• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.332-340
• /
• 2016

Sunken ships cause damage to the environment due to the dispersal of fuel oil and harmful cargo goods in the hull. Since the sunken ship is mostly flooded by the seabed, it tends to be in a relatively stable condition. However, the heavy body, together with the load of remaining goods in the cargo hold, the constant contact with the seabed, and ocean currents and tidal waves, can affect dispersal of residual fuel oils out of the sunken ship. Corrosion of the sunken ship starts upon sinking, decreasing the thickness of the hull structure and sub-materials. Therefore, it is necessary to assess the structural stability against the potential breakdown of the sunken ship. Whilst evaluating the danger of the sunken ship, this result should be reflected in 'the possible discharge'. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship. The structural stability assessment to estimate the collapsibility of the hull was structure targeted at the sunken ship 'No. 7 HaeSung', which was classified as the prime example for the intensive management of sunken ships. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship and to propose a method to conduct a structural safety assessment that estimates the collapsibility of the hull by targeting the sunken ship 'No. 7 HaeSung',which was classified as the prime example for the intensive management of sunken ships. The collapsibility of the hull structure was estimated Based on the damage size of the hull structure, and the corrosion rate of the hull structure and sub-materials due to the seawater after sinking. It was confirmed that there was a low possibility of the total destruction of the hull structure at the current time. However, there is a high possibility in the potential failure of the hull structure due to increased rate of corrosion thereafter. Therefore, we believe continuous study on influence of corrosion and marine environment change to sunken ship's structural safety is necessary.

• Journal of Yeungnam Medical Science
• /
• v.13 no.1
• /
• pp.116-133
• /
• 1996

The biocompatibility of the titanium has been estabilished through various experimental studies such as cell culture toxicity test, pyrogen test, mutagen test and others. In order to confirm biocompatibility after fabrication of titanium and to clarify the difference between the bone reaction after insertion of the lathed titanium rods and the bone reaction after insertion of the finished and polished rods, both rods were implanted into the proximal femur of a rabbit. Histologic reactions in the bone were observed according to the ASTM standards at the intervals of 6 weeks, 12 weeks and 26 weeks after implantation. The result were as follows : In 6 weeks after implantation of lathed titanium rods, inflammatory reactions, such as minimal degree infiltration of polymorphonuclear leukocytes and lymphocytes were observed in all cases. This was thought to he caused by surgical trauma. However, inflammatory cell infiltration was not seen after implantation of polished and finished rods in all cases. The cellular infiltration and the histologic reaction of the hone after implantation of lathed group were significantly more pronounced than those after implantation of the finished group. In 12 weeks after implantation of lathed rods, two of four cases revealed a minimal degree of cellular infiltration. No inflammatory cell infiltration was demonstrated after implantation of the finished group. The cellular infiltration and histologic reaction seemed to be more pronounced in the lathed group, but they were not significant statistically. At 26 weeks after implantation of the lathed and finished group, there was no cellular infiltration in both groups. New bone formation was observed up 26 weeks, and no difference between lathed titanium rods and finished titanium rods were apparent. Mild bone necrosis was observed in 1 case out of 11 cases in which lathed titanium rods were implanted. Bone necrosis was not observed in the finished titanium rod group. Fibrosis was observed in both groups, but differences were not significant between the experimental groups. In the lathed titanium rods group and the shorter interval group, inflammatory cell infiltration was significantly higher. Finished titanium rods and longer interval groups had markedly decreased tendences in histologic reaction ratings. As a conclusion, although certificated titanium might be safe to use, difference of biocompatibility were observed depending on the method of surface finish. By identifying biocompatibility as a long-term standardized animal study, we can develop progressed internal fixation device that is safe for human beings.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.2
• /
• pp.209-217
• /
• 1999

Backgrounds: To investigate the role of CT as a screening tool and to compare the diagnostic accuracy with that of the fiberoptic bronchoscopy (FOB) in evaluating the causes of hemoptysis. Methods: The retrospective review of plain chest radiograph, CT and FOB was done in 72 patients with hemoptysis. The diagnosis were confirmed by histology (n=33), bacterial culture (n=6), cytology (n=3), serology (n=2), skin test (n= 1), clinical response (n=5), and airway disease mainly by HRCT (n=22). Results: The causes of hemoptysis were shown to be lung cancer (n=29), bronchiectasis (n=19), tuberculosis (n=12), aspergilloma (n=5), invasive aspergillosis (n=l), COPD (n=3) and others (n=3). The sensitivity was 100% and 91,7% by CT and FOB respectively. The diagnostic compatibility was 95.8% and 59.7% by CT and FOB respectively. The diagnostic compatibility in cases with central airway disease was 96.3% and 100 % in CT and FOB. In parenchymal disease, CT and FOB showed 91.3 % and 43.5 % of compatibility, respectively. airway disease, CT and FOB showed 100% and 31.8% compatibility, respectively. That is to say, CT has higher sensitivity and diagnostic compatibility than FOB for identifying the causes of hemoptysis, and is more helpful for patients with hemoptysis from parenchymal or airway disease. FOB had the advantage in obtaining histologic, cytologic and bacteriologic diagnosis with biopsy or washing Conclusion: CT should be used as the screening method before performing FOB for patients with hemoptysis who have normal or nonspecific findings or peripheral airway disease in plain chest radiograph.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.77-85
• /
• 2020

Purpose: The aim of the present study was to investigate the effects of N-acetyl cysteine (NAC) loading on the bone formation surrounding sandblasted, large-grit and acid-etched (SLA) implants. Materials and methods: Implantation of NAC loaded SLA implants (NSI group) and SLA implants (SI group) was performed bilaterally in the mandible of 4 adult beagle dogs (each group, n = 8). The animals were sacrificed after a healing period of 3 and 6 weeks, respectively (n = 2 animal each). Dissected blocks were processed for histomorphometrical analysis. Bone to implant contact percentage (BIC%) and bone volume (BV%) were assessed histomorphometrically. Results: BIC% of NAC loaded SLA implants were about 50% higher than that of SLA implants at 3 weeks of bone healing, but not significantly (51.79 vs 35.43%; P=.185). BV% of NAC loaded SLA implants were significantly higher than that of SLA implants at 3 weeks of bone healing (45.09 vs 37.57 %; P=.044). At 6 weeks of bone healing, BIC% and BV% of two experimental groups were similar (P>.05). Conclusion: Within the limits of the present study, NAC loading have a positive effects on the early bone formation surrounding SLA implants. So, it might be concluded that NAC loading enhance the osseointegration and shorten the healing time after implantation of the SLA implants.

• Korean Journal of Food Science and Technology
• /
• v.49 no.3
• /
• pp.279-285
• /
• 2017

This study reviews the manufacturing characteristics of distilled liquor prepared using Saccharomyces cerevisiae 88-4 separated from traditional Nuruk. From analysis of soju mash (sool-dut) during the fermentation process, 17.2% of alcohol was detected in the final fermentation with succinic acid present at the highest level ($7,164.3{\pm}85.2ppm$). From the analysis of alcohol content in different distillation conditions, distillation condition No. 6 showed the lowest amount of alcohol ($29.6{\pm}0.0%$), whereas distillation condition No. 4 showed the highest amount ($59.9{\pm}0.1%$). N-propanol has been detected at the highest level in distilled liquor under conditions No. 1 and 4, each being $163.4{\pm}18.3$ and $174.0{\pm} 0.1ppm$, respectively. Isobutanol showed a tendency similar to n-propanol. Distilled liquor in conditions No. 1 and 4 has shown the highest acetaldehyde level, each being $303.4{\pm}4.5$ and $325.4{\pm}13.1ppm$, respectively. After distillation, 14 volatile substances were found in common, with isoamyl alcohol present at the highest levels in all the distilled liquors. Distillation conditions No. 3, 5, 6, and 7 have shown high levels of isobutanol that emits a banana-like fragrance and ethyl octanoate that emits a pleasant fruity and floral fragrance.

• Atmosphere
• /
• v.23 no.3
• /
• pp.293-305
• /
• 2013

Nonhydrostatic effects on convectively forced mesoscale flows in two dimensions are numerically investigated using a nondimensional model. An elevated heating that represents convective heating due to deep cumulus convection is specified in a uniform basic flow with constant stability, and numerical experiments are performed with different values of the nonlinearity factor and nonhydrostaticity factor. The simulation result in a linear system is first compared to the analytic solution. The simulated vertical velocity field is very similar to the analytic one, confirming the high accuracy of nondimensional model's solutions. When the nonhydrostaticity factor is small, alternating regions of upward and downward motion above the heating top appear. On the other hand, when the nonhydrostaticity factor is relatively large, alternating updraft and downdraft cells appear downwind of the main updraft region. These features according to the nonhydrostaticity factor appear in both linear and nonlinear flow systems. The location of the maximum vertical velocity in the main updraft region differs depending on the degrees of nonlinearity and nonhydrostaticity. Using the Taylor-Goldstein equation in a linear, steady-state, invscid system, it is analyzed that evanescent waves exist for a given nonhydrostaticity factor. The critical wavelength of an evanescent wave is given by ${\lambda}_c=2{\pi}{\beta}$, where ${\beta}$ is the nonhydrostaticity factor. Waves whose wavelengths are smaller than the critical wavelength become evanescent. The alternating updraft and downdraft cells are formed by the superposition of evanescent waves and horizontally propagating parts of propagating waves. Simulation results show that the horizontal length of the updraft and downdraft cells is the half of the critical wavelength (${\pi}{\beta}$) in a linear flow system and larger than ${\pi}{\beta}$ in a weakly nonlinear flow system.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.681-687
• /
• 2007

This study was designed to examine the suitable characteristics of potential probiotic bacteria. Possible probiotic bacteria, including Lactobacillus acidophilus DDS-1, Lb. acidophilus B-3208, Bifidobacterium bifidum KCTC 3357, Lb. plantarum, Leuconostoc mesenteroides ssp. mesenteroides ATCC 8293, and Lactococcus lactis ssp. lactis ATCC 7962 were selected. We then measured their acid and bile tolerances, adhesion properties in the gastrointestinal tract, antimicrobial activity against pathogenic bacteria, and immunomodulation activity. The acid tolerances of Lb. acidophilus DDS-1, Lb. acidophilus B-3208, Lb. plantarum, and Leu. mesenteroides ssp. mesenteroides ATCC 8293, in PBS (pH 2.5) for 2 hr, were high enough that 50% of the inocula survived. The bile tolerances of all bacteria, except Lc. lactis ssp. lactis ATCC 7962, were also observed at a 3% oxgall concentration in MRS broth. The results of the adhesion property assay showed that the total binding affinities of Lb. acidophilus DDS-1, Lb. acidophilus B-3208, and B. bifidum were about three times higher than those of the other bacteria. In testing their antimicrobial activities against pathogens, Lb. acidophilus B-3208, B. bifidum KCTC 3357, and Lb. plantarum inhibited the growth of pathogenic bacteria. For their immunomodulation activity, the cell wall fractions from Lb. acidophilus DDS-1 and Lb. acidophilus B-3208 showed the highest bone marrow cell proliferation activities. However, the cell wall fractions of Lb. acidophilus DDS-1 and B. bifidum, and the cytosol fraction of Lc. lactis ssp. lactis ATCC 7962 showed higher macrophage stimulation activities than those of the other bacteria. Since Lb. acidophilus DDS-1 and Lb. acidophilus B-3208 satisfy the requirements for probiotics, they can be considered suitable probiotic bacteria.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.237-242
• /
• 2013

In the intracranial regions, an accurate delineation of the target volume has been difficult with only the CT data due to poor soft tissue contrast of CT images. Therefore, the magnetic resonance images (MRI) for the delineation of the target volumes were widely used. To calculate dose distributions with MRI-based RTP, the electron density (ED) mapping concept from the diagnostic CT images and the pseudo CT concept from the MRI were introduced. In this study, the look up table (LUT) from the fifteen patients' diagnostic brain MRI images was created to verify the feasibility of MRI-based RTP. The dose distributions from the MRI-based calculations were compared to the original CT-based calculation. One MRI set has ED information from LUT (lMRI). Another set was generated with voxel values assigned with a homogeneous density of water (wMRI). A simple plan with a single anterior 6MV one portal was applied to the CT, lMRI, and wMRI. Depending on the patient's target geometry for the 3D conformal plan, 6MV photon beams and from two to five gantry portals were used. The differences of the dose distribution and DVH between the lMRI based and CT-based plan were smaller than the wMRI-based plan. The dose difference of wMRI vs. lMRI was measured as 91 cGy vs. 57 cGy at maximum dose, 74 cGt vs. 42 cGy at mean dose, and 94 cGy vs. 53 at minimum dose. The differences of maximum dose, minimum dose, and mean dose of the wMRI-based plan were lower than the lMRI-based plan, because the air cavity was not calculated in the wMRI-based plan. These results prove the feasibility of the lMRI-based planning for brain tumor radiation therapy.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.299-305
• /
• 2009

A new six-rowed naked barley cultivar "Jinjuchal" with high whiteness after cooking and high $\beta$-glucan content was developed from the cross between 'Jinmichapssalbori' with high winter hardiness, lodging tolerance, grain whiteness and pearling yield, and 'Suwon 333' with waxy endosperm by the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. An elite line, SB962002G-B-B-B-84-4 was selected in 2002 and designated as 'Iksan 79' It showed good agronomic performance in the regional yield trials (RYT) from 2005 to 2007 and was released with the name of "Jinjuchal" possessing high whiteness and low proanthocyanidin waxy endosperm. The average heading and maturing dates of "Jinjuchal" were April 27 and June 1 in paddy field, which were same and one day later than those of the check cultivar 'Saechalssalbori' respectively. The new cultivar, "Jinjuchal" had 81 cm of culm length that was 1cm longer than that of 'Saechalssalbori' and 4.9 cm of spike length. It showed 673 spikes per $m^2$, 56 grains per spike, 27.0 g of 1,000-grain weight, and 752 g of test weight. "Jinjuchal" showed stronger hardiness and better resistance to powdery mildew and BaYMV (Barley yellow mosaic virus) than those of the check cultivar, 'Saechalssalbori' It showed higher $\beta$-glucan content(8.4%) and water absorption rate than those of the check cultivar, 'Saechalssalbori' Its average yield of the pearled grain in the regional yield trial was 3.79 MT/ha in upland, and 3.73 MT/ha in paddy field, which were 1% lower and 3% higher than those of the check cultivar, respectively. Total phenol and proanthocyanidin contents were 4.2 and 0.2 mg/g, respectively. This cultivar is suitable for the area of the daily minimum temperature above $-6^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.31-38
• /
• 2008

This experiment was carried out to improve the anther culture efficiency of barley (Hordeum vulgare L.). Callus induction rates from anther cultures of the five domestic naked barley and four unhulled varieties ranged from 0 to 5.6%, and plant regeneration rate to callus was 30.4% in the donor plants grown in a greenhouse during winter, among which the green plant regeneration rates ranged from 0 to 4.4%. Plant regeneration rate was 30.4% in the donor plants grown in a greenhouse during winter, whereas 21.3% in the normal field condition in spring. In addition, callus induction rates were 19.2% in plants grown in a normal field and 7.2% in drought-stressed condition, respectively. Being Considered the anther culture efficiency affected by the sampling time, the optimum sampling stage of anthers was 3~4 days before heading when the length between the 1st and 2nd auricles reaches 5 to 10 cm and at the uninucleate of pollen which the tip of the 2nd auricle aligns with the middle of panicle in the leaf sheath. Best callus induction rates came from the anthers stored at $4^{\circ}C$ for 3 weeks in a 10 to 15 cm diameter polyethylene bag with 5 to 10 panicles and Duwonchapssalbori and Saessalbori showed the higher induction rate of 4.8% and 1.7%, respectively.