• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.734-741
• /
• 2002

An experimental study was carried out for beam-column joints composed of RC column and RS beams. The purpose of this study is to examine the inelastic seismic behavior for the RC-RS connection. Two interior and one exterior beam-column assemblies with variable moment ratios were tested. Experimental results showed that strength and deformability except stiffness were satisfactory. It is considered that the lack of stiffness was due to the slipping of steel beam from RS beam. The behavioral characteristics of the RC-RS connection were evaluated according to the quideline suggested by Hawkins et al. Nominal strength at 5 ％ joint distortion was not satisfactory, but all the other requirements, such as strength preserving capability, energy dissipation, and initial stiffness and strength ratios after peak load were satisfactory compared with the guideline. Thus it was concluded that the RC-RS connections can maintain ductility with excellent energy-dissipating capacity if being provided with appropriate reinforced structural system such as RC core wall for the initial lateral stiffness.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.249-257
• /
• 2017

The purpose of this study was to contribute to the field application cost effectively and reasonably by developing the functional piles that make up for the defects of PHC piles. CFP (Concrete Filled Pretensioned Spun High Strength Concrete Pile with Ring type Composite shear connectors) piles developed in this study increases the compressive stress through enlarged cross section by rearranging composite shear connectors and filling the hollow part of PHC pile with concrete. And it improved shear and bending performance placing the rebar (H13-8ea) within the PHC pile and the hollow part of PHC pile of rebar (H19-8ea). In addition, the composite shear connectors were placed for the composite behavior between PHC pile and filled concrete. Placing Rebars (H13-8ea) of PHC pile into composite shear connector holes are sleeve-type mechanical coupling method that filling the concrete to the gap of the two members. Nonlinear finite element analyzes were performed to verify the performance of shear and bending moments and it deduced the spacing of the composite shear connectors. Through a various interpretation of CFP piles, it's proved that the CFP pile can increase the shear and bending stiffness of the PHC pile effectively. Therefore, this can be utilized usefully on the construction sites.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.10
• /
• pp.5-19
• /
• 2020

With increasing demand for offshore structures, the demand for temporary structures to help the offshore construction work has increased. A cofferdam is a temporary barrier to stop the inflow of water in the construction site and allows working in the dry condition when the construction is done within the water. However, it is a major cause of construction delays and increased costs because additional works are required to block the water inflow. Recently, in order to overcome the limitations of the conventional cofferdam methods and to increase economic efficiency, a large-diameter steel cofferdam method has been proposed which can be installed quickly in the seabed by using the suction pressure. In this circular steel cofferdam method, the top side of the cofferdam including the top-lid is always exposed above the sea level in order to use it as a water barrier, unlike the conventional suction bucket foundation. After installation, the top-lid of the cofferdam is removed and the water filled inside the cofferdam is discharged to make the interior dry condition. In this study, the circular steel cofferdam with a 5 m inner diameter was fabricated and the installation tests were conducted at the Saemaguem test site. During the experiment, variation of suction pressure, leakage between connections, structure deformation, and inclination of the steel cofferdam were measured and post-analyzed. This study verified the new circular steel cofferdam method and confirmed that the suction installation method can be successfully used for various purposes on offshore structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.295-302
• /
• 2011

Ubiquitous is an information communication environment which peoples could connect on network without being conscious of the network and computer condition at anytime and anywhere. Presently, advanced technology, digital cities and eco-friendly cities using Ubiquitous technology are being focused through out the world. As recent information industry and communication technology have developed remarkably, studies on intelligent structures and structural maintenance methods by combining a general idea of connecting all objects on network by interpolating computers which is called Ubiquitous Computing, and USN(Ubiquitous Sensor Network) are being attempted. In this paper, a basic experiment on penetration of RF(Radio Frequency) sensor nodes using an experimental sample setting concrete and reinforcing bar as variables is studied to estimate the possibility of applying wireless sensor networks in structures. The spring of reinforcing bars, concrete thickness, intensity of radio frequency were set up as variables, transmitting and receiving distance were checked vertically and horizontally. Moreover, Spectrum Analyzer was used for checking the magnitude of the frequency used in order to measure the reduction of radio wave exactly. The radio wave reduction was numerically analyzed, and the influence of the wavelength was analysed as well. As a result, the penetration depth in concrete without reinforcing bars was 45cm, and in reinforced concretes which reinforcing bars placed at spacing of 5cm and 15cm, the penetration depth were 37cm and 45cm each. No influence on radio wave penetration depth were found when the spacing of reinforcing bars in the reinforced concrete structures becomes over 15cm.

• The Journal of Society for e-Business Studies
• /
• v.20 no.3
• /
• pp.47-58
• /
• 2015

Recently, new information security vulnerabilities have proliferated with the convergence of information security environments and information and communication technology. Accordingly, new types of cybercrime are on the rise, and security breaches and other security-related incidents are increasing rapidly because of security problems like external cyberattacks, leakage by insiders, etc. These threats will continue to multiply as industry and technology converge. Thus, the main purpose of this paper is to design and present security subjects in order to train professional security management talent who can deal with the enhanced threat to information. To achieve this, the study first set key information security topics for business settings on the basis of an analysis of preceding studies and the results of a meeting of an expert committee. The information security curriculum taxonomy is developed with reference to an information security job taxonomy for domestic conditions in South Korea. The results of this study are expected to help train skilled security talent who can address new security threats in the future environment of industrial convergence.

• The Korean Journal of Malacology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 1993

한국의 담수에 광범위하게 서식하고 있으면서 역학적으로 중요한 역할을 하고 있는 두 종의 복족류 즉 쇠우렁이(Parafossarulus manchouricus)와 물달팽이(Radix auricularia coreana)의 소화기관 중에서 식도, 소화선 및 장에 대한 미세구조 관찰을 시도하였다. 이 부위들은 간흡충(간디스토마)과간질(소간디스토마)의 유생들이 그들의 생활사 중 거쳐가는 곳으로 알려진 소화관들이어서 이후 흡충류의 유충들이 위의 소화관에 주는 영향을 연구하는데 필요한 기초자료를 얻고자 수행된 것이었다. 관찰해 본 결과 다음과 같은 결론을 얻을 수 있었다. 식도의 상피조직은 두 종류에서 공히 원주세포와 원주섬모세포 및 점액분비 세포로 이루어져 있었다. 식도강상피 내에서도 어느 정도의 흡수와 소화가 이루어 지고 있음은 특이한 현상이라 하겠다. 소화선은 두 종에서 공히 복분지 관상선으로서 그 상피는 micovilli를 선강 또는 도관에 연한 유리표면에 가지고 있어 brush boredr을 이루고 있는 원주세포과 원주섬모세포로 구성되어 있었다. 이들 세포들의 내부 구조로 보아 소화세포와 배석세포로 구분할 수 있었다. 장의 상피는 원주세포와 원주섬모세포로 구성되어 있었으며 이들도 장강에 연한 유리표면에는 brush border를 이루고 있었다. 흡수와 분비기능이 활발한 것으로 사료된다. 전반적으로 보아 본 연구에서 관찰한 두 복족류의 소화관은 모든 부위에서 세포의 유리표면에 microvilli를 가지고 있어 물질의 흡수기능을 가지고 있음을 시사해주고 있었고, 이들 세포 중에는 때로 밀집한 cilia를 가지고 있어 소화관 내의 액체물질이나 이에 내포된 미세입자들의 유동을 도와주고 있음을 추측할 수 있었다.)은 결합조직으로 이루어진 근육질의 두꺼운 벽을 가지고 있었으며 내강은 돌출부위에 의해 4부분으로 갈라져 있었다. 내강에 연한 상피는 원주세포로 되어 있었다. 상음경(epiphallus)의 벽은 근섬유 다발은 벽의 외곽으로 갈수록 밀도가 높아졌다. 상부에 내강과 연결되는 함입구조(groove)를 가지며, 내강에 연한 상피는 섬모가 없는 원주세포로 이루어져 있었다. 음경(penis)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.555-562
• /
• 2022

This study measured and analyzed the propagation characteristics at frequencies 6, 10, and 17 GHz to discover the new propagation demands in a semi-basement indoor corridor environment for meeting the 4th industrial revolution requirements. The measured indoor environment is a straight corridor consisting of three lecture rooms and glass windows on the outside. The measurement scenario development and measurement system were constructed to match this environment. The transmitting antenna was fixed, and the frequency domain and time domain propagation characteristics were measured and analyzed in the line-of-sight environment based on the distance of the receiving antenna location. In the frequency domain, reliability was determined by the parameters of the floating intercept (FI) path loss model and an R-squared value of 0.5 or more. In the time domain, the root mean square (RMS) delay spread and the cumulative probability of K-factor were used to determine that 6 GHz had high propagation power and 17 GHz had low propagation power. These research results will be effective in providing ultra-connection and ultra-delay artificial intelligence services for WIFI 6, 5G, and future systems in a semi-basement indoor corridor environment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.97-106
• /
• 2023

In this study, we would like to study the stabilization of the high content of ceramide formulation by containing cyclodextrin. Ceramide, which constitutes the intercellular lipid, a human skin barrier, is a very important ingredient in moisturizing maintenance by protecting moisture in the skin and strengthening the skin barrier. However, since ceramide is poorly soluble, even if it is included in the cosmetic formulation, it has a problem that it is slowly gelled or crystallized and deposited over time, making it difficult to containing a high amount of ceramide. Cyclodextrin is a cyclic oligosaccharide connected with glucose molecules and has a cylindrical structure with hydrophilic outer surface and hydrophobic inner surface, which is known to improve the physicochemical properties of drugs such as improving solubility and absorption of poorly soluble drugs. We demonstrated the stability of the formulation containing high amount of ceramide by measuring hardness and observing emulsion drops with polarized microscope. This study also demonstrated that the high-content ceramide formulation containing cyclodextrin has the effect of preventing gelation or crystallization of ceramide, thus having excellent environmental conditions stability and skin moisturization.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.41-50
• /
• 2008

The histochemical characteristics and ultrastructure of the mantle in the spiny top shell, Batillus cornutus were described using light and electron microscopy. The simple epidermal layer wrapped on the top and bottom of the centrally located connective tissue. And then the epidermal layer were divided into the outer epidermal layer near a shell and the inner epidermal layer closed to the visceral mass. The connective tissue layer was composed of the collagen fiber muscularfiber bundle and hemolymph sinus. Mucous cells in the apical mantle contained acid and neutral mucopolysaccaride, and acidic carboxylated mucopolysaccaride in the mid and marginal mantle. The mantle thickness, epidermal layer thickness and hemolymph sinus area displayed a trend of reduction from the marginal zone to the apical zone. From TEM observation, it was possible to distinguish epithelium, ciliated cell, absorptive cell and secretory cell in the epidermal layer. The epithelia were columnar and the nucleus was elliptical. The free surface were covered with microvilli. The lateral membranes of epithelium was con nected with neighboring cells by the zonular occludens, zonular adherens and membrane interdigitation. Ciliated cell on free surface had cilia and microvilli, and numerous mitochondria in the apical cytoplasm. In the epidermal layer, it observed 2 type cells having absorptive function. The absorptive cells were columnar in shape, and contained microvilli, pinocytotic vesicles, mitochondria and lysosomes of various electron density. Secretory cells can be divided into four types (A, B, C, D) depending on the cell shape and characteristics of secretory granules. These cells were unicellular glands and had similar characteristics to previously reported on the mantle of the gastropod and bivalves.