• Computational Structural Engineering
• /
• 제5권4호
• /
• pp.93-102
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analyses. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made, Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. The shroud modal testing was performed on the low frequency global survey to measure the first several modes. The analysis using the finite element model was also performed for the as-tested conditions. The natural frequencies and mode shapes from both test and analysis have been acquired and compared to be in good agreement. It is concluded that finite element model generated is good enough to be used in the design for the dynamic response analysis under various loading conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제20권6호
• /
• pp.1136-1141
• /
• 2016

IoT technology has been used as a core technology of convergence service that needs intelligent information processing, and the importance is largely emerging now. And internal network construction thru IoT interaction device can connect with IoT device effectively, provide diverse services by connection with open platform. Especially, beacon that is based on low electric power bluetooth device is receiving attention as one of core technology of IoT. Beacon technology is utilized widly in various fields of industry, and there are lot of demands in the specific environment and conditions beyond the basic function. On this thesis, the authors are proposing the beacon device that utilized acceleration sensor and hole sensor. this beacon device can control the target on specific situation thru sensing of moving target. For the more, we will expect to apply to the various type of factory environments like detachable installation, optimized management using sensor.

• Journal of the Korea Society of Computer and Information
• /
• 제20권3호
• /
• pp.29-45
• /
• 2015

This paper proposes an implementation of SPARQL-DL, which is a query language for OWL ontologies, for query-answering over the OWL ontologies virtually generated from existing RDBs. The proposed SPARQL-DL processor internally translates input SPARQL-DL queries into SQL queries and then executes the translated queries. There are two advantages in the query processing method. First, another repository to store OWL ontologies generated from RDBs is not required. Second, a large ABox generated from an RDB instance is able to be served without using Tableau algorithm based reasoners which have a problem in large ABox reasoning. Our algorithm for query rewriting is designed to create one corresponding SQL query from one input SPARQL-DL query to minimize the overhead by establishing connections with RDBs.

• Korean Journal of Optics and Photonics
• /
• 제19권2호
• /
• pp.122-126
• /
• 2008

Dual backlight unit incorporating a single light source integrated with a beam splitting reflector was demonstrated, providing a surface light beam for both the keypad and the display section simultaneously. The reflector was realized by aligning a groove substrate with a matching cover, and a light guiding module comprising a stack of light guide panels and prism/diffuser sheets was attached to both sides of the reflector. A light emanating from the light source-placed in the middle of the substrate-undergoes a series of reflections through the reflector to reach the input of the light guiding module. Then it is transformed into a surface light beam, which is used to irradiate the keypad and display sections simultaneously. As for the accomplished dual surface light sources, the measured average luminance and the spatial luminance uniformity were respectively about $420\;cd/m^2$ and 69% for the keypad section, and $640\;cd/m^2$ and 79% for the display section.

• Korean Journal of Ichthyology
• /
• 제11권2호
• /
• pp.126-133
• /
• 1999

Ultrastructure of the zona radiata and the micropyle of ripe eggs in the rainbow trout (Oncorhynchus mykiss), catfish (Silurus asotus) and loach (Misgurnus anguillicaudatus) were examined by light, scanning and transmission microscopes. The egg micropyle of rainbow trout and catfish consists of a funnel-shaped vestibule and a tapered canal transversing the zona radiata. The micropyle of rainbow trout and catfish showed the similar structure with flat pit and long canal. The micropylar wall showed the clockwise spiral structure in rainbow trout. The micropyle of the loach showed the type with a hollow pit leading into a short canal and the micropylar wall showed the counterclockwise spiral structure. There are numerous and various size pores at the surface area around the opening in every experimented fish. Interconnecting ridges were observed in the unfertilized eggs of every fish.

• Congress of the korean instutite of fire investigation
• /
• 한국화재조사학회 2011년도 제20회 추계학술대회
• /
• pp.63-79
• /
• 2010

It is found to the arc trace on the junction termination of 345kV cable. According to the analysis of the cable material is judged to be good. Manufacturing and design problems are not considered. In construction defects, it was estimated to the low level of insulation oil. In the majority of the arc trace appeared XLPE is found. However, there is no Soots mark, yellow band has not been confirmed, not associated with a radial arc of the spider leg is not evidence. In other opinions, void, contamination or jut are not found on the inside of XLPE. Thus, by the attachment of the impurities in surface of XLPE insulation is judged to the breakdown.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.137-140
• /
• 2008

Minimizing the girder number and appling the long span deck of plate girder bridge is the main factors in the practical and economic design of the Twin Steel Girder Bridge. Therefore, it is important to verify the ability of the long span concrete deck. In this paper, to improve the problem, the precast concrete full depth deck has been used instead of cast-in-place concrete deck. The precast concrete full depth deck having longitudinal and transverse prestress is efficient to design of the long span concrete slabs. This paper introduces the design concept of Twin Steel Bridge using the precast concrete full depth deck and applied design case.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제6권1호
• /
• pp.34-42
• /
• 2001

A battery is the device that transforms the chemical energy into the direct-current electrical energy directly without a mechanical process. Unit cells are connected in series to obtain the required voltage, while being connected in parallel to organize capacity for load current and to decrease the internal resistance for corresponding the sudden shift of the load current. Because the voltage droop down in one set of battery is faster than in tow one, it amy result in the low efficiency of power converter with the voltage drop and cause the system shutdown. However, when the system being driven in parallel, a circular-current can be generated. The changing current differs in each set of battery because the system including batteries, rectifiers and loads is connected in parallel and it makes the charge voltage constant. It is shown that, as a result the new batteries are heated by over-charge and over-discharge, and the over charge current increases rust of the positive grid and consequently shortens the lifetime of the new batteries. The difference between the new batteries and old ones is the amount of internal resistance. In this paper, we can detect the unbalance current using the micro-processor and achieve the balance current by adjusting resistance of each set. The internal resistance of each set becomes constant and the current of charge and discharge comes to be balanced by inserting the external resistance into the system and calculating the change of internal resistance.

• The Korean Journal of Malacology
• /
• 제26권2호
• /
• pp.165-170
• /
• 2010

The location of the style sac and morphology of the crystalline style were described morphologically in three bivalve species (Tegillarca granosa, Mytilus galloprovincialis and Saxidomus purpuratus) which inhabited in different area. The style sac of them was connected to the posterior stomach. There was the crystalline style in the style sac. The crystalline style of three species was long circular cone of translucent gelatin form, which was hard and elastic. There was a red-yellow and spiral filament inside the crystalline style of Tegillarca granosa and Mytilus galloprovincialis. A white and long tube was located from basal portion to the end of crystalline style in Saxidomus purpuratus. RLC (relative length of crystalline style) of Tegillarca granosa, Mytilus galloprovincialis and Saxidomus purpuratus was 47.69, 48.97, 64.20% and RWC (relative weight of crystalline style) was 0.54, 0.54, 0.39%, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제14권3호
• /
• pp.467-474
• /
• 2019

In this paper, we studied a method for a broadband stacked patch antenna structure which is widely used for bandwidth improvement. The characteristics according to the distance between the two patches were analyzed and the impedance matching was optimized by connecting parallel open stubs to the main patch feed line. The shunt matching stub is inserted underneath the parasitic patch and so it does not require additional space, which enables the proposed antenna structure to be advantageous in miniaturizing antenna. The effects of the various parameters on the antenna performance are examined, and we introduced the design procedure for the proposed antenna to operate in the frequency range of 2.3~2.7GHz. Experimental results show that the bandwidth of the proposed antenna is about 480MHz with 2.27~2.75GHz bandwidth. And the antenna gain was 5.8dBi at 2.3GHz and 7.8dBi at 2.6GHz within the bandwidth.