• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.97-108
• /
• 2016

Thermally sprayed metals or organic coatings is often used in corrosion protection of steel structures. Duplex coating systems of thermally sprayed metal in combination with organic coating are selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, three types of corrosion tests were carried out on four types of thermal sprayed specimens with sealing: zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, four types of duplex coated specimens; thermally sprayed metals in combination with paint of acrylic urethane, and painted specimens. NORSOK M-501, Wet/dry cyclic seawater tests and outdoor exposure tests of nine types of specimens were conducted. From the corrosion test results, weathering performance of them were presented.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1547-1549
• /
• 2003

송배전용 설비에 사용되는 옥외 절연물로는 자기질이나 유리질의 애자가 주로 사용되어 왔지만 최근 신소재의 발달로 가볍고 절연성능이 우수한 폴리머 애자가 보편화되기 시작하였다. 폴리머 애자가 자기질 및 유리질의 애자에 비하여 내열성과 내후성이 부족한 것은 사실이지만 절연물이 오염과 습윤된 환경에서 폴리머 애자의 절연성능이 휠씬 우수한 것으로 밝혀지고 있다. 폴리머 애자의 장기성능 예측을 위하여 많은 수단과 측정방법이 연구되어 왔다. 폴리머 애자의 하우징 재료는 내열성, 내후성, 산화안정성, 발수성 및 내오염성 등 절연소재로서 우수한 특성을 가지고 있지만 하우징 표면에서의 방전이 발생될 때 옥외절연물에서의 성능은 하우징 재료의 배합처방에 따라서 많은 차이가 나고 있다. 본 논문에서는 하우징용 소재의 특성을 평가하기 위한 평가방법과 평가결과를 해석하는 기술에 대하여 기술하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.366-367
• /
• 2003

토목합성재료의 내후성은 사용되는 원료 물질, 기후조건, 하중조건, 노출 기간 등에 따라 상이한 결과를 나타내며, 이러한 영향인자에 대한 많은 연구가 국내외적으로 이루어졌으나 이는 각 적용지역의 환경조건을 고려하여 실시된 경우로 지역적인 조건과 기후 차이로 국내 여건에 적합한 데이터라 할 수 없다. 본 연구에서는 임시구조물로 적용된 분리형 보강토 옹벽의 전면체를 형성하는 부직포 지오텍 스타일에 대해 현장 적용 노출시험을 실시하였으며 약 1년 간의 지속적인 계측을 통해 실제 국내 현장에서 나타나는 부직포 지오텍스타일의 내후성 거동에 대해서 평가하였다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.30-37
• /
• 2002

This paper reports on the results of weathering test, tracking test and salt-fog test of various kinds of cycloaliphatic epoxy systems. UV irradiation dramatically induced the loss of surface hydrophobicity due to the chain scission attack at the surface under UV irradiation. It could be seen that samples containing an UV absorbent/antioxidant and a silicone oil additive have a good performance in weathering test, while ATH(alumina tri-hydrate) filled ones have high resistance against tracking failure than others. Under salt fog chamber test, specimens mixed with silicone oil are able to suppress leakage current development. It was thought that silicone oil mixed into cycloaliphatic epoxy system could lead to lower the surface energy and to retain hydrophobic properties for a long time, which are desirable for outdoor use.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.776-784
• /
• 2016

In this study, green Larix kaempferi lumber was heat-treated by using superheated steam (SHS) at a pilot scale and then various physico-mechanical properties of the heat-treated wood were evaluated and compared with the properties of conventional hot air (HA) heat-treated wood. Decay resistance of brown rot fungi and compressive strength parallel to the grain of the SHS heat-treated wood without occurrence of drying check from green lumber were increased. On the other hand, density, equilibrium moisture content, shrinkage, and bending strength of the SHS heat-treated wood were lower than those of the conventional HA heat-treated wood. Because heat transfer and thermal hydrolysis of SHS heat treatment was accelerated by a large amount of water, the effect of SHS heat treatment on the physico-mechanical properties was higher than that of HA heat treatment at the similar conditions of temperature and time. From the results of this study, because green lumber can be heat-treated without occurrence of cracks or checks by using SHS and similar heat treatment effect on the physico-mechanical properties of wood can be produced despite a low temperature or short time of heat treatment, it is expected that heat time and energy consumption could be reduced by using SHS.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2013

This study aims to investigate the film performance by physical properties of glue and gelatin in traditional paint(Dancheong). To do this, homemade, commercial glue and gelatin was selected and evaluated water reaction and weatherproof. The result, the highest gel strength, gelatin was better than acrylic acid ester resin, when compared with hygroscopic property and adhesive property. And that was better than in any others, when compared with water-proofing.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.559-565
• /
• 2013

This study evaluated the ability of white and brown rot fungi to decompose fire retardant-treated wood by measuring mass loss. Anti efficacy of FRT against sapstain and mold fungi was evaluated. Wood was treated with liquid sodium silicate and boric acid, ammonium borate, di-ammonium phosphate. Retardant treated wood was then subjected to fungal decay resistance tests performed according to KS standard method using a brown-rot fungus, Fomitopsis palustris and white rot fungus Trametes versicolor. Aspergillus niger, Penicillium funiculosum, Rhizopus nigricans, Aureobasidium pullulans, Tricoderma virede fungi were used anti-sapstain and mold test. Boron and phosphorus chemicals used in this study increased the resistance of fire retardant treated wood against both fungal attack. Anti mold and sapstain efficacy of the fire retardant treated wood was excellent but there were difference depend on mold. After the liquid sodium silicate treatment, the second chemical treatment process could lead chemical fixation into wood, which effects decay resistance.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.344-347
• /
• 2012

본 논문에서는 적외선 반사기능을 가지는 황색, 흑색안료를 PVDF, 첨가제와 배합하여 링밀에서 3,000rpm으로 10분간 분산한 후 세라믹 결정구조의 차열도료를 제조하였으며, 도막형성 후 $180^{\circ}C$에서 10분간 건조하여 도료에 대한 표면온도, 내후성(Q.U.V), 적외선 반사율(%)을 평가하였다. 연구결과 황색안료 9%를 첨가하여 $150{\mu}m$ 두께의 도막을 형성시켰을 때, 일반도료와의 표면온도 차이는 $10.1^{\circ}C$, 700~2,500nm 파장대의 적외선 반사율은 40% 이었으며, 흑색안료 9%를 첨가하여 $200{\mu}m$ 두께의 도막을 형성시켰을 때, 표면온도차 $18.8^{\circ}C$, 적외선 반사율 66.7%로 측정되었고, 내후성은 모두 우수하게 나타났다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.141-146
• /
• 2001

송전전압의 대용량화에 따라 옥외용 절연재료 특히, 애자는 porcelain에서 소형화가 가능한 고분자 소재로 전환되고 있다. 이러한 고분자 소재는 소형화, 경량화뿐만 아니라 저가, 가공의 용이성, 우수한 절연성능을 가지지만, 옥외용 절연재료인 애자로서 갖춰야 할 내후성, 내산화성 등은 porcelain insulator에 비해 낙후된 상태이다. 하지만 애자 중 실리콘 고무는 비교적 내광성, 내열성, 산화안정성, 내후성 등이 우수한 특성을 나타내나 EPDM(ethylene propylene diene monomer)에 비해 가격이 비싸며 낮은 인열강도를 나타내는 등의 단점을 가지고 있다. 그리고 애자는 염분이나 열 등에 의해서 표면방전과 섬락을 일으켜 절연파괴를 일으키지만, 그것이 계속 반복열화함에 따라서는 기계적 강도가 급격히 저하함으로 적절한 평가가 요구된다.(중략)