• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.46-54
• /
• 2007

We have fabricated and characterized MMI (Multimode Interference) coupled ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for the integration of the WDM (Wavelength Division Multiplexing) system. The TIR (Total Internal Reflection) mirrors were fabricated by self-aligned process and had losses of about 0.71 dB per mirror. Coupling in and out of a resonator was achieved using the extremely small MMI couplers. The MMI length and width used in the experiment were $119{\mu}m$ and $9{\mu}m$, respectively. The resulting FSR (Free Spectral Range) and on-off ratio were approximately 1.333 nm (162 GHz) and 13 dB, respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.44-49
• /
• 2012

The indirect-contact ECG measurement is a newly developed method for unconstrained and nonconscious measurement in daily Life. This study is the first step to reducing the large background noise appearing in indirect-contact ECG. This study built the thermal noise model of capacitively coupled active electrode which is used in indirect-contact ECG. The results show that the level of thermal noise estimated by the thermal noise model is much the same as that of actual background noise for the capacitively coupled active electrode alone. By applying the actual electrical properties of a sample cotton cloth to the thermal noise model, the theoretical level of thermal noise in the indirect-contact ECG was estimated. The results also show that the level of op-amp's intrinsic noise is so small that it can be negligible in comparison with thermal noise of resistors. The relationship between the level of thermal noise and the resistance of the bias resistor was derived, and it is the base for the further study how to choice the optimal resistance for the bias resistor.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.119-126
• /
• 2008

In this paper, the loop coupling model for the analysis of end launcher rectangular waveguide adapter are proposed. The formula of input impedance from this model are presented. The influence of propagation mode and higher modes in rectangular waveguide are analyzed and design parameters of the end launcher adapter are investigated. The computational results between the proposed theoretical analysis and the previous papers are compared and are verified by HFSS. The end launcher rectangular waveguide adapter consists of the coupling geometry which is connected the inner conductor of $50{\Omega}$ coaxial line through into the 17.6mm feeding loop in a WR90 commercial waveguide, and the VSWR is maximum 2.0 over operating frequency from 7.5GHz to 10.6GHz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.66-66
• /
• 2010

$SnO_2$ 나노선은 n-type 반도체 특성을 띄며 트랜지스터, 가스 센서, pH 센서 등 여러 분야에 걸쳐 다양하게 사용되고 있다. $SnO_2$ 나노선은 그 자체만으로 시계방향의 전기적 히스테리시스를 보이며 이것은 나노선 표면에 흡착된 물이나 산소가 발생시키는 전자 갇힘 현상이 가장 큰 원인으로 작용한다. 특히 고분자를 게이트 절연막으로 사용할 경우 게이트 절연막의 전기적 히스테리시스가 소자 특성에 영향을 미치게 되며, 고분자 절연막의 히스테리시스는 $SnO_2$ 나노선의 히스테리시스와 반대인 반시계 방향의 특성을 보인다. 고분자 내에서 발생하는 히스테리시스는 고분자 사이에 흡착된 물 분자나 고분자의 높은 극성을 가지는 작용기 등이 원인으로 작용한다. 전기적 히스테리시스는 FET소자를 구동하는데 있어 부적절한 특성으로, 이것의 원인을 이해하는 것은 중요하며 히스테리시스의 방향과 크기를 조절할 수 있는 기술 또한 중요하다. 본 연구에서는 폴리이미드(PMDA-ODA)를 게이트 절연막으로 사용하여 플렉시블 기판을 만들고 그 위에 $SnO_2$ 나노선을 슬라이딩 전이 방식으로 정렬하여 플렉시블 FET를 제작하였다. 제작된 소자는 $0.7cm\;{\times}\;0.7cm$ 넓이 안에 300개의 FET가 존재하며 SEM 이미지를 통해 넓이 $50{\mu}m$, 길이 $5{\mu}m$의 FET채널에 약 150개의 나노선이 연결되어 있는 것을 확인했다. 이 소자의 히스테리시스는 폴리이미드의 교차결합 정도에 따라, 그리고 폴리이미드 절연막을 제작할 때의 습도에 따라 변하게 된다. 교차결합이 많아지고 습도가 낮아질수록 폴리이미드 절연막 내부에 흡착되는 물분자가 줄어들게 되고 절연막의 히스테리시스가 사라지며 시계방향의 나노선 히스테리시스가 지배적이 된다. 반대로 교차결합이 줄어들고 습도가 높아질수록 폴리이미드 절연막 내부에 물분자가 늘어 나면서 시계반대방향의 폴리이미드 히스테리시스가 FET의 전기적 특성에서 눈에 띄게 나타난다. 이 실험을 통해 고분자 절연막을 사용한 $SnO_2$ 나노선 FET의 전기적 히스테리시스를 조절할 수 있었으며, 소자의 히스테리시스를 없앨 수 있는 가능성에 대해서 논하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.360-370
• /
• 2015

In case that an infinite length waveguide structure is connected with a finite length structure, it is required to combine a wave approach for the waveguide structure and a modal approach for the finite length structure to investigate the dynamic response of the connected target structure. In this study, the wavenumber finite element (WFE) analysis is adopted for the infinite length waveguide substructure and a finite element (FE) method is applied for the finite length substructure and then their results are coupled in terms of the impedance or mobility at the connected points between the substructures. As a structural model, an infinite length cylindrical shell with a rectangular plate inside is regarded. These two substructures are connected at the four corner points of the plate, rigidly or resiliently. From this investigation, it was confirmed that the wave approach (WFE method) and modal approach (FE method) can be combined by the impedance coupling.

• Korean Journal of Cognitive Science
• /
• v.21 no.1
• /
• pp.199-231
• /
• 2010

This study tried to contrast the relation-based and the dimension-based explanations and to suggest its implications on the noun-noun conceptual combination. In experiment 1, we investigated whether the dimension-based approach and intra-conceptual explanation can explain both thematic relational and property interpretations of conceptual combinations based upon the intrinsic and extrinsic features of constituent concepts. We defined intrinsic(or extrinsic) concepts according to the degree of dependency on intrinsic(or extrinsic) features. Property interpretation was facilitated when modifiers were the intrinsic concepts. This result implies that processing of conceptual combination can be influenced by the structures and information of constituent concepts. In experiment 2, exocentricity of the concepts used in Gagne(2000) was examined to reanalyze her data according to the dimension-based approach. The exocentricity was higher when the concepts were combined by their relational connections. Results of experiment 1 and 2 suggest the possibility that both approaches can be integrated through the diversities of information involved during interpreting conceptual combination. Implications and future directions of this study were discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.186-186
• /
• 2013

종래의 흑연 위주 연료전지 분리판 개발되어 최근 고분자 전해질 막 연료전지가 높은 전력, 낮은 배기 가스 배출, 낮은 작동 온도로 자동차 산업에서 상당한 주목을 받고 있다. 요구사항은 높은 전기 전도도, 높은 내식성, 낮은 가스 투과성, 낮은 무게, 쉬운 가공, 낮은 제조비용이다. Thin film Cr 장비로 저항가열 furnace, sputter 등이 사용된다. 연료전지 분리판의 고전도도, 내부식성 보호막의 고속 증착을 위한 새로운 증착원으로 스퍼터 - 승화형 소스의 가능성을 유도 결합 플라즈마에 금속 봉을 직류 바이어스 함으로써 시도하였다. 유도 결합 플라즈마를 이용하여 승화증착 시스템을 사용하여 OES (SQ-2000)와 QMS (CPM-300)를 사용하여 $N_2$ flow에 따른 유도 결합 플라즈마를 이용한 스퍼터-승화증착 시스템을 사용 하여도 균일한 공정을 하는 것을 확인 하였다. 5 mTorr의 Ar 유도 결합 플라즈마를 2.4 MHz, 500 W로 유지하면서 직류 바이어스 전력을 30 W (900 V, 0.02 A) 인가하고, $N_2$의 유량을 0.5, 1.0, 1.5 SCCM로 변화를 주어 특성을 분석하였다. MID (Multiple Ion Detection) mode에서 유도결합 플라즈마를 이용한 스퍼터-승화 증착 장비를 사용하여 CrN thin flim 성장시켰고, deposition rate은 44.8 nm/min으로 얻을 수 있었다. 또한 $N_2$의 유량이 증가할 수록 bias voltage가 증가하는 것을 확인 할 수 있었다. OES time acquisition을 이용한 공정 분석에서는 $N_2$ 유량을 off 하였을 때 Ar, Cr의 중성 intensity peak이 상승하였고, 시간 경과에 따라 sublimation에 의한 영향이 없는 것을 확인 할 수가 있었다. XRD data에서는 질소 유량이 증가함에 따라 $Cr_2N$이 감소하고, CrN이 증가하는 것을 확인할 수가 있었다. 결정배향성과 Morphology는 다결정 재료의 경도에 영향을 주는 인자이다. CrN 결정 구조의 경우는 (200)면이 경도가 제일 높은데 (200)면에서 성장한 것을 확인 할 수 있었다. 잔류가스 분석 결과로는 일정한 Ar의 유량을 흘렸을 때 $N_2$의 변화량이 비례적인 경향이 보이는 것을 확인 할수 있었다. 또한 $N_2$가 흐르면서도 유도 결합 플라즈마를 이용한 스퍼터-승화 증착 시스템을 사용하면 일정한 공정을 하는 것을 확인 할 수 있었다. 질소의 분압이 유량에 따라서 $3.0{\times}10^{-10}$ Torr에서 $1.65{\times}10^{-9} $Torr까지 일정한 비율로 증가한다. 즉, 이 시스템으로 양산장비 설계를 하여도 가능 하다는 것을 말해준다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.2
• /
• pp.198-208
• /
• 1995

Combining Iwan-Blevin's model into the approximated form of the nonlinear model derived for the dynamic analysis of the riser system with the inclusion of internal flow, current-vortex model is developed to investigate the effect of internal flow on vortex-induced vibration due to inline current The riser system includes a steadly flow inside the pipe which is modeled as an extensible or inextensible tubular beam. Galerkin's finite element approximation are implemented to derive the matrix equation of equilibrium for the finite element system. The investigations of the effect of internal flow on vibration due to inline current are performed according to the change of various parameters such as top tension, infernal flow velocity. current velocity, and so on. It is found that the effect of internal flow on vibration due to vortex shedding can be controlled by the increase of top tension. However, careful consideration has to be given, in design point in order to avoid the resonance band occurding near vortex shedding frequency, particularly for the long riser.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.30-42
• /
• 2010

The effects of internal waves on dynamics of hypoxic waters were investigated by numerical simulation by means of a hydrostatic-ecosystem coupled numerical model for Lake Biwa. The numerical model consists of hydrostatic and ecosystem submodels. Numerical simulation was carried out for a period during April 2007 and March 2008, after preliminary numerical simulation for three years. As a result, the numerical model could capture the vertical profiles of the observed water quality. During September 30 and October 21 in 2007, the major internal waves were Kelvin and Poincare waves, the periods of which were 1.63 or 1.77 days and 0.48 days, respectively. Hypoxic waters appeared in bottom boundary layer around October and were still when thermocline locates in upper layer. During late autumn and winter seasons, differences in density between upper and lower layers were reduced and the amplitude of internal waves increased. Hypoxic waters began to move under the effects of internal waves. Movement of hypoxic waters will diminish the habitat for aquatic organisms in deeper waters.