• Title/Summary/Keyword: 내부 순환 비

Search Result 164, Processing Time 0.03 seconds

A study on enhancement of nitrogen removal efficiency on low concentration influent sewage (단계유입과 내부순환을 이용한 저농도 하수의 질소처리효율 향상을 위한 연구)

  • Choo, Tai-Ho;Kim, Tae-Ki;Ok, Chi-Youl
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.2
    • /
    • pp.675-680
    • /
    • 2010
  • This study was investigated to complement nitrogen removal of low concentration influent municipal sewage. The following are the results of the effect of Internal Recircularion and Step Feed rates on Treatment efficiency at a BOD low concentration influent municipal sewage. Up to 90.0% of BOD, 87.8% of COD, 71.0% of T-N, 75.3% of T-P were removed on average at a low concentration influent. Whereas BOD and T-P were removed without any relations to Step Feed rates, T-N was influenced. Nitrogen removal efficiencies in 80% of Step Feed rates was 65%, which was caused by the lack of Carbon Source for denitrification. Nitrogen removal efficiency in 40% of Step Feed rates was 58%, which means it was not removed but dischared. Consequently, the efficiency was 73%, 80%, and 78% in 70%, 60% and 50% of Step Feed rates, which was concluded as the best range of Step Feed rates. Nitrogen removal efficiency increased under the condition of Internal Recircularion. At over 150% of Internal Recircularion rate, the efficiencies were not affected any more. It is believed that lots of Recircularion caused inflow of DO to anoxic tank. Therefore, the most appropriate Internal Recircularion rate can be concluded as 50~150%.

블라인드 장착에 따른 실내 공기 순환 연구

  • Nam, Do-U;Hwang, Jae-Min
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.625-627
    • /
    • 2016
  • 본 논문은 EDISON CFD의 전처리기, eMEGA를 이용하여 격자를 생성하고, 2차원 정렬 격자 기반 비압축성 해석자를 이용하여 유동해석을 진행한 뒤 후처리기, eDAVA를 통해 유동선을 그려 블라인드 장착에 따른 실내 공기 순환에 대한 연구 내용을 담고 있다. 본 연구는 시중에 판매중인 사생활 보호용 블라인드를 포함, 여러 블라인드의 장착 여부에 따라 실내 내부 공기 순환의 양상을 확인하고 실제로 블라인드 장착 시 실내환기에 어떤 영향을 주는지 유동 선을 통해 확인해 보았다. 블라인드 미장착시, 실내 전체적으로 공기가 고루 순환되는 모습을 보였으며, 블라인드 장착 시 대체로 블라인드 형태에 따라 유동이 이동하는 것을 볼 수 있었다. 본 연구는 사생활 보호와 환기 효율성의 관점에서의 소비자 선택권에 영향을 미치는 효과를 가져 올 것으로 보인다.

  • PDF

Mixing effect of aeration in thermally stratified water (물순환장치 가동에 따른 온도 성층화 혼합 효과)

  • Choi, Seongeun;Hwang, Jin Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.61-61
    • /
    • 2021
  • 온도 성층화는 많은 저수지와 댐에서 흔히 발생하는 현상으로 호수나 저수지의 표면 온도가 바닥보다 상대적으로 높아 깊이에 따른 열 구배를 나타낸다. 이러한 온도 성층화 현상은 여름철과 같이 상부와 하부의 온도 차가 클수록 안정적이게 나타나며 이러한 층화 현상으로 수직 확산이 제어되어 수질에 영향을 미친다고 알려져 있다. 따라서 댐이나 호수 등 층화 현상이 심한 유체 내부 바닥에 물순환장치를 설치하여 외부로부터 공기를 끌어와 하부에서 공기를 분출하여 온도 성층을 약화시키기도 한다. 물순환 장치를 설비하면 수체의 혼합이 용이해지며 물질전달이 개선되어 수질이 향상된다. 국내의 경우 대청댐, 보령댐, 영주 댐 등 많은 국내 댐 내부에 물순환장치가 설비되어있다. 본 연구에서 댐의 물순환장치의 성능을 파악하기 위해 산기식 물순환 장비가 설치되어있는 영주댐을 연구 대상 지역으로 잡았다. 연구지역의 계절별 성층구조 및 특성을 조사하기 위해, 봄, 여름, 가을 영주댐에 방문하여 관측 자료를 취득하였으며 물순환 장치는 봄철의 경우만 가동하였다. 봄철의 물순환 장치 가동 전후 관측 데이터를 바탕으로 수치모형실험을 실행하여 관측 결과와 비교 및 검증하였다. 이를 바탕으로 여름, 가을에 물순환장치를 가동하였을 경우 댐 내부 수체의 혼합과정을 살펴보는 연구를 진행하였다. 본 연구는 CFD (Computational Fluid Dynamic) 시뮬레이션을 수행하기 위해 오픈 소스 소프트웨어 OpenFOAM(version 4.0)에서 열 전달이 포함되어있는 비압축성 VOF 솔버를 사용하였다. 본 솔버는 물과 공기를 동시에 나타낼 수 있으며 온도의 확산 방정식을 포함하고 있다. 또한 유동해석 수행 시 사용한 물순환장치의 효울은 실제 장치의 효율과 동일하다. 본 연구의 목표는 다음과 같다. (1) 관측만으로 파악하기 어려운 수체의 혼합거동을 유동해석 자료를 통해 면밀히 살펴보고 (2) 봄철 물순환 장치가 작동하기 전후 자료를 바탕으로 여름 및 가을철 물순환장치 가동 전후 데이터를 유동해석 자료로 취득한다. (3) 또한 물순환장치 가동 전후 데이터를 통해 계절별 혼합 효율을 취득한다.

  • PDF

Characteristics of Shear Strength for Recycled Fine Aggregates Mixed Soil (순환잔골재 혼합토의 전단강도 특성)

  • Im, Weulsook;Kwon, Jeunghoon;Kim, Minwook;Kim, Youngmuk
    • Journal of the Korean GEO-environmental Society
    • /
    • v.11 no.6
    • /
    • pp.47-55
    • /
    • 2010
  • The recycled fine aggregates were mixed with weathered granite soils typically used for fill materials and tested engineering properties, physical properties, and compaction characteristics according to the mixing ratio of the mixed soils. The results of this study were as follows. For the results of A-type compaction test, the recycled fine aggregates showed low effects compared to the weathered soils, but the mixed soils which were mixed with the weathered granite soils and the recycled fine aggregates showed good compaction effects. Especially, the mixing ratio of 70:30 by weight showed for maximum compaction result. From the results of the direct shear test, the cohesion was ince csed according to proportion of the weathered granite soils. The weathered granite soils neared the optimum moisture content showed for maximum shear strength paramcoers, while the cohesion of the mixed soil was relatively ince csed in the wet side of the optimum moisture content. This trend was seemed to remained cence composition in the recycled fine aggregates. The internal friction angle of the recycled fine aggregates and the mixed soils showed maximum value near dry side of the optimum moisture contents. And the internal friction angles of the mixed soils were increased according to higher proportion of the recycled fine aggregates.

Coal Gasification characteristics in an Internally Circulating Fluidized bed (내부순환유동층에서의 석탄 가스화 반응 특성)

  • 김용전;이종민;김상돈
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1995.11a
    • /
    • pp.15-18
    • /
    • 1995
  • 내경 0.1 m, 높이 0.9 m 의 draft tube 를 갖는 직경 0.3 m, 높이 2.7 m 인 내부순환유동층가스화 반응기에서 생성가스분리대를 설치하여 가스화구역에서 생성된 생성가스를 분리하여 중열량가스를 얻었다. 석탄공급량 4.3 - 8.6 kg/hr, $O_2$/C 의 비 0.25 - 0.35, $H_2O$/C 의 비 0.75 - 1.35 의 조업변수 변화조건에서 생성가스의 조성과 발열량이 측정되었다. 반응 온도가 증가함에따라 H$_2$ 와 CO가 증가하고 $CO_2$$N_2$는 감소하여 생성가스 발열량이 10 - 11.5 MJ/㎥ 으로 증가하였다.

  • PDF

finite Element Analysis of Nonisothermal Flows in Single-Screw Extruders (싱글-스크류 압출공정에서의 비등온 유동의 유한요소 해석)

  • 권태헌
    • The Korean Journal of Rheology
    • /
    • v.3 no.1
    • /
    • pp.56-67
    • /
    • 1991
  • 압출공정에서 발생하는 전달현상을 이해하기 위하여 싱글-스크류 압출기에서의 비 뉴톤성 유체의 비등온유동에 대한 수치해석을 위한 유한요서법(FEM)을 개발하였다. FEM 은 준-3차원 물리적 모델을 기본으로 하였고 온도분포해석을 위하여 전진방법을 도입하였 다. 본 연구에서 도입한 수치해석적 모델과 더 간단한 준-2차원 모델을 온도분포의 예측에 관하여 초점을 맞추어서 비교 하였다. 압출기의 내부채넬에서 순환유동이 온도분포에 미치 는 영향의 중요성이 강조되었다. 순환유동의 효과를 파악하기 위하여 유한 요소식에서 순환 과 관련된 대류항을 빼도록 유한요소 프로그램을 개조 하였고 개발된 원래의 프로그램과 개 조된 프로그램의 해석을 수행한후 해석결과 중에서 특히 온도분포에 있어서의 차이점을 비 교하였다. 이로부터 간단한 준-2차원 모델은 순환효과를 무시했기 때문에 속도분포의 예측 에서는 별문제가 없으나 온도분포의 예측에 있어서는 크게 잘못될 수 있음을 알수 있다.

  • PDF

A Study on the estimation of the flow characteristics and the bottom shear stress in an annular flume (환형수조의 내부 흐름특성 및 바닥전단응력 산정에 대한 연구)

  • Yang, Su-Hyun;Im, Ik-Tae;Hwang, Kyu-Nam
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.176-176
    • /
    • 2011
  • 환형수조는 점착성 퇴적물의 이송특성 연구를 위해 가장 선호되는 실험 장치로 알려져 있다. 과거 많은 연구자들은 퇴적물의 이송특성, 특히 침식/퇴적 특성 조사를 위해 주로 수로를 이용한 실험적 연구를 수행하였는데, 최초의 실험적 연구들은 주로 직선수조에서 수행되었다. 그러나 입자간의 응집이 중요한 역할을 하는 점착성 퇴적물의 경우에, 직선수조 끝단에서의 자유낙하 및 재순환 펌프의 날개에 의해 응집된 토사가 쉽게 분리될 수 있어 그 타당성이 의문시 되어 왔으며, 이러한 단점을 보완하기 위해 환형수조가 고안되었다. 환형수조는 수면과 접하여 회전하는 상부링의 마찰력에 의해 흐름이 생성되기 때문에 시간의 제약 없이 흐름조건을 동일하게 만들 수 있다는 큰 장점을 갖는다. 그러나 환형수조는 원주유속의 속도차이 및 원심력으로 인한 2차 순환류를 형성시켜 반경 방향(radial direction)에서의 바닥전단응력을 불균일하게 하는 단점을 갖는다. 이러한 2차 순환류와 바닥전단응력의 불균일을 저감시키기 위하여 환형수조의 몸체를 상부링의 회전 방향과 역방향으로 직접 회전시키는 방법이 채택되어져 왔다. 한편, 환형수조의 상부링과 몸체를 서로 역방향으로 동시에 회전시키는 양방향 회전(counter-rotation)의 적용을 위해서는 2차 순환류가 최소가 되며 바닥전단응력이 균일해지는 최적 회전속도비에 대한 분석은 필수적 사항이다. 이를 위하여, 상부링과 몸체의 회전속도에 따라 변화하는 수조내부의 흐름특성 및 평균바닥전단응력에 대한 연구가 선행되어야만 한다. 이에 본 연구에서는 전산유체역학을 이용하여 전북대에 설치된 환형수조의 상부링과 몸체의 회전속도에 따라 변화하는 수조내부에서의 흐름특성 및 바닥전단응력에 대한 분석이 수행되었다. 또한, 이를 기초로, 환형수조의 최적 회전속도비 산출을 위한 연구가 수행 중에 있다. 이러한 결과들은 추후 환형수조를 이용한 점착성 퇴적물의 침식/퇴적 등과 같은 이송특성 연구시, 퇴적물에 작용하는 흐름조건의 정밀산정을 위한 기초자료로 활용될 수 있을 것이다.

  • PDF

Evaluation of Kinetic Constant and Effect of Effluent Recycling in Wastewater Treatment from Fisheries Processing Plant using EMMC Process (EMMC공정을 이용한 수산물 가공공장 폐수처리에서 동력학적 인자 평가와 유출수반송의 영향)

  • Jeong, Byung-Gon
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.12 no.1
    • /
    • pp.1-8
    • /
    • 2009
  • EMMC(Entrapped Mixed Microbial Cell) process which is a kind of active cell immobilizing method was applied to treat fisheries processing wastewater biologically. Kinetic constants were calculated for organic and nitrogen removal and effect of effluent recycling on system performance was evaluated also. Yield coefficient, Y showed relatively low value compared with Y value obtained from conventional activated sludge process. It means that EMMC process can reduce amount of excess sludge significantly compared with conventional activated sludge process. Endogenous respiration coefficient $k_e$ of EMMC process also showed relatively low value compared with that of conventional activated sludge process. Yield coefficient Y, endogenous respiration coefficient $k_e$ and half saturation constant $k_s$ obtained from EMMC process in terms of nitrification were compared with reported value from literature based on suspended growth nitrification system. The value of Y obtained from this study has no difference compared with values obtained from literature review and $k_e$ of this study was low but $k_s$ of this study was high compared than values obtained from suspended growth nitrification system. To evaluate the effect of internal recycling on system performance, system was operated with internal recycling ratio of 1.5Q, 2.0Q, 2.5Q and 3.0Q. increase of internal recycling ratio effect more greatly on improvement of denitrification efficiency than that of nitrification efficiency. Accordingly, optimization of internal recycling ratio has to be based on improvement of anoxic reactor performance.

  • PDF

Efficiency Investigation of Vanishing Composting Machine Using Exhaust gas Recirculation system (배기가스순환시스템을 적용한 소멸 퇴비화장치의 효율검토)

  • Phae, Chae-Gun;Kim, Jong-Chan
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.7 no.2
    • /
    • pp.93-104
    • /
    • 1999
  • Existing composting system was improved to have a high performance for organic degradation, deodorization and energy reduction. Compared with conventional devices, this developed system uses the heat recovered from platinum catalytic tower by three times heat exchange in which 65% of exhaust gas was recirculated. Evaporation of water was made easy by maintaining negative pressure in entire system. It was possible for reaction to be maintained steadily by microorganism agent. The optimum mixing volume ratio of garbage to sawdust was 15:1 contrary to 20:1 in conventional one. Moreover, aerobic condition was maintained efficiently. Effects obtained by using a inner circulation system were as follows. It was possible to reduce the ammonia causing offensive odor and verified that consumption of electricity cut down to 1/3 with reduction of exhaust gas inflowing. According to this inner circulation, the optimum air flow was $0.44m^3$ to 100kg treatment capacity. The electricity consumption was changed in proportion to inflowing air volume.

  • PDF

Experimental Measurement of Hydrodynamics and CFD Simulation of Circulating Fluidized Bed for MTO Process (MTO 공정을 위한 상온 순환유동층 장치의 수력학적 특성의 측정 및 유동모사)

  • Lim, Jonghun;Lee, Donghyun;Park, Sangsoon;Chae, Hojeong;Jeong, Soonyong
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.163.1-163.1
    • /
    • 2010
  • MTO 공정을 개발하기 위한 순환유동층 장치에서 고체순환량을 높이기 위해 고체 주입량 및 상승관 유속에 따른 수력학적 특성의 파악에 관한 연구를 수행하였다. 전체 높이 2.6m 직경 0.009m의 상승관을 가진 순환유동층 장치에 대해 고체순환량을 조절하기 위한 비기계적 밸브로 각각 Seal-pot과 L-valve가 장착된 두 장치에 대해 고체순환량 및 체류량을 측정하였다. 고체순환량 및 체류량은 두 장치에서 모두 고체의 주입량이 증가함에 따라 증가하는 모습을 나타내었으며, 상승관의 유속에 따라서는 특정한 유속의 범위 내에서 증가하다가 일정 유속 이후 감소하는 모습을 나타내었다. Seal-pot을 사용한 장치에서는 고체순환량이 최대 $87kg/m^2.s$ 가량의 값을 나타내었으나 L-valve를 사용한 장치에서는 최대 $180kg/m^2.s$를 보였다. 이러한 실험 결과를 바탕으로 하여 전산유체역학을 이용한 순환유동층의 유동해석에 관한 연구를 실시하여 실험조건의 변화에 따른 상승관 내부의 수력학적 특성을 비교하였다.

  • PDF