• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.346-353
• /
• 2010

This study was conducted to determine cleaning effects of environmental-friendly washing detergent on milking installation in dairy farms. Milking machine, cooling machine and milking liner were washed by alkaline detergent and acid detergent for first three weeks and alkaline detergent and environmental~friendly detergent for next three weeks and the results get through microorganism and physico-chemistry analysis at the five district dairy farms different from environment. E-coli, coliform, fecal coliform, staphylococcus aureus, fecal streptococcus, prsudomonas aeruginosa and yersinia were not found in all of the dairy farms, and total colony counts were no difference compared with chemical detergent. The water for washing exceeded the determining acceptable level of nitrate nitrogen in the Anseong, Onyang and Cheonan and the remaining substance of washed water was also high levels. The cause of the result was that the level of nitrate nitrogen of water is basically high. Therefore, this study indicated that washing effect is no differences between environmental-friendly detergent and chemical detergent by washing for milking machine and cooling machine. Above all, producing high quality milk is to manage the water quality as well as using detergent.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1001-1008
• /
• 1996

Staphylococcal food poisoning is the major cause of bacterial food poisoning occurring in this country. Therefore government regulates commercial foods through Official Dictionary of Food that there should be free of enterotoxigenic Staphylococcus aureus in Korean rice cakes, bread, and a box lunch. Since at least 5 days are required to identify the S. aureus by the official method in the Dictionary it is difficult to prevent the food poisoning and the investigation of the outbreaks. In this report an improved determination method of the S. aureus has been developed using polymerase chain reaction (PCR) technique. Sense and antisense primers for specific amplification of genes encoding staphylococcal enterotoxins were designed and synthesized for the PCR. Rapid chromosomal DNA isolation method was also developed from S. aureus using lysostaphin. The PCR condition was developed as follows. Reaction solution $(50\;{\mu}l)$ consisted of target DNA $2\;{\mu}l$ (about 20ng), 10X buffer $5\;{\mu}l$, primer 100pmole, dNTP (10 mM) $4\;{\mu}l$ and Taq DNA polymerase 2.5 unit in a thin-wall tube. Operation condition of the PCR was 5 min pre-denaturation at $94^{\circ}C$, 15 sec denaturation at $94^{\circ}C$, 15 sec annealing at $50^{\circ}C$, 20 sec extension at $72^{\circ}C$, and 5 min post-extension at $72^{\circ}C$, and 30 cycles of denaturation-annealing- extension. Using the PCR with Perkin Elmer GeneAmp PCR system 2400, types of enterotoxigenic S. aureus could be identified from Ddok or bread in a day.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.516-521
• /
• 1997

Effect of amylose content on the physical properties of resistant starches (RS) from autoclaved maize starches (with starch:water=1:3.5, at $121^{\circ}C$) which were repeated up to 4 times heating-cooling cycles, were investigated by water uptake, scanning electron microscope (SEM) and differential scanning calorimetry (DSC). Amylose content of waxy maize starch (Amioca), common maize starch (PFP), high amylose starch(Amaizo, Amylomaize VII) were 0%, 29%, 50%, and 72%, respectively. Yield of RS increased as amylose content increased. Water uptake of all kinds of native starch was higher than that of RS, but lower than that of autoclaved starch. By SEM, RS showed some small particles on surface but the size of particles was different with amylose content. Single endothermic transition peak exhibited at $40{\sim}70^{\circ}C$ in autoclaved Amioca and PFP (crystalline melting of amylopectin) and at $132{\sim}169^{\circ}C$ in autoclaved Amaizo and Amylomaize VII(crystalline melting of amylose) by DSC. RS from all kinds of autoclaved starches except Amioca showed single endothermic peak over $155^{\circ}C$ but the enthalpy was not related to amylose content.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.109-116
• /
• 2003

Based on the necessity to evaluate the activation products inventory during decommissioning lot domestic nuclear power plants, a preliminary estimation of the activation products inventory for Kori unit 1, which is getting close to the end of lifetime, was carried out with ANISN and ORIGEN2 code. In order to calculate neutron nux using ANISN code, the reactor was divided into 9 zones from core to bioshield concrete for radial direction. Also :he cross-section of main nuclides were calibrated with neutron flux in the reactor pressure vessel(RPV) region. The results showed that 95 % of tile total radioactivity in RPV from reactor shutdown to 10 years came from the nuclides of $^{55}Fe,\;^{59}Ni,\;^{63}Ni\;and\;^{60}Co$. And the total radioactivity with cooling of more than 50 years after decommissioning was no more than 0.2 % of at the time of shutdown. Considering the weight of RPV is 210 tons, the total radioactivity of RPV reached to $5.25{\times}10^{6}GBq$ at shutdown time. As compared with the total radioactivity of bioshield concrete at reactor shutdown time, the radioactivity after tooling more than 10 years was below 1 %.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2000

We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.490-500
• /
• 2004

Brown rice grains were coated by spraying aqueous protein solution extracted from rice bran using 10% ethanol, and dried at room temperature. Coating procedure was repeated 1-5 times to determine effect of repeated coating, Quality changes in coated brown rice grains were observed during 8 weeks storage. Most coated rice grains gave lower peroxide and acid values, which indicate antioxidative effects of coating. Lipase and lipoxygenase activities generally decreased in grains coated more than three times. Microscopic images of whole kernel and longitudinal section revealed cracking on all brown rice grains including control, and hydration rate constants were not significantly different among treated grains. Compared to non-coated brown rice grains, those coated more than three times, after 8 week storage, showed better quality retention observed in (meaning not clear) higher water-binding capacity, lower gel consistency decrease, less browning, and better textural properties in cooked rice, resulting in better sensory quality.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.2
• /
• pp.157-165
• /
• 2010

The age unknown Ogcheon metasedimentary rocks and the Jurassic Ogcheon granite (Jocgr) intruding it are distributed in the Ogcheon area, which is located in the central part of the Ogcheon Belt, Korea, This paper newly examines the timing of Honam shearing on the basis of the microstructural researches on time-relationship between the crenulation of Ogcheon metasedimentary rocks and the contact metamorphism by the intrusion of Jocgr. The D2 crenulation phase, which is defined by the microfolding of the S1 foliation in the metasedimentary rocks, is divided into two sub-phases. The one is a sub-phase of Early crenulation (D2a) which is included within old andalusite porphyroblasts, and the other is that of Late crenulation (D2b) which warps around the old andalusite. But they show the same dextral shear sense, the axial planes parallel to each other, and a single crenulation at outcrop scale. The contact metamorphism of andalusite-sillimanite type by the Jocgr occurred during the inter-phases of D2a and D2b, and crystallized the old andalusite masking the D2a crenulation and fibrous sillimanites replacing the D2a crenulation-forming muscovites. New andalusite porphyroblasts synkinematically grew in pressure shadows around the old andalusite or in its outermost mantles during the early stage of the D2b. The D2b occurred still continuously after the growth of the andalusite ceased (= later stage of the D2b). It indicates that the D2b occurred continuously during the period when the Ogcheon granite was still hot and cool. From this study, the crenulation history of Ogcheon metasedimentary rocks and the timing of Honam shearing would be newly established and reviewed as follows. (1) Early Honam shearing; formative period of Early crenulation, (2) main magmatic period of Jurassic granitoids; growth of the old andalusite and fibrous sillimanite by the intrusion of Jocgr, (3) main cooling period of Jurassic granitoids; formative period of Late crenulation related to Late Honam shearing, growth of the new andalusite in the early stage of D2b. Thus, this study proposes that the Honam shear movement would occur two times at least before and after the intertectonic phase which corresponds to the main magmatic period of Jurassic granitoids.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.84-92
• /
• 2022

The electro-hydrostatic actuator (EHA) recently has been used in flight control fields for aircraft because of its benefits of minimizing oil leakage and weight, improving safety, and etc. while independently operating the hydraulic power source and eliminating complex hydraulic piping. The aircraft of which EHA is installed inside, has the thermal management issue of EHA, because of its limited cooling source as compared with the aircraft which installs the traditional central hydraulic system. So, the thermal analysis model which predicts the thermal characteristics of EHA, is required to resolve this thermal management issue. In this study, an oil circulation circuit inside the hydraulic power module comprised of hydraulic pump and electrical motor for EHA was applied. This is for the purpose of developing the internal rotary group of hydraulic power module, which operates under the conditions of high rotation speed and hydraulic pressure. After formulating an appropriate thermal analysis model, the thermal analysis results with oil cooled or no oil cooled hydraulic control module were compared and reviewed, for the purpose of predicting the thermal characteristics of EHA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4762-4767
• /
• 2012

The AF track circuit that detecting train position and transmitting various train control data for DTG to the train on-board is composed of single operation system. If a failure occurs on this system, the driver should be operate the train by manually until the system is restored, because the system cannot control switch machines and signals by automatically. In this process the human error affects to the train delay, collision, derailment and critical safety accident. Therefore, this document has analyzed the effects that each failure mode influences on system and train, and quantified the failure valuation point and class. Basis on this quantified analysis result, MTBF increased and MTTR decreased and failure number also decreased by adopting the independent installation of power supply, the replacement of defected capacitors, the installation of resister cooling system and the improvement of maintenance methods. And the failure factors of AF track circuits were decreased by conducting the preventive maintenance which is a quantitative way of maintenance system by experience.

• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.120-128
• /
• 1992

Single crysals of BaTiO3 were grown by TSSG technique at various cooling rates. Morpolo girts, defects and domain structures of the grown crystals were investigated. At the cooling rates below 0.5℃/hr, equant single crystals were obtained and the 11111 faces were dominantly developed. If the cooling rate was much faster or if the vortical temperature gradient in the so lotion was very large, the solution became unstable and the needle formed BasTil04 o crystals were precipitated. Two sets of parallel lamella domains are arranged perpendicular to each other and the irregularly shaped boundaries are fixed between them. These sets of domains show remarkable orientation contrast in x-ray topography. Heating the crystal above 127℃, the phase transition from tetragonal to cubic occurs. The phase transition front (PTF) moves in the direction of temperature gradient. Domains in the tetragonal phase are successively rearranged and regular strain patterns appear in the cubic phase. The habit plane of PTF in BaTi03 is found to deviate from a l1101 lattice plane by app roximately 9°.