrode geometry. On this basis, we have designed and fabricated magnetic microsensors using AC neon plasma. In the experiment, we have measured the Hall voltage output of the plasma microsensors for varying five different conditions, including the frequency and the magnitude of magnetic field, the frequency and the magnitude of plasma discharge voltage, and the neon pressure. The fabricated magnetic microsensors show a magnetic field sensitivity of 8.87${\pm}$0.18㎷/G with 4.48% nonlinearity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.701-706
• /
• 2002

Typically, dimensions of the power circuit depend on magnetic components, heat sink, and smoothing capacitor, etc. For the miniaturization of the power circuit, one of the solutions is that bulky magnetic transformer in previously used is replaced by a piezoelectric transformer. Therefore, since many systems are attempted to apply the piezoelectric transformers, a new piezoelectric material is tending to be developed continuously. In this paper, an analysis of neon tube inverters with piezoelectric transformers are presented by Pspice modeling. Simulation results show that it is possible to apply a piezoelectric transformer to neon tube inverters with high conversion efficiency

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.128-135
• /
• 1996

This paper proposes a high precision measurement technique to obtain the height of gage block with a few millimeter height. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, in the second step, heterodyne laser interferometry is adopted to acquire the precision value. A new kind of phase detector is constructed in the low cost for the heterodyne interferometer and its linearity with ${\pm}1%$ is confirmed by experiment. Also measurement error factors due to enviroments are discussed and methodology to reduce such errors is proposed. Preliminary experiments are carried out for the gage blocks of as high as a few millimeter.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.266-268
• /
• 2003

The neon liquefier by using GM cryocooler is designed and in process of manufacturing for the cooling of 100 hp high temperature superconductor (HTS) motor. It was used the principle of thermosyphon that the rotor of the motor is cooled by the latent heat of liquidized neon. The cold-box was designed to minimize heat loss by conduction, convection, radiation. Two heat exchanger were made to liquefy neon by the direct contact of neon gas on the cold head. As a first stage of our project, evaporation apparatus will be setup in the inner field of the cold-box and then the performance of neon liquefier will be test.

• Animal Systematics, Evolution and Diversity
• /
• 제11권3호
• /
• pp.323-327
• /
• 1995

신종 Neon rostratus(부리네온깡충거미: 신칭)를 그림과 함께 기재한다. 이는 기지종 중 N. avalonus와 제일 비슷하나, 암컷의 수정낭 크기에서 쉽게 구분되며, 수컷의 경우는 교비기관의 사정관 끝부분 구조에서 기존의 모든 Neon속의 종들과 잘 구분된다, 이로서 한국산 Neon속의 거미는 2종이 된다.

• 동굴
• /
• 제79호
• /
• pp.31-39
• /
• 2007

대금굴은 3년여 동안 암석 틈새를 들춰내며 150m쯤 물길을 찾아 들어가, 다시 18m의 수직동굴로 하강하여 좁은 틈새를 비집고 70m를 들어가는 악전고투의 탐사 끝에 2003년 동굴을 발견했다. 이렇게 3년여 동안 발굴된 대금굴은 또다시 4년여 동안의 모노레일 설치와 동굴내부 관람로 및 조명설치 등의 공사를 거쳐 2097년 6월 5일 일반 공개를 하였다. 총 길이 610m 중 4분의 3정도는 동굴 입구로 향하는 산길이고 나머지는 동굴 안쪽 길이다. 승강장에서 동굴 내부 140m에 설치된 "대금역"까지는 약 7분이 걸린다. 운전석이 없고 자동으로 운행하기 때문에 앞뒤로 동굴 안팎이 잘 보인다. 동굴 내부에 열차를 타고 들어가는 건 분명 이색체험이다. 그러나 모노레일 내부에 울리는 비발디의 "사계"라든지 동굴 벽에 붙여 놓은, 네온 빛에 가까운 퍼런 빛깔의 조명이 조용한 동굴 감상에 역효과가 초래될 수도 있다.

• 전기의세계
• /
• 제9권
• /
• pp.11-17
• /
• 1962

본 연구는 냉음극방전등의 기동특성에 방사성동위원소의 이온화작용을 이용하여 기동특성의 개량을 시도하려는 것이다. 냉음극이나 열음극방전등을 막론하고 일반으로 사용되는 것은 상용전압인 저전압에서는 직접 점등이 불능하기 때문에 순시 또는 한시적인 승압장치가 필요하나. 예컨데 네온 관과 같는 냉음극방전등에서는 한시적인 승압 및 방전전류의 제한때문에 누설변압기를 사용하고 또 형광방전관 및 저압수은방전관과 같은 열음극방전관은 저전압기동을 위한 음극의 가열과 순시적인 승압장치로 점등관 및 쵸크코일등을 사용하고 있다.이와같이 방전등에서는 고전압기동으로 말미암은 승압장치 때문에 경제적 부담과 전력의 손실을 초래하고 있다. 그러기 때문에 저전압기동을 해결하는 것과 방전등의 방전개시전압의 부정으로 인한 방전개시전압의 시간적인 변동을 해결하는 것이 중요한 방전등 기동특성의 개량이다. 그리고 일반방전등에서는 그다지 문제되여 있지 않지만 방전이 늦임도 기동의 한 요소로 되어있다.