• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.176-179
• /
• 2011

국내에서는 방화구획을 설정하여 화재 확산 방지 및 재실자의 대피 시간을 확보하고 있다. 방화구획에 설치되는 방화문은 방화문의 내화시험방법(KS F 2268-1)에 따라 시험을 거쳐 성적서를 발급 받은 제품에 대해 설치하도록 의무화 하고 있다. 그러나 본 시험방법은 시험체 제작, 설치 및 의뢰시험비용 등 상당한 비용이 소요될 뿐 아니라 제작, 설치, 시험에 소요되는 시간 또한 길다. 축소실험장치는 목재방화문 개발 중 재료의 내화성능을 평가할 장치로 개발되었으며, 표준시간-가열 온도곡선을 상회하는 가열실험을 통해 재료의 내화성능 결과를 얻을 수 있다. 본 실험에서는 난연 또는 불연성능이 뛰어난 재료를 대상으로 실험하였으며, 그 결과 난연목재는 5분, 마그네슘보드와 내화 직물원단은 60분의 내화성능을 갖춘 것으로 확인되었다. 이 결과를 토대로 방화문의 내화시험방법과 상관성을 도출하여 목재방화문 개발의 지표로 활용 가능하게 되었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.79-80
• /
• 2013

내장재의 화재위험성은 착화성, 난연성, 표면의 화염확산 및 방출열량, 방출 연기량 둥 다양한 기준으로 기술될 수 있으며 나라마다 시험방법과 기준이 상이함, 본 연구에서는 화염확산성의 관점에서 내장재의 화재위험성을 가름할 지표도출을 고찰하였음.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.193-199
• /
• 2002

The dichloro-polyester polyol (DCBAO) which was synthesized in our earlier work was cured at room temperature with two different type of curing agents including Desmodur N-3300 and Desmodur L-75 to get a polyurethane flame-retardant coatings (DCBAO/N-3300=DEBAN and DCBAO/L-75=DCBAL). We could not observe any deterioration of physical properties of the flame-retardant PU coatings (UCBAN and DCBAL) in comparison with the conventional PU coatings. Thermal resistance of DCBAL-type flame-retardant coatings, which was measured by yellowness index difference, was inferior to that of DCBAL-type PU coatings. We believe that this phenomena is attributed to the poor thermal resistance of Desmodur L-75 isocyanate. It was observed that the LOI values were 25∼26% for the PU coatings containing 20∼30 wt% of 2,4-dichlorobenzoic acid.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.79-84
• /
• 2012

Combustion characteristics of outdoor advertisement materials were evaluated for fire risk assessment about fire expanding. At this study, the flame retardancy and the limiting oxygen index (LOI) was measured by UL 94 and ASTM D 2863 respectively. At the result of flame retardancy, foamex was V-0 grade and those of others were out of grade. LOI measurement showed that the LOI of foamex was highest in the samples. The cone calorimeter test was done by ISO 5660-1 to find the combustion characteristics. The cone calorimeter test showed that the outdoor advertisement materials were not good to prevent of fire expanding. The time to ignition (TTI) of flex was the fastest and the peak heat release rate (PHRR) as well as the total heat release (THR) of acrylic panel was higher than those of others.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.93-95
• /
• 2005

건식변압기는 난연성 변압기로서 옥내나 선박과 같은 화재의 위험성이 있는 곳에 주로 사용된다. 본 연구에서는 삼상 건식변압기의 온도분포특성을 설명하였다. 부하율에 따라 온도분포특성시험을 실시하였으며, 온도센서와 열화상카메라를 이용하여 변압기의 온도를 측정하였다. 분석결과 온도는 두 권선이 인접한 곳에서 가장 크게 나타났다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.99-107
• /
• 1998

This dissertationhas confirmed the non-flam mability of cast mold transformer that is increasingly used lately. As a research progress, the investigation has been performed on the installation status and each line of the subway system which have the most mold transformer accidents, and the impediment status of the transformer for rectifier and the high-voltage distribution transformer per each manufacturer. Then, a high voltage mold of the actual mold transformer has been installed in the horiwntal heating furnace and the heat has been applied by the standard heating temperature curve of KSF 2257(Fireproof testing meth od of the construction structures: 1993). Accordingly, the combustibility of the mold transformer based on the test results has been found that 78 minutes has been required for the complete burning per the KSF 2257 combustion test curve and that, after stopping the heat application of the horizontal furnace after ignition, the flame progress has not been made but shown as the self-extinguishing characteristics when the flame progress has been checked. Thus, the non-flammability and self-extinguishability of the mold transformer have been confirmed. The result of this dissertation has indicated that the accident involving mold transformer has been progressed and expanded by the dielectric breakdown or void due to the crack in the mold rather than a fire accident caused by a short-circuit or an overload.r an overload.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.653-659
• /
• 2018

High-rise buildings and complex facilities are a representative urban system for the masses, and it requires an increasing role of commodity and safety. Smoke and toxic gasses can cause accidents due to fire in these systems. The purpose of this study is to develop a fiber screen material for emergency evacuation passages that can be avoided quickly and safely in cases of disasters. The fiber screen material is applicable to folding devices for emergency evacuation passages. The material is different from general steel material in that it is lightweight with less burden during storage for a long time in a roll form in a folding device. It also has an excellent secondary function in that it is less affected by radiant heat. Three kinds of fiber screen materials were selected that have good flame retardancy and post-processing characteristics. A performance evaluation was performed by a heat shrinkage test, contact heat test, combustibility test, flame retardancy test, tensile strength test, and tear strength test. As a result, the lightweight fabric shows excellent performance through post-processing, and silicone resin coating can secure safety of the pizza by the fiber screen material performance and radiant heat. The optimum post-treatment conditions were evaluated by performing a burning test after coating two kinds of glass fibers and four types of flame-retardant silicone resins with different weight and thickness.

• Composites Research
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2017

Eco-convivial composites with improved properties are essential to present polymer scenario and can be made easily by replacing partially/completely renewable materials either matrix or reinforcement along with few % of additives. In these investigations, Abaca fabric have been used as reinforcement for manufacturing of Vinyl ester composites through VARTM technique and study the effect of alkali surface treatment of abaca fabric and flame retardant additives i.e., ammonium polyphosphate (APP) with halloysite nano-clay (HNT) on mechanical and flame retardant properties. The results concluded that, surface treatment deceased the hydrophilic nature of fabric and enhanced the interfacial bonding with hydrophobic matrix and eventually increased mechanical properties slightly of developed composites. Similarly, the flame retardancy of the composites improved significantly and increases the burning time by varying the wt% of filler concentration.

• Composites Research
• /
• v.14 no.6
• /
• pp.1-8
• /
• 2001

In this paper, the sandwich panel composites consisting of core material and face sheet were studied to evaluate the mechanical properties, noise level and fire resistance including flammability, smoke, and toxicity. Four types of sandwich panel were prepared using various kinds of panel and honeycomb materials. It was observed that Al honeycomb/Al skin composite materials had the excellent flatwise tensile strength and edgewise compressive strength compared with other types of composites. The flatwise compressive strength and flexural strength of Nomex honeycomb/Al skin composite were higher than those of other composites. PMI form/Al skin composite showed the higher core shear strength and facing bending strength. From the experimental results of flame resistance tests, it can be said that the phenol based skin composite has the excellent flame retardation properties, which are similar to those of the commercial skin composites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.75-75
• /
• 2010

기존 할로겐프리 제품은 PVC와 비교하여 유연성이 크게 떨어져 PVC 사용에 대한 규제가 강화되고 있음에도 불구하고, 이를 쉽게 대체하기 곤란하다는 문제점이 있다. 이에 할로겐프리 재료만 사용하여 고난연성, 예를 들면 UL 1581 에 따른 VW-1 규정을 충족하는 고난연성을 가지면서도 경도가 낮아(경도 70수준, Shore A) 재질의 유연성이 확보된 고분자 재료를 개발하는 것이 요구된다. 실험 결과로부터 인장강도 11[Mpa], 신장율 720[%], 가열후 인장강도 잔율 90[%], 가열후 신장잔율 88[%], 산소지수 38.0, 수직난연시험 합격, 경도(Shore A) 70, 백화현상이 나타나지 않는 등 우수한 특성을 보였다.