• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.766-773
• /
• 2021

Chemicals, such as ammunition, are disposable items that cannot be reused because of their operational characteristics. The reliability of the test process and test results are important factors in evaluating the performance of guns and ammunition. The pressure after firing is a crucial value in an acceptance test of guns and ammunition performance; hence, accurate measurements are required. The pressure in the artillery is measured using the copper crusher gauge. The compression amount of copper is converted into a pressure by either a length-pressure conversion table or conversion formula. Therefore, the exact measurement of the squeeze of the copper crusher is related directly to the correct estimate of the pressure. Currently, the pressure is measured manually by the operator, which always includes some human error. In this study, the cause of the measurement error was analyzed, and the automatic measuring system for copper crusher deformation was developed to minimize the error elements. A copper crusher could be measured using the probe sensor and CCD camera, and the Jig for stable positioning was also designed. A designated SW was also developed for the system operating and measurement-analysis. This measuring system through this study may be used for an ammunition stockpile reliability test and gun/ammunition acceptance test.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.339-345
• /
• 2009

The graft copolymerization of acrylonitrile-EPDM-styrene (AES) was investigated under various reaction conditions such as the concentration of initiator, the content of diene and viscosity of EPDM, and the concentration of solvents. The conversion increased but the molecular weight and the rubber particle size decreased with the concentration of initiator. The graft ratio(GR) increased at low concentrations of the initiator but, after the maximum value, it gradually decreased with the concentration of initiator. Toluene as a single solvent gave the highest conversion and the mixture of ethyl benzene and toluene was better than toluene. The rubber particle size increased with the viscosity of EPDM and the graft ratio and the number of rubber particles with occluded SANs increased with the content of diene.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.287-297
• /
• 2012

In order to prepare for the introduction of the E-Discovery system from the United States and to cope with some causable changes of legal systems, we propose a general E-Discovery process and essential tasks of the each phase. The proposed process model is designed by the analysis of well-known projects such as EDRM, The Sedona Conference, which are advanced research for the standardization of E-Discovery task procedures and for the supply of guidelines to hands-on workers. In addition, Machine Learning Algorithms, Open-source libraries for the Information Retrieval and Distributed Processing technologies based on the Hadoop for big data are introduced and its application methods on the E-Discovery work scenario are proposed. All this information will be useful to vendors or people willing to develop the E-Discovery service solution. Also, it is very helpful to company owners willing to rebuild their business process and it enables people who are about to face a major lawsuit to handle a situation effectively.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.4
• /
• pp.77-82
• /
• 2020

Wireless sensor networks (WSNs) suffer from not only a short lifetime due to limited energy but also an energy imbalance between nodes close to the sink and others. In order to fundamentally solve the short lifetime, recent studies utilize the environmental energy such as solar power. Additionally, WSNs using mobile sinks are being studied to address the energy imbalance problem. This paper proposes an improved CTP (Collection Tree Protocol) scheme which uses these two approaches simultaneously. Basically, it is based on a CTP scheme which is a very popular data collection strategy designed for the typical battery-based WSNs with a fixed sink. Therefore, we tailored it for solar-powered WSNs with a mobile sink. Performance verification confirms that our scheme reduces the number of blackout nodes significantly compared to the typical CTP, thus increases the amount of data collected by the sink.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.281-289
• /
• 2000

While acquiring images, the relative motion between the imaging device and the object scene seriously damages the image quality. This phenomenon is called motion blur. The peak-trace approach, which is our recent previous work, identifies important parameters to characterize the point spread function (PSF) of the blur, given only the blurred image itself. With the peak-trace approach the direction of the motion blur can be extracted regardless of the noise corruption and does not need much Processing time. In this paper stochastic peak-trace approaches are introduced. The erroneous data can be selected through the ML classification, and can be made small through weighting. Therefore the distortion of the direction in the low frequency region can be prevented. Using the linear prediction method, the irregular data are prohibited from being selected as the peak point. The detection of the second peak using the proposed moving average least mean (MALM) method is used in the Identification of the motion extent. The MALM method itself includes a noise removal process, so it is possible to extract the parameters even an environment of heavy noise. In the experiment, we could efficiently restore the degraded image using the information obtained by the proposed algorithm.

• 한국해양학회지
• /
• v.26 no.4
• /
• pp.295-303
• /
• 1991

Multi-spectral analyses of excitation and emission fluorescence was applied to spilled crude oils in characterization of their specific fluorescence patterns which is called oil fingerprints. In the present study, oil fingerprints of 33 crude, 4 fuel and 2 other oils were analyzed to establish data base library search system. Cluster analysis showed that crude oils could be classified into two large groups according to their fluorescence characteristics. In simulated experiments, all the spilled sources was identifiable by the present library search system. In the natural environment this system could identify the exact source of weathered crude oil slicks upton 10 days. The present study shows that the fluorescence fingerprinting method with the library search system is reliable and superior to toutine GC/HPLC analyses in identification of the source of weathered spilled oils in the marine environment.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.7-15
• /
• 2006

A large sample can Provide more information about the Population. As the sample size Increases, analysts will be more confident about the survey results. On the other hand, the costs for survey will increase in time and manpower. Therefore, determination of the sample size is a trade-off between the required accuracy and the cost. In addition, permitted error and significance level should be considered. Sample size determination in surveys for O/D estimation is also connected with confidence of survey result. However, the past methods were usually too simple to consider confidence. Therefore, a new method for O/D surveys was Proposed and it was accurate enough, but it has too large sample size when we have current budget constraint. In this research, several minimum sample size determination methods for origin-destination survey under budget constraint were proposed. Each method decreased sample size, but has its own advantages. Selection of the sample size will depend on the study Purpose and budget constraint.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.337-344
• /
• 2007

In recent years, there has been rapid progress in different areas of vision science, such as refractive surgical procedures, contact lenses and spectacles, and near vision. This progress requires a highly accurate modeling of optical performance of the human eyes in different accommodation states. A new novel model-eye was designed using the Navarro accommodation-dependent finite model eye. For each of the vergence distances, ocular wavefront error, accommodative response, and visual acuity were calculated. Using the new model eye ocular wavefront error, accommodation dative response, and visual acuity are calculated for six vergence stimuli, -0.17D, 1D, 2D, 3D, 4D and -5D. Also, $3^{rd}\;and\;4^{th}$ order aberrations, modulation transfer function, and visual acuity of the accommodation-dependent model eye were analyzed. These results are well-matched to anatomical, biometric, and optical realities. Our corrected accommodation-dependent model-eye may provide a more accurate way to evaluate optical transfer functions and optical performances of the human eye.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.1-13
• /
• 2009

The monetary model suggests that nominal exchange rates between two countries will be determined by important macroeconomic variables. The existence of a cointegrating relationship among these fundamental variables is the backbone of the monetary model. In a recent paper, Rapach and Wohar (2002, Journal of International Economics) advance the literature by testing for linear cointegration in the monetary model using a century of data to increase power. They find evidence of cointegration in five or six of ten countries. We extend their work to the nonlinear framework by performing threshold cointegration tests that allow for asymmetric adjustments in two regimes. Asymmetric adjustments in exchange rates can occur, for example, if transactions costs are present or if policy makers react asymmetrically to changing fundamentals. Moreover, whereas Rapach and Wohar (2002) found it necessary to exclude the relative output variable in some cases to maintain the validity of their cointegration tests, we can include this variable as a stationary covariate to increase power. Overall, using their same long-span data, we find more support for cointegration in a nonlinear framework.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.54-62
• /
• 1990

The thermodiluton is a standard method to measure cardiac output in clinical medicine. However it has many disadvantages such as expensive instrument and measurement, limited number of measurement, pain, safety problem, and side-effect due to insertion of catheter into heart. Electrical Impedance Cardiography has no such disadvantages and that it can continuously monitor stroke volume, contractility of cardiac muscle, and systolic time interval (STI) as well as cardiac output. While this impedance technique has been widely used and vigorously studied adroad, it is not introduced yet in Korea. Thus an Impedance Cardiograph has been developed in order to introduce this new technique. Its accuracy also has been verified by simultaneous measurement of cardiac output with the thermodilution technique. Finally changes of cardiac function during exercise were also measured.