• The Monthly Technology and Standards
• /
• s.20
• /
• pp.60-67
• /
• 2003

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.325-335
• /
• 2016

To predict service life of coating systems registered in Korean specifications for steel bridge coatings, field deterioration evaluation and accelerated weatherproof test were carried out, and deterioration models were drawn through regression analysis for evaluation results. For the coating systems that have not been used in field, regression analyses were carried out for the virtual evaluation results drawn by applying coordination factor to the field evaluation results for chlorinated rubber and urethane topcoat system. Service life prediction results showed that application of thermal sprayed coating (TSC) could extend service life of coatings to more than twice of general coatings.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.30-37
• /
• 2002

This paper reports on the results of weathering test, tracking test and salt-fog test of various kinds of cycloaliphatic epoxy systems. UV irradiation dramatically induced the loss of surface hydrophobicity due to the chain scission attack at the surface under UV irradiation. It could be seen that samples containing an UV absorbent/antioxidant and a silicone oil additive have a good performance in weathering test, while ATH(alumina tri-hydrate) filled ones have high resistance against tracking failure than others. Under salt fog chamber test, specimens mixed with silicone oil are able to suppress leakage current development. It was thought that silicone oil mixed into cycloaliphatic epoxy system could lead to lower the surface energy and to retain hydrophobic properties for a long time, which are desirable for outdoor use.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.177-185
• /
• 2000

An experimental research to evaluate the slip coefficients of high-strength friction-type bolt connection of weathering steel plate has been performed in this paper. The test specimens with mill scale or shot blast had been exposed in open air during 3 and 6 months and cleaning of rust surface by hand brushing, power tool brushing and no cleaning was considered. The relaxation of bolt clamping force had also been measured during 600 hours. It was found that slip coefficients increased to the value over 0.6 with exposure except mill scale surface by power tool brushing. The relaxation of bolt tension force in exposed specimens also increased and maximum value reached to about 10%.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.349-358
• /
• 2001

Silyl group-containing acrylic resins were synthesized to prepare weather resistant coatings. Acrylic copolymer was synthesized by the addition copolymerization of n-butyl methacrylate, methyl methacrylate, n-butyl acrylate and 3-methacryloxypropyl trimethoxysilane (MPTS). Acrylic copolymer were synthesized such that their $T_g$'s were adjusted to $20^{\circ}C$ and their MPTS contents were varied to 10, 20 and 30 wt%. As the content of MPTS increased, viscosity of coatings increased and thermal stability at the high temperature was improved. Coatings was prepared by blending the synthesized resins with a white pigment. The adhesion performance of coatings was superior with various substrates and their other properties were on the whole suitable. Weatherability was tested by outdoor exposure test, WOM test and QUV test. It was proved that resin with 30 wt% MPTS was suitable as the binder for weather resistant coatings.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.66-74
• /
• 2000

Wood of black locust(Robinia pseudoacacia) and bark of poplar(Populus alba x glandulosa), ash(Fraxinus rhynchophylla) and elm(Ulmus davidiana var. japonica) trees were collected, extracted with acetone-$H_2O$(7:3. v/v), fractionated with hexane, chloroform, ethylacetate and $H_2O$. then freeze dried to get some dark brown powder for bioactive tests. Decay-resistant activity was tested using wood block specimens from the hardwood trees and expressed by weight loss rate. Black locust specimens indicated the best anti-decaying property and poplar blocks were the worst. Antimicrobial and antioxidant activities were also investigated against each wood or bark extractives. Antifungal and antibacterial activities did not indicate any significant differences among the tested fractions. In antioxidant activity. ${\alpha}$-tocopherol one of natural antioxidants. and BHT, one of synthetic antioxidants, were used as references to compare with the antioxidant activities of the extracted fractions. Ethylacetate fraction of ash bark indicated the highest activity besides BHT in this test and all fractions of black locust extractives also indicated higher activities compared with the other fractions.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.312-313
• /
• 2012

단청의 열화현상에 대한 연구는 주로 건축재로서의 내구성 향상에 초점을 두고 연구가 진행되고 있으나 본 연구는 가상유적지 재현을 위해 가상 건축물의 사실감을 높이기 위한 방안으로서 열화현상을 분석하고 가시화 하는데 초점을 두었다. 이를 위해 먼저, 전통건축에 나타나는 단청의 열화과정을 인간이 인지하는 색채감의 변화에 초점을 두고 연구를 진행한다. 우리나라 단청에서 사용된 안료를 살펴보고 문화재관리청에서 선정한 무기안료와 유기안료를 중심으로 내후성 시험을 통해 안료의 열화현상을 분석한다. 단청의 열화를 크게 색변과 박리 현상으로 나누어 촉진내후성시험기를 통해 얻어진 결과를 토대로 목조 전통건축의 열화현상을 분석한다.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.567-571
• /
• 2012

The discoloration of traditional paintings could be induced by various chemical reactions of inorganic pigments due to temperature, humidity, light and air pollution. In this study, we made artificial samples including azurite and malachite as inorganic pigments using the traditional method on hanji called 'Korean paper'and investigated the artificial aging process occurred by the interaction between pigments and environmental factors. It was found that the azurite was influenced by the humidity of weathering tests and the salt fog of salt spray tests according to XRD and TGA results. However, it was shown that the malachite was chemically changed by the ultraviolet radiation of weathering tests and UV radiation tests according to color difference and TGA results.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.418-422
• /
• 2001

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2391-2400
• /
• 2015

Weather proof steels are used for steel bridges due to its high corrosion resistance under atmospheric conditions. However, instead of forming stabilized rust layers, general rust occurs on weather proof steels under high humidity condition close to seawater or shady places. In Japan, therefore, they perform rust stabilization treatment instead of unpainted treatment due to severe atmospheric conditions. However, most of domestic weather proof steels were constructed unpainted in the form of closed box-girder, which makes the periodical repetition of dry and wet hard to occur. For the steel bridges constructed on the Han river, the evaporation of water, dew condensation due to temperature change, and stagnant water due to rain affect harmfully on the formation of passive film on weather proof steels. Thus, in this research, in order to analyze corrosion properties inside the closed box-girder for the unpainted weather proof steel bridge in the waterworks safety zone, multiple ways of analysis such as observation with eyes, cellophane-tape test, steel thickness measurement, surface corrosion potential measurement, electron microscope analysis, and X-ray diffraction analysis of the rust were performed. As a result, unstable rust layer was observed inside the closed box-girder, and severe corrosion was observed on the top and bottom of the flanges due to the effects of stagnant water caused by rain, dew condensation, and de-icing materials.