• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.86-95
• /
• 2019

Recently, the applications of carbon fiber have been broader than ever when it comes to such industrials as automobiles, ships, aerospace, civil engineering and architecture because of their lightweight-ness and high mechanical properties. This study analyzed mechanical properties and flexural behavior of carbon fiber reinforced cement composites(CFRC) with different fiber contents and fiber lengths, and also impact resistance by natural drop test on mortar specimens was compared and examined. In addition, contents of carbon fiber(CF) were varied by 0.5%, 1.0%, 2.0% and 3.0%. Fiber lengths was used for 6 mm and 12 mm, respectively. As a result of the test, the flow value was very disadvantageous in terms of fluidity due to the carbon fiber ball phenomenon, and the unit weight was slightly reduced. In particular, the compressive strength was decreased with increasing carbon fiber contents. On the other hand, the flexural strength was the highest with 12 mm fiber length and 2% fiber content. As the results of the impact resistance test, the specimens of plain mortar takes about 2~3 times to final fracture, while the specimens of CFRC is somewhat different depending on the increase of the fiber contents. However, when the fiber length is 12 mm and the fiber content is 2%, the impact resistance was the highest.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.182-183
• /
• 2014

In case of large soft body impact test at the construction site, the test conditions are different from conditions at the laboratory, and the length of rope to hold the impact specimen must be changed. In a previous study, the fact that the size of impact load is varied by the length of rope on the large soft body impact specimen was confirmed. In this study, the length of rope and fall height were set as independent variables to conduct the load analysis test. It was determined that the load fluctuation was occurred depending on the length of rope under the fall height over 100 mm, and it is concluded that the additional setup of fall height to modify the actual impact load size is required when the length of rope is below 2.5 m. In this study, the modified formula to put equal size of impact load regardless of the length of rope was extracted through the experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.50-50
• /
• 2020

하천, 강어귀 및 해안 지역의 점착성 유사는 흐름 내에 입자의 충돌에 의한 흡탈착으로 인해 다양한 크기의 플록을 형성한다. 이 플록은 오염물과도 군집을 형성하여 하상이 퇴적되는 경우가 많으며 홍수 등과 같은 외부 충격으로 인해 재부 되어 하천 환경 및 생태계에 악영향을 미친다. 군집의 형성은 화학적인 결합과 물리적인 응집으로 분류할 수 있는데, 미세 점착성 유사의 군집형성에 대한 연구는 주로 화학적인 결합에 대한 연구가 활발하다. 반대로 물리적인 결합 혹은 외부 충격에 대한 플록형성 매커니즘에 대한 연구는 미비한 실정이다. 따라서, 본 연구에서는 교반기를 활용한 실험을 통하여 점착성 유사에 대한 물리적인 흡탈착 과정을 분석하였다. 유입된 점착성 유사를 교반기로 외부충격을 주어 흡착과 탈착하는 정도를 탁도와 농도를 통해 정량화하였다. 실험은 원통 수조에서 수행되었으며, 교반기의 RPM을 조절하면서 외부충격의 강도를 조절하였다. 초기 실험을 통해 탁도-농도의 관계를 제시하였고 이를 활용하여 교반강도와 점착성 유사의 농도를 분석하였다. 실험 결과 교반강도가 증가할수록 플록 형성이 활발하게 진행되었으나, 일정 교반강도 이상에서는 다른 흡착 과정을 보였다. 이를 토대로 점착성 유사의 흡탈착의 임계값을 제시하였다. 향후 본 연구결과와 유속 혹은 난류강도 등의 하천특성과 연관성을 분석한다면 하천 내 오염물 관리에 효과적으로 사용될 것으로 기대된다.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2003.05a
• /
• pp.13-16
• /
• 2003

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.94-97
• /
• 2003

The effect of pressure perturbation in the ramjet engine on the characteristics of the inlet is studied via numerical simulation. The frequency and amplitude of the pressure perturbation are assumed to be 500Hz and 20% of the exit back pressure, respectively. The simulation shows the characteristics of the normal shock in the inlet according to the pressure perturbations. The relation between the captured mass flow rate and downstream pressure perturbation is studied. The mass flow rate decreases when the downstream pressure perturbation starts.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.94-99
• /
• 2003

For the assessment of combustion stability of a liquid rocket engine, a device called "Pulse Gun" should be developed first, which can induce artificial perturbations that may lead to excitations of pressure oscillations in a combustion chamber. A model chamber has been used for identifying design parameters of a pulse gun that defines its characteristics. Dynamic pressure measurements showed that shock waves generated from pulse guns are axisymmetric around the axis of a pulse gun barrel. Pressure waves perturbed by a pulse gun induce resonant acoustic frequencies of a model chamber. This fact indicates that successful pressure field perturbations of the KSR-III combustion chamber can be performed by a newly developed pulse gun device. A maximum value of dynamic pressure peaks measured at the opposite point against a pulse gun outlet becomes stronger as charge mass of pulse gun powder increases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.663-668
• /
• 2014

Mechanical and electrical devices in various forms are used in many different fields. These can be exposed to external environmental factors such as shock. Therefore, a shock test machine is commonly used to test these devices and evaluate their shock resistance. In this test, the break-down or permanent deformation and malfunction of inner parts due to a high stress or acceleration can be evaluated. As part of a shock test machine, a velocity generator is needed to create shocks between objects. In this study, a hydraulic velocity generator was conceptually designed and an AMESim model was developed to simulate the velocity under different conditions. Simulation results using this model were compared with the test results from a reduced-size velocity generator, and we designed a velocity generator that fits the target payload and velocity using the simulation results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.325-330
• /
• 2003

본 논문은 에폭시 지지애자에 센서를 내장하여 활선상태를 감지할 수 있는 제품개발에 관한 것이다. 개발된 제품은 KS C 3835에 따라 7.2[㎸], 12[㎸]및 24[㎸]전압용이다. 지지애자에 내장된 센서 재질은 부분방전이 발생하지 않도록 애자 재질과 동일하게 하였다. 또한 활선상태를 확인할 수 있는 현장용 및 원격용 전압표시장치를 개발하였다. 개발된 애자본체에 대해서는 부분방전, 충격내전압, 상용주파내전압, 굽힘 강도 등 성능평가를 실시하였으며 만족할 만한 결과를 얻었다. 전압표시장치에 대하여도 상용주파내전압 충격 내전압, 진동성 서지, 온도특성 등을 확인한 결과 만족할 만한 결과를 얻었다.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.483-491
• /
• 2002

Polyurethane (PU)/nylon 6 blends were prepared by melt blending with Haake Rheomix at $250^{\circ}C$. The compositions of PU/nylon 6 blends were 10/90, 20/80, 30/70, 40/60, and 50/50 (wt%). The effects of PU contents and blending time on the crystal structure, tan $\delta$, the tensile properties, and the impact behavior were investigated by means of WAXD and DMA, etc. The crystalline diffraction peaks are broadened, and their intensities are reduced with increasing PU contents and blending time. The glass transition temperature, the tensile strength, and the tensile modulus of the blends are also decreased and the elongation at break is increased. The influence of PU content on the crystal structure, tan 3, and the tensile properties of PU/nylon 6 blends is more significant than that of blending time. The impact strength of PU/nylon 6 (10/90 wt%) blends measured at 20 and $-35^{\circ}C$ could be greatly improved.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.