• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.130-131
• /
• 2003

수술용으로 쓰이는 치과용 레이저로는 Nd：YAG, $CO_2$, Er：YAG 레이저들이 있다. 치료 부위에 따라 두 가지 응용으로 나눌 수 있다. 잇몸의 절개 등은 주로 $CO_2$나 Nd：YAG 레이저를 이용하여 정밀하게 그리고 출혈을 최소로 하는 레이저의 장점을 살리면서 시술하고 있다. $CO_2$레이저의 경우 강한 열적 손상작용 때문에 출력 조사 시간을 짧게 하여 사용하며, 열적 손상력이 낮은 Nd：YAG 레이저는 화이버를 접촉식으로 하여 화이버의 작은 면적의 높은 광밀도를 이용하여 시술하고 있다. (중략)

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2298-2303
• /
• 2008

The increasing demands for the recently released CPU which has had higher heat density, the confined space of desktop PCs, and so on are the main drive for continuously improving PC cooling systems. In order to meet number of demands, this paper describes the flow and thermal behavior of the heat sink combined with heat pipes, and a fan through the numerical analysis by using the computational fluid dynamics(CFD) code and discusses how to extend the cooling capability.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.627-630
• /
• 2003

This work presents a numerical procedure to optimize the shape of three-dimensional channel with angled ribs mounted on one of the walls to enhance turbulent heat transfer. The response surface method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of flow and heat transfer. SST turbulence model is used as a turbulence closure. The width-to-height ratio of the rib, rib height-to-channel height ratio, pitch-to-rib height ratio and attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related terms with weighting factor. D-optimal experimental design method is used to determine the data points. Optimum shapes of the channel have been obtained for the weighting factors in the range from 0.0 to 1.0.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.343-345
• /
• 2018

전력 발전사들은 해안을 중심으로 운영되고 있는데, 이는 발전하는 과정에서 회전기기 터빈과 발전기 열을 냉각시키기 위해 해수를 사용한 후, 발생한 온배수는 해안으로 방출되고 있다. 양식장에는 수온 관리를 하는데 큰 비용이 발생하기 때문에 수열에너지를 공급하는데는 경제적으로 매우 중요하다. 따라서 효율적인 스마트 양식장을 운용하기 위해서는 발전소에서 폐수로 방출되는 온배수 에너지원을 재생에너지로 활용하여 이 열을 저장하고 양식수조에 공급하는 온배수 히트펌프의 수온 제어시스템과 양식수조의 최적화 설계를 위하여 새로운 형태의 육상수조 양식구조와 수질과 수온을 제어하는 IoT(Internet of Things)기반의 스마트 양식장이 필요하다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1629-1636
• /
• 2004

The continuous casting is primarily a heat-extraction process in which the heat transfer at various cooling zones profoundly influences quality of products. So development of numerical model is necessarily needed for more specific and clear investigations upon heat transfer mechanism at mold and secondary cooling zones. In this study, heat transfer coefficients which show the characteristic of heat transfer mechanism in mold are calculated for more exact analysis with temperature measured in bloom mold using optimal algorithm, and finally the validity of cooling conditions at secondary cooling zone actually used at field fur 30 Ton bloom type continuous casting of 0.187%C is investigated. From the results of solidification analysis, the characteristic of bloom mold shows a similar tendency with that of previous studies, and optimized cooling conditions for 0.187%C are presented.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.341-342
• /
• 2023

배터리 기술 고도화 및 기술표준 강화에 따라 완성차 제조사와 배터리 업계간 활발한 협업이이어질 전망이다. 또한 기존 배터리 제조사들이 활발한 증설 및 밸류 체인 확장을 통한 기술가격 경쟁력 격차 유지에 적극적으로 나서고 있어, 향후 시장 주도권 경쟁이 가속화될 것으로 전망된다. 배터리의 온도 상승은 배터리 효율을 낮추는 원인이며, 배터리 온도 제어가 전기자동차 차량의 전체 성능 향상에 중요한 부분이라고 할 수 있다. 본 연구는 실제 Battery Pack 실험 전 열유동해석을 통해 배터리온도 상승추이 및 냉각효율 검증을 진행하는 과정에서 발생하는 과도한 시간 소요를 줄이기 위해 Machine Learning 을 활용하여 검증 효율 및 설계 효율을 높이는데 그 목적이 있으며, CFD를 활용한 배터리 효율 최적화 설계를 하는 기존 모델 대비 30%~50%정도의 성능향상을 예측할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.651-657
• /
• 2010

A composite piston with a crown made of steel and a skirt made of NCI is used in a marine diesel engine, which has a maximum firing pressure of over 180 bar and a high thermal load. In the fatigue design of the composite piston, the fatigue is influenced by factors such as the load type, surface roughness, and temperature; further, the distribution ratio of the firing force from the crown to the skirt is important for optimizing the design of the crown and skirt. In this study, the stress gradient method was used to consider the effect of the load type. The temperature field on the piston was predicted by cocktail-shaking cooling analysis, and influence of high temperature on fatigue strength was investigated. The load transfer ratio and contact pressure were optimized by design of the surface shape and accurate tolerance analysis. Finally, the cooling performance and durability design of the composite piston were verified by performing a long-term prototype test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1051-1057
• /
• 2011

By the recently developed GMP(Glass Molding Press) process, aspheric glass lenses are widely used in many optical applications such as digital cameras, optical data storages and electrical devices etc. The GMP process can economically produce complex shaped glass lenses with high precision and good repeatability. This study deals the optimization of molding conditions for aspheric glass lenses in progressive GMP process through Design Of Experiment(Taguchi method). Tree main factors for molding conditions were selected based on pressure, temperature and cooling time at 1st cooling stage. From the analysis of experiments which were preformed with 3-cavity glass mold, it was revealed that the cooling time was the most sensitive parameter for form accuracy(PV) in progressive GMP process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1773-1785
• /
• 1997

The cooling stage is the very critical and most time consuming stage of the injection molding process, thus it cleary affects both the productivity and the part quality. Even through there are several commercialized package programs available in the injection molding industry to analyze the cooling performance of the injection molding coling stage, optimization of the cooling system has npt yet been accomplished in the literature due to the difficulty in the sensitivity analysis. However, it would be greatly desirable for the mold cooling system designers to have a computer aided design system for the cooling stage. With this in mind, the present study has successfully developed an interated computer aided design system for the injection molding cooling system. The CAD system utilizes the sensitivity analysis via a Boundary Element Method, which we recently developed, and the well-known CONMIN alforuthm as an optimization technique to minimize a weighted combination (objective function) of the temperature non-uniformity over the part surface and the cooling time related to the productivity with side constranits for the design reality. In the proposed objective function , the weighting parameter between the temperature non-uniiformity abd the cooling time can be adjusted according to user's interest. In this cooling system optimization, various design variable are considered as follows : (i) (design variables related to processing conditions) inlet coolant bulk temperature and volumetric flow rate of each cooling channel, and (ii) (design variables related to mold cooling system design) radius and location of each cooling channel. For this optimum design problem, three different radius and location of each cooling channel. For this optimum design problem, three different strategies are suffested based upon the nature of design variables. Three sample problems were successfully solved to demonstrated the efficiency and the usefulness of the CAD system.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.85-92
• /
• 2016

Since the power density of the VHTR(Very High Temperature Reactor) is lower, there is less possibility of core melt. VHTR has no risk of explosion caused by hydrogen generation when the loss of coolant accident occurs, which is another advantage. Along with safety benefit, it can be used as a process heat supplier near demand facilities because coolant temperature is very high enough to be used for industrial purpose. In this paper, we designed the primary system using VHTR and the secondary system providing electricity and process heat. Based on that 350 MW thermal reactor proposed by NGNP(Next Generation Nuclear Part), we developed conceptual model that the IHX(Intermediate Heat Exchanger) loop transports 300 MW thermal energy to the secondary system. In addition, we analyzed thermodynamic behavior and performed the efficiency analysis and optimization study depending on major parameters.