• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.615-623
• /
• 2006

A non-functional requirement is a property or quality that the proposed systems have to support the functional requirements. A non-functional requirement is reflected by quality attribute These non-functional requirements playa crucial role during system development, serving as selection criteria for choosing among decisions. It should be continuously considered through the software development process. In spite of the importance of the non-functional requirements, it received little attention because of ambiguousness and invisibility of non-functional requirements. Therefore non-functional model which is a process to analyze the non-functional requirement is proposed for improving the management efficiency of non-functional requirements. Also, this paper presents the trace among the UML diagrams to the conceptual model. According to the non-functional requirement development process, this paper achieved performance-based case study. After then, non-functional requirement should be traced using the UML diagrams.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.523-535
• /
• 2017

Despite consumers' increasing awareness and interests in innovative wearable devices, the sales growth has been stagnant. To analyze this phenomenon, we investigate consumer preferences for various innovative features embedded in wearable devices. Conducting conjoint analysis on smartwatches, we empirically show that the curse of innovation can occur when the consumer's expected utility from the smartwatch falls short of his/her psychological cost associated with behavior change from smartwatch usage. Therefore, our findings provide managerial implications on the R&D strategy for new technologies and more importantly on the marketing strategy easing consumers' resistance to highly innovative products.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.20-28
• /
• 2002

This paper describes the time sharing type high frequency resonant inviter can be used as power of induction heating. This closed inverter can be obtained output frequency three times than switching frequency by composing three unit inviter of conventional Half-Bridge serial resonant inverter in parallel with input power source also, this reduce switching loss because it has ZVS function. The analysis of the proposed circuit is generally described by using the normailized proposed parameters. The principle of basic operating and the its charasteristics are extimated by the parameters such as switching frequency($\mu$), the variation of Phase angle($\phi$) of Phase-shift. Experimental results are presented to verify theoretical discussion. This preposed inverter will be able to be prastically used as a power supply in various fields as induction, heating application, DC-DC converter etc.

• Journal of Software Engineering Society
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2011

Since smart phones have various embedded sensors and high portability/usability, they have emerged as suitable targets to collect information and to provide intelligent services. That is, with a smart phone, we can collect information about user's circumstances and phone usage from sensors and infer his/her current state which is the significant basis for context-aware services. However, a service system should be founded on a context model to ensure reasonable context-awareness, because context information the system needs depends on its target services. Therefore, in this paper, we propose a hierarchical mobile context model for context inference of smart phone users in their daily life. We classify high-level context which can be draw from sensing data into three levels, Context-Behavior-Situation, and define inference methods for each level. With our mobile context model, we can user's meaningful context in his/her daily life besides simple actions or states.

• Korean Journal of Acupuncture
• /
• v.36 no.1
• /
• pp.19-35
• /
• 2019

Objectives : The purpose of this study is to review which acupoints and meridians are selected to treat visceral pain in articles published in international journals and to investigate quality of reporting acupuncture intervention according to the STRICTA guidelines. Methods : Electrical and hand search were conducted in PubMed, EMBASE, MEDLINE, and Cochrane Library for acupuncture studies on visceral pain in human and animals. Reporting quality of intervention was evaluated using the revised STRICTA guidelines. Results : We included 51 articles (7 clinical studies and 44 animal studies) in this study. The most frequently adopted meridians and acupoints were Stomach meridian, Spleen meridian, Conception Vessel meridian, and ST36, CV4, SP6, LI4, PC6, SP9, ST25, ST37 in clinical studies. In animal studies, Stomach meridian, Conception Vessel meridian, Pericardium meridian and ST36, ST37, CV12, PC6 were most frequently used. Animal studies showed significantly lower quality of reporting compared to clinical studies. According to the analysis on the effect of year of publication of articles, announcement of STRICTA guidelines did not improve the quality of reporting for studies on visceral pain. Conclusions : These results suggest that both proximal and distal acupoints based on meridian theory were used to study the underlying mechanisms of visceral pain both in human and animal studies. Guidelines of acupuncture intervention reporting for animal study is necessary to improve the quality of evidence, and it will also allow us the integrative understanding of the mechanisms and clinical effects of acupuncture treatment in human and animal.

• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.201-211
• /
• 2017

This study was conducted to investigate the vascular plants which can be an indicator of environmental change in Seseok of Jirisan National Park. The purpose of this study was to find out the basic information for the subalpine species. This study showed that the area had a total 295 taxa including 63 families, 177 genus, 252 species, 2 subspecies, 36 variants 5 forms and Pte-Q was 1.7. Among them, Korea endemic plants were 15 taxa such as Abies koreana. Rare plants were 14 taxa such as Viola diamantiaca. Naturalized plants consisted of 5 taxa such as Rumex crispus. The floristic regional indicator plants found in surveyed area were 72 taxa comprising 3 taxa of grade V, 7 taxa of grade IV and 24 taxa of grade III. In summary, The subalpine plants of the survey region consisted of 37 taxa including Abies koreana and Gymnadenia cucullata. As rare plants distributed in subalpine zone respond sensitively to climate change, accuracy distribution range, environmental characteristics of habitat and population dynamics of rare plants should be evaluated quantitatively.

• Journal of Climate Change Research
• /
• v.9 no.3
• /
• pp.293-302
• /
• 2018

This study was carried out to provide basic information on efficient preservation and management of an Abies koreana forest through analyzing the ecological characteristics by slope in Seseok, Mt. Jirisan. Soil moisture content at southern and northern slopes was 29.9% and 21.7%, respectively, and there was no significant difference among soil properties between southern and northern slopes. The importance value of A. koreana in the southern and northern slopes was high for tree and subtree layers, respectively. It is noteworthy that many seedling and saplings of A. koreana were present on the southern slope. The species diversity was 0.413 for the tree layer, 0.632 for the subtree layer, and 0.609 for the shrub layer on the southern slope and 0.396 for the tree layer, 0.783 for the subtree layer, and 1.215 for the shrub layer on the northern slope. Evenness and dominance ranged from 0.371 to 0.609 and 0.629 to 0.391 on the southern slope and from 0.380 to 0.968 and 0.620 to 0.032 on the northern slope, respectively. The mortality of A. koreana was 9.6% on the southern slope and 24.4% on the northern slope, a distinct difference between the slopes. The mortality type at two slopes was the highest proportion of standing dead. Annual mean tree ring growth of A. koreana on the southern slope (1.76 mm/yr) was higher than that on the northern slope (1.64 mm/yr).

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.662-667
• /
• 2021

Vibrotactile feedback is a major function of the latest touch displays, which greatly improves the user's operability and immersion when interacting with the interface on the screen. In this study, we propose a vibrotactile actuator suitable for mounting on the back side of a mid- to large-sized display because it can generate a strong vibration output by applying an electrostatic force-based mechanism and can be manufactured in a thin flat panel type. The proposed actuator was developed in a structure capable of amplifying the vibration force by alternating up and down with electrostatic force by the upper and lower electrodes that are spaced apart from the electrically grounded mass suspended from a radial leaf spring. As a result of the performance evaluation, the developed bar-type module with two built-in actuators showed excellent vibration output of up to 3.3 g at 170 Hz, confirming the possibility of providing haptic feedback in medium and large touch displays.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.114-118
• /
• 2021

In this study, the sensitivity of an active pixel sensor (APS) was adjusted by employing a gate/body-tied (GBT) p-channel metal-oxide semiconductor field-effect transistor (PMOSFET)-type photodetector with a transfer gate. A GBT PMOSFET-type photodetector can amplify the photocurrent generated by light. Consequently, APSs that incorporate GBT PMOSFET-type photodetectors are more sensitive than those APSs that are based on p-n junctions. In this study, a transfer gate was added to the conventional GBT PMOSFET-type photodetector. Such a photodetector can adjust the sensitivity of the APS by controlling the amount of charge transmitted from the drain to the floating diffusion node according to the voltage of the transfer gate. The results obtained from conducted simulations and measurements corroborate that, the sensitivity of an APS, which incorporates a GBT PMOSFET-type photodetector with a built-in transfer gate, can be adjusted according to the voltage of the transfer gate. Furthermore, the chip was fabricated by employing the standard 0.35 ㎛ complementary metal-oxide semiconductor (CMOS) technology, and the variable sensitivity of the APS was thereby experimentally verified.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.139-145
• /
• 2022

As products that consumers want become more diverse, the types of automation equipment are becoming more diverse and advanced to produce competitive products. In general, equipment is manufactured with built-in interface devices (HMI) for users so that operators can efficiently monitor and operate equipment quickly. Because HMI devices are connected to various industrial controllers, elements such as communication protocols of various controllers must be understood and set up in the design stage. Non-experts not only have difficulty choosing compatible items among various protocols, but also have limitations in integrating and operating on one device because screens and settings are statically assigned. This paper proposes a model that can scan information such as equipment ID and communication protocol with QR code using a mobile device, access industrial controller, and remotely operate the displayed equipment screen. The proposed model is expected to increase efficiency in inspection and management of automated equipment as it can easily set, monitor, and operate the communication environment of various automated equipment using one mobile device.