• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.55-57
• /
• 2007

오일 변압기 내부의 절연물은 절연지, 프레스보드, 광유 또는 식물유가 주로 사용되고 있다. 사용 기간과 과부하 조건에 따라 열화정도가 달라질 수 있으며, 내부 절연물의 열분해 및 가수분해로 인해 수분은 자연스럽게 생성될 수 있다. 생성된 수분은 절연을 약하게 하는 주된 요인으로 작용해 기기의 고장 또는 정전을 초래할 수도 있다. 본 논문에서는 변압기 내부 절연물의 주파수응답 특성과 절연상태 값을 바탕으로 변압기 내부를 전기적 소자로 등가화하였다. 그 후 등가화된 회로를 이용해 회복전압법의 원리에 따라 EMTP 프로그램을 활용해 분극특성을 모의하였다. 실제 측정 값과의 비교를 위해 보고된 문헌의 데이터를 활용하였고, RVM을 이용한 실측값과 유사한 결과를 얻게 되었다. 따라서 본 시뮬레이션에 활용된 전기적 소자값을 변경함으로서 내부 절연물의 열화정도에 대한 기대 파형을 예측할 수 있는 유용한 도구로 활용될 수 있음을 확인하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.4
• /
• pp.19-26
• /
• 2012

In this paper, a parametric study on ribs which are installed in an equilateral triangular internal cooling channel is presented. The numerical analysis of the flow structure and heat transfer characteristics is performed using three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model. The numerical results are obtained at Reynolds number, 20,000. The parametric study is performed for the parameters, the angle of a rib, rib pitch-to-hydraulic diameter ratio, rib width-to-hydraulic diameter ratio, and rib height-to-hydraulic diameter ratio. The computational results are validated with the experimental data for area-averaged Nusselt number.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1554-1555
• /
• 2011

안정적인 전력공급을 위해 전력설비 진단이 중요시 되고 있고 이를 위해 변전기기인 변압기의 초기고장 검출을 통한 예방진단 기술을 필요로 하고 있다. 변압기 예방진단 기술 중에서도 유중가스진단은 가장 오래되고 신뢰성이 입증된 기술이다. 기존의 유중가스진단법들은 가스비분석법을 이용하고 있는데 대상 가스들이 절연유에의 열화에 의해 발생하는 가스들이고 주위 운전환경에 대한 고려가 부족하여 진단이 불가능하거나 진단오류가 발생한다. 본 연구에서는 절연유뿐만 아니라 고체절연물에 대한 열화를 고려하기 위하여 변압기 내부 결함 모의 시험 쳄버를 제작하고 시험 결과를 바탕으로 진단 알고리즘을 개발하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.322-324
• /
• 2008

현재 배전용변전소 대용량변압기 냉각방식은 주로 유입자냉식, 유입풍냉식, 송유풍냉식 및 수냉각 방식이 채용되고 있다. 유입풍냉식의 경우는 대기 공기의 자연대류 또는 냉각팬에 의한 강제대류에 의해 방열기 내부로 유입된 절연유의 온도를 낮추는 방식이고 송유풍냉식은 변압기 내부 절연유를 강제순환 시키면서 냉각팬을 가동하는 방식이다. 도심지 복합건물내 주변압기 냉각은 수냉식을 채용하여 절연유를 강제로 순환시키면서 열교환기 2차측에 냉각수를 순환시켜 열교환기 내로 유입된 절연유의 온도를 낮추는 방식이다. 그러나 도심지 변전소의 냉각방식 채택에 있어 냉각성능, 소음, 설비의 건전성등 여러 가지 문제점이 드러나 새롭고 획기적인 냉각방식이 요구되고 있다.

• Journal of Power System Engineering
• /
• v.16 no.5
• /
• pp.26-31
• /
• 2012

A numerical study has been carried out to investigate the heat and mass transfer of an oil pumping system with a variable shape of the housing using the CFD method. Especially, the electric motor and the pump combined together, accomplishes a research about the oil supplying system. In this study, the temperature and velocity distribution of the oil pumping system by varying the flow rate of supplying oil have been investigated. The temperature changes with each five conditions(flow rate of supply oil : 2, 4, 8, 12, and 16 liter/min) have also been studied. The numerical results show that the exhaust temperature decreases as the flow rate of the supplying oil increases. It also reveals that the temperatures change differently with the housing shape.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.386-386
• /
• 2009

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2015

This study examined the relationship between the shape of the inside of the PRV and the cavitation of the water supply system of an apartment house. In this paper, nine types of PRV with different gaps and shapes were analyzed numerically using a 3D model embedded in the commercial code, ANSYS-CFX. The lowest pressure and the maximum velocity occurred at the narrow gap, which is located at the between the stem and the disk. When the gap size was increased, the vapor volume fraction was always greater than 0, but the vapor volume fraction of the type of expansion pipe approached 0. These results indicate that the cavitation of PRV can be reduced by a shape change to the type of expansion pipe.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.818-823
• /
• 2002

Effects of pelleting, drying, conditioning, and additives on the characteristics of Yukwa (fried pellet) were determined. RVA maximum paste viscosity of Bandegi (waxy rice pellet) was the highest after 2 days of moisture conditioning process, and decreased 2 days later. Air bubbles in Bandegi were distributed uniformly but were not significantly affected by conditioning time. For higher expansion and softer texture of Yukwa, the optimum moisture content of dried and conditioned Bandegi was $14{\sim}17%$. The addition of soymilk and 25% alcohol (Soju) as additives was also effective for achieving higher expansion and soft texture of Yukwa, respectively. Larger air cells were distributed in the center and smaller ones on the edge of Yukwa.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.257-265
• /
• 2012

In this study, a series of CFD (Computational Fluid Dynamics) simulations carried out to evaluate the optimum design model of the internal flow path of drill bit. The Star-CCM+ code was adopted to simulate the multi-phase discharge flow of rock particles and flushing air during a drilling process. The input parameters for the flow simulation of rock particles and air were obtained from the in-situ drilling test results. After the three design factors were determined, the experimental design method (Taguchi method) was utilized to evaluate the optimum value of each factor.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.248-255
• /
• 1999

Catalytic cracking of pyrolysed waste lubricating oil over solid acid catalysts (HY zeolite, ${\beta}$-zeolite, HZSM-5) has been carried out in a micro-fixed bed system. The feed oil for catalytic activity tests has been prepared by thermal cracking of waste lubricating oil under the reaction conditions of 480$^{\circ}C$, 60 min. Optimum reaction conditions for the maximum light oil yields($\_$21/) were WHSV(weight hourly space velocity)=1 at 375$^{\circ}C$. The amounts of total and strong acid sites appeared to be the largest in ${\beta}$-zeolite as determined by NH$_3$, TPD. It is seen that the catalytic activity order, in terms of the light fuel oil ($\_$21/) production, were HY zeolite)${\beta}$-zeolite>HZSM-5. Also, coke formation followed the same order. The highest activity in HY zeolite may be attributed from the fact that it has supercages facilitating the easy diffusion of larger molecules and also the effectiveness of the acid sites for cracking within the pore. This fact could be confirmed by the coke formation characteristics.