• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.4
• /
• pp.341-348
• /
• 2005

The quality characteristics of bread added with the levels of $0\%,\;1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were investigated. Mixing water absorption capacity was increased by increasing amounts of prickly pear powder. Mixing time of dough was increased compared to that of wheat flour by added prickly pear powder, while it decreased as prickly pear powder content increased. Dough stability of wheat flour added with $1.0\%$ prickly pear powder was similar to wheat flour dough, while decreased by increasing amount of prickly pear powder at the range of $2.0\~4.0\%$. Pasting temperature($66.1\~66.9^{\circ}C$) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder was lower($67.8^{\circ}C$) than that of wheat flour. Peak viscosity($2,226\~2,375$ cp) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were higher(2,288 cp) than control, and increased with increasing amount of prickly pear powder Setback($797\~750$ cp) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were lower(803 cp) than that of wheat flour, and decreased with increasing amount of prickly pear powder. The volume of dough added with prickly pear powder decreased compared to that of the wheat dough. The specific loaf volume of bread added with prickly pear powder decreased($8.0\~18.5\%$) compared to that of the wheat bread. Color of crumb was deep red gradually with the increasing amount of substituted prickly pear powder. Hardness, adhesiveness, gumminess and chewiness of bread were increased gradually with the increasing amount of substituted prickly pear powder but the springiness was decreased. The sensory evaluation showed that bread of wheat flour added with $2.0\%$ prickly pew powder was superiority than the wheat flour bread.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.187-191
• /
• 2011

Rising soil temperature was effectively controled by shading net of 50% and cooled water to maintain average $18.8^{\circ}C$ (maximum $23^{\circ}C$), then shading net of 50% and ground water to maintain average $23.2^{\circ}C$ (max. $28.5^{\circ}C$), shading paint of 30% and shading net (50%) to maintain average $24^{\circ}C$ (max. $30^{\circ}C$) in that order. Alstroemeria 'Modena' most affected by shading and cooling water was better in shoot length as 95.9 cm and fresh weight as 67 g than those of other treatments. The production of cut flower was increased more 121% with treatment 50% shading net and cooling water, 59% with 50% shading net and ground water, and 65% with 30% shading paint than that of 50% shading net, respectively. Soil temperature was higher $8^{\circ}C$ with the plot of circulating warm water than untreated control plot. Alstroemeria 'Aspen', 'Modena', and 'Chanel' increased more plant growth such as plant height, fresh weight in warm water than in untreated control plot, but Alstroemeria 'Bordeaux' decreased plant height. Because of increasing plant growth, flower quality such as peduncle length, peduncle diameter, floret number and flower weight of 4 all cultivar was better in the plot of circulating warm water than untreated control plot. Also, the production of cut flower was increased the most in Alstroemeria 'Modena' by 38%, 'Aspen', 'Bordeaux', and 'Chanel' in that order.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2018

Tiarella polyphylla D. Don is a native plant distributed only in Ulleung Island in Korea and has been traditionally used for medicinal purposes, although it is also used ornamentally. This study was conducted to determine the requirements for dormancy break and germination and to classify the type of seed dormancy. The experiments were performed with cold stratification (0 or 12 weeks at $5^{\circ}C$), warm stratification (0, 4, 8, or 12 weeks at $23^{\circ}C$, followed by 8 weeks at $5^{\circ}C$, and then incubation at $23^{\circ}C$), and $GA_3$ treatments (0, 10, 100, or 1000 mg/L). The treated seeds were incubated on aseptic media at room chamber ($23^{\circ}C$, a 16h photoperiod of fluorescent lamps with $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The seeds were dispersed in nature as underdeveloped embryos with no physical barrier to absorb water to prevent water absorption. However, the seeds did not germinate for 30 days after sowing without any pre-treatments. Thus, the seeds had morphological dormancy (MD) and physiological dormancy (PD). The final germination percentage following cold stratification (0 or 12 weeks) was 66.7% and 45.6%, respectively. The cold stratification delayed seed germination by about 3 weeks. In the warm stratification experiment (0, 4, 8, or 12 weeks), the final germination percentage was 21.1%, 27.8%, 41.1%, and 57.8%, respectively, 20 weeks after sowing. The embryos of the T. polyphylla seed grew in relatively warm temperatures ($23^{\circ}C$). $GA_3$ application overcame seed dormancy and promoted germination. Following $GA_3$ treatment (0, 10, 100, or 1000 mg/L), the final germination percentage was 33.3%, 45.0%, 42.5%, and 72.5%, respectively. These results suggest that the T. polyphylla seeds had non-deep simple morphophysiological dormancy (MPD) and $GA_3$ treatment could be used as a substitute for warm stratification for breaking seed dormancy. To our knowledge, this is the first report of seed dormancy characteristics of the genus Tiarella native to Korea.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.115-126
• /
• 2013

Recently Korea considers the source of biomass burning emissions reflecting national characteristic, so that includes the inventory of emission source but preceding research is rarely implemented in Korea. Therefore, a study on characteristics of greenhouse gas emissions from biomass burning is necessary and it also makes the source management effectively when the climate-atmospheric management system takes effect. In this study, using the manufactured charcoal kiln and the number of experiment was three times to get a reliable experiment result. The sampling time was decided by changing degree in charcoal kiln and charcoal manufacturing process. The results of calculation greenhouse gas emission factor from charcoal kiln were $668g\;CO_2/kg$, $20g\;CH_4/kg$, $0.01g\;N_2O/kg$. Using the emission factor developed in this study, estimate the emissions from charcoal kiln in Korea. The results of calculation were $46,040ton\;CO_2/yr$, $1,378ton\;CH_4/yr$, $0.69ton\;N_2O/yr$ and greenhouse gas emissions applying GWP are as follows. $CH_4$ emissions was $28,947ton\;CO_2eq./yr$, $N_2O$ emissions was $214ton\;CO_2eq./yr$. As a results, Gross emissions of charcoal kiln in Korea was $75,201ton\;CO_2eq./yr$, but the oak used in this study is included to the biomass so emissions of $CO_2$ are excluded. Therefore the net emissions of charcoal kiln in Korea was $29,161ton\;CO_2eq./yr$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.80-89
• /
• 2022

In order to solve the limitations of horizontal thermal environment improvement, this study compared the thermal environment of the indoor and outdoor of a building in summer according to the presence or absence of a green curtain, a vertical greening method. In the summer of 2021, the air temperature, relative humidity, wind speed, and shortwave and longwave radiation were measured at a central point inside a building and the grass field outside of the building to determine the human thermal sensation index, PET and UTCI. As a result, the green curtain showed an average 1.6℃ cooler air temperature during the daytime, but it did not have an effect at night. For relative humidity, it showed higher humidity indoors by an average of 5.6% and 1.0% during the daytime and at night, respectively. Wind speed was 1.4-1.8 ms^-1 and 1.4-1.5 ms^-1 higher outdoors on average during the daytime and at night, respectively, showing a high value outdoors regardless of whether a green curtain was installed. The green curtain showed an average indoor mean radiant temperature reduction effect of 4.7℃ during the daytime, but it did not have an effect at night. In PET and UTCI, the green curtain reduced the indoor PET by about a 1/3 level, an average of 2.1℃, and the indoor UTCI by about a 1/6 level, an average of 1.1℃, during the daytime. However, no effects appeared in PET and UTCI at night. For landscape planning, a green curtain can effectively modify the thermal environment during the daytime in summer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.603-614
• /
• 2008

End-uses of household water have been changed by a life style, housing type, weather, water rate and water supply facilities etc. and those variables can be considered as an internal and exogenous factors to estimate long-term demand forecasts. Analysis of influential factors on water consumption in households would give an explanation to cause on the change of trend and would help predicting the water demand of end-use in household. The purpose of this study is to analyze the demand trends and patterns of household water uses by metering and questionnaire such as occupation, revenue, numbers of family member, housing types, age, floor area and installation of water saving device, etc. The peak water uses were shown at Saturday among weekdays and July in a year based on the analysis results of water use pattern. A steep increase of total water volume can be found in the analysis of water demand trend according to temperature from $-14^{\circ}C$ to $0^{\circ}C$, while there are no significant variations in the phase of more than $0^{\circ}C$, with an almost stable demand. Washbowl water shows the highest and toilet water shows the lowest relation with temperature in correlation analysis results. In the results of ANOVA to find the significant difference in each unit water use by exogenous factors such as housing type, occupation, number of generation, residential area and income et al., difference was shown in bathtub water by housing type and shown in kitchen, toilet and miscellaneous water by numbers of resident. Especially, definite differences in components except washbowl and bathtub water, could be found by numbers of resident. Based on the result, average residents in a house should be carefully considered and the results can be applied as reference information, in decision making process for predicting water demand and establishing water conservation policy. It is expected that these can be used as design factors in planning stage for water and wastewater facilities.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.6-25
• /
• 2024

This study concentrated on a report on the results of smelting experiments conducted eight times by the Jungwon National Research Institute of Cultural Heritage, put together the goals and results of the operation, and examined changes in the content of experiments and in the experimental results. First, changes related to operation, such as the ratio of raw materials to fuel and the presence or absence of additives, were reviewed depending on the operation goal. In addition, the results of metallurgical analysis of raw materials, formations, and byproducts were summarized and reviewed by comparing them with materials excavated from the ruins. The operation method varied up to the eighth smelting experiment in terms of iron ore roasting, additives, and raw material/fuel ratio. After reviewing the results again, pure iron with a low carbon content began to be confirmed through metallurgical analysis. As a result, it was confirmed that the charging ratio of raw materials and fuel plays an important role depending on the purpose of production. In addition, most of the products are gray cast iron, and it was deemed that this is due to changes in the internal structure of the pig iron while it was left in the furnace for a long time. The iron was an ingot that was in a molten state even though the carbon content did not reach 4.3%, where the process reaction takes place, and it was deemed to have been caused by excessive operating temperature. Based on the previously reviewed results and the structure and shape of the experimental furnace used in other ironmaking technology restoration experiments, this study finally attempted to restore the structure of an ancient iron smelting furnace, including the furnace's upper structure. By comprehensively referring to the remaining conditions of the excavated iron smelting furnace and the characteristics of the blow pipe, the form of the ancient iron smelting furnace was subdivided into six categories: furnace wall thickness, furnace height, blower height, blow pipe size, furnace inner wall shape, and top shape, and a restoration plan was proposed. To improve the problems of the restoration plan and the Jungwon National Research Institute of Cultural Heritage's experiments that have been conducted through continuous trial and error, an experiment that reflects changes in operating methods by lowering the furnace height and controlling the blowing volume is necessary.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.2
• /
• pp.49-67
• /
• 2006

A mesocosm, an artificial tidal flat ecosystem, was constructed outdoors to simulate in situ physical and biochemical environmental conditions of natural tidal flat as much as possible. During the experiment from February to August 2004, the study was focused on the biogeochemical variations of superficial water and porewater after introduction of freshwater into the mesocosm. The mesocosm has three experimental conditions; SW-M-T: maintaining the saline water of approximately 20 psu; FW-M-T: complete exchange of freshwater ul the mesocosm with continuous mixing of water column: FW-NM-T: complete exchange of saline water to freshwater in the mesocosm without mixing of water column. Mass extinction of benthic macrofauna appeared due to drastic decrease of porewater salinity from 20 psu to less than 10 psu between the 63th and 91st day of freshwater introduction in FW-M-T and FW-NM-T. Throughout the periods, 7/8 of bivalves and 2/3 of polychaete populations have been extinguished in the sediment. In FW-NM-T, as temperature rises, both evident decrease of DO in water column and active release of DIP from sediment were observed. ${NO_3}^-$ was removed from water column into sediment throughout the periods. Therefore extremely low ${NO_3}^-$ was found during late spring and summer. Whereas ${NH_4}^+$ exhibited only $1/2{\sim}1/8$ of ${NO_3}^-$ concentration. Unexpectedly even after mass extinction of benthic macrofauna, we were not able to find high ${NH_4}^+$. This mesocosm study suggests that when fresh water introduce to natural tidal flat, its sediment activity functions as a potential source of DIP, but a sink of ${NO_3}^-$.