• Journal of Chest Surgery
• /
• 제38권1호
• /
• pp.29-37
• /
• 2005

저자득은 최근 논의되고 있는 정상체온 체외순환의 임상적 유용성과 생리학적 영향을 규명하기 위해 저체온 체외순환과의 비교 연구를 시행하게 되었다. 대상 및 방법: 심장수술이 계획된 36명의 성인 환자들을 연구목적에 따라 무작위로 중등도 저 체온 체외순환군(이하 저체온군, 비인두 온도$26\~28^{\circ}C,\;n=18)$과 정상체온 체외순환군(이하 정상체온군, 비인두 온도>,$35.5^{\circ}C,\;n=18)$으로 나누었다. 전체 환자들로부터 체외순환 전, 체외순환 중, 체외순환 종료 직후에 각각 혈액을 채취하여 총 백혈구 수, neuron-specific enolase 증가율(NSE), interleukin-6 증가율(IL-6), endothelin-1 (ET-1), cortisol 증가율, troponin I (TNI), aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, blood urea nitrogen (BUN)을 측정하였다. 그 외 수술 중 소변 배출량, 수술 후 페지수$(PaO_{2}/FiO_{2}),$ 기계호흡 보조시간, 중환자실 치료기간, 합병증, 재원일수 등을 조사하여 양 군 간에 비교 평가하였다 결과: 정상체온군이 저체온군에 비해 심장수술 동안 총 백혈구 수, NSE 증가율, IL-6 증가율, cortisol 증가율은 유의하게 더 높았으나 소변 배출량은 더 낮았다. 또한 기계 호흡 보조 시간, 중환자실 치료기간, 재원일수 역시 정상체온군이 저체온군보다 유의하게 더 길었다. 결론: 저자들의 연구 결과를 볼 때 정질 냉각 심정지액을 이용한 심장 수술 동안 정상체온 체외순환은 중등도저체온 체외순환보다 더 높은 염증 및 스트레스 반응을 유도하여 생리학적으로 유해할 것으로 생각된다. 그러나 좀더 많은 환자 수를 대상으로 한 추가적 연구가 필요할 것으로 판단된다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.499-505
• /
• 2010

본 연구에서는 두 개의 기포유동층으로 구성된 연속장치(높이: 1.2 m, 내경: 0.11 m)를 이용하여 실험장치의 최소유동화속도와 고체순환량을 측정하여 수력학적 특성을 파악하고 흡수-재생 조업변수에 의한 반응특성을 알아보았다. 사용된 K-계열 건식흡수제는 한국전력연구원으로부터 공급되었고 $CO_2$ 흡수를 위한 35%의 탄산칼륨과 기계적 강도를 위한 65%의 지지체로 구성되어 있다. 연속 장치는 두 개의 기포유동층 반응기, 수송관, 상승관, 냉각장치, 분석기, 히터 등으로 구성되어 있다. 이 장치의 최소유동화속도는 0.0088 m/s이고 수송관의 유속이 1.05 m/s일 때 고체순환량은 $10.3kg/m^2{\cdot}s$로 측정되었다. 모사가스를 이용하여 실험을 수행하였고 흡수반응기 입구 $CO_2$ 농도(Dry basis)는 약 10 vol%였고, 온도는 흡수반응온도 $70^{\circ}C$, 재생반응온도 $200^{\circ}C$에서 각각 일정하게 유지하였다. 반응기의 차압은 흡수반응기 $415mmH_2O$, 재생반응기 $350mmH_2O$에서 안정적으로 유지하였다. 실험은 조업변수들인 $H_2O$ 주입농도(7.28~19.66%), 모사가스 유속(0.053~0.103 m/s), 흡수반응온도($60{\sim}80^{\circ}C$), 재생반응온도($150{\sim}200^{\circ}C$), 고체순환량($7.0{\sim}10.3kg/m^2{\cdot}s$)의 변화에 따라 반응실험이 실시되었다. 각 변수실험은 정상상태 도달 후 1시간 정도 유지한 후 결과를 저장, 분석하였다. 실험결과 수증기 주입량, 재생반응온도, 고체순환량이 증가할수록 제거율은 증가하였고 흡수반응온도, 유속이 증가함에 따라 제거율은 감소하였다.

• 농업과학연구
• /
• 제13권2호
• /
• pp.265-278
• /
• 1986

동력경운기(動力耕耘機) 탑재용(塔載用) 6kW 수냉식(水冷式) 디젤기관(機關)의 성능향상(性能向上)을 도모(圖謀)하기 위(爲)하여 현존(現存)의 냉각장치(冷却裝置)는 그대로 이용(利用)하고 냉각수(冷却水) 용량(容量)만을 2700cc에서 2800cc, 2900cc, 3000cc, 3100cc 로 4수준(水準)으로 변화(變化)시키면서 기관(機關)의 출력(出力), 연료소비율(燃料消費率), Torque, 냉각수(冷却水) 및 윤활유(潤滑油)의 온도(溫度)와 기관(機關)의 마찰손실(摩擦損失)을 D.C. dynamometer를 이용(利用)하여 측정(測定)한 결과(結果)는 다음과 같은 결론(結論)을 얻었다. 1. 공시기관(供試機關)의 출력성능(出力性能)은 한국공업표준규격범위(韓國工業標準規格範圍)에는 들었으나 정격표시마력(定格表示馬力)이 실험결과(實驗結果)보다 약(約) 10% 정도(程度) 낮게 표기(表記)되어 있으며 연료소비율(燃料消費率)은 297.78g/kW-h 로 약간(若干) 높은 수준(水準)이었으며 냉각수(冷却水) 온도(溫度)는 $101^{\circ}C$로 SAE기준(基準)인 $88^{\circ}C$보다는 $13^{\circ}C$ 정도(程度)가 높았다. 2. 공시기(供試機)의 마찰손실(摩擦損失)은 정격상용회전(定格常用回轉)인 2200rpm에서 3.65kW 이었으며 기보고(旣報告)된 측정치(測定値)보다 약간(若干) 높은 범위(範圍)이었다. 3. 냉각수(冷却水) 용량(容量)을 2700cc에서 3100cc로 14.8% 증가(增加)시켰을 때 출력(出力)은 6.7kW에서 7.13kW로 0.43kW의 6.3%가 증가(增加)하였다. Torque도 냉각수(冷却水) 용량(容量) 2700cc일 때 28.85N.m에서 3100cc일 때 30.706N.m로 6.39%가 증가(增加)하는 경향(傾向)을 보였다. 4. 냉각수(冷却水) 용량(容量) 2700cc에서 3100cc로 증가(增加)시켰을 때 연료소비율(燃料消費率)은 310.85g/kW-h에서 304.14g/kW-h로 6.69g/kW-h가 감소(減少)하였으며 30분간(分間) 전하중운전시(全荷重運轉時) 냉각수(冷却水)의 온도(溫度)는 냉각수(冷却水) 용량(容量)이 2700cc에서 $101^{\circ}C$였고 냉각수(冷却水) 용량(容量)이 3100cc에서 $88^{\circ}C$로 $13^{\circ}C$가 감소하여 3100cc일 때는 SAE 표준(標準)과 같았고 윤활유(潤滑油) 온도(溫度)는 냉각수(冷却水) 용량(容量)이 2700cc일 때, $76.7^{\circ}C$였으며 냉각수(冷却水) 용량(容量)이 3100cc에서는 $70.4^{\circ}C$로 $6.4^{\circ}C$가 감소하였다. 5. 기계효율(機械效率)은 냉각수(冷却水) 용량(容量)이 2700cc에서 70.08%였고 냉각수(冷却水) 용량(容量)이 3100cc일 때는 71.08%로 0.95%가 증가(增加)하였다.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.