• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.335-341
• /
• 2002

The physical properties and the dyeability of the nylon S fibers Prepared by high speed spinning according to godet roller draw ratio form 1.1 to 1.6 were investigated. The strains of nylon 6 fibers were decreased against the increase of the godet roller draw ratio. The stresses of nylon 6 fibers were increased with the increase of the godet roller draw ratio. Birefringences, densities and crystallinities of the nylon 6 fibers were increased with the increase of godet roller draw ratio In DSC diagrams, the $\gamma$ form of crystal became dominant at higher godet roller draw ratio. The dye uptakes of C. 1. Acid Blue 113 on the fibers were decreased against the increase of godet roller draw ratio.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.121-130
• /
• 1998

In recent years, a number of metal machine parts, in the field of the car manufactures and electronic goods for home, have been replaced by nylon-6 in order to weight, cost, and a period of process of manufacture. It's because nylon-6 materials as an industrial material have higher economical and productive advantage than the metalic ones. However, in domestic injection manufactures, there are few data on fiber glass synthetic on nylon-6. It is said that plastic in process of manufacture using the same injection materials make their results different in large scale according to fiber glass synthetic rate conditions. In this study, we have studied effects of the glass fiber synthetic rate on the characteristics of fatigue failure for nylon-6.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.529-534
• /
• 2014

전개형 우주 구조물의 구속 및 분리를 위해 일반적으로 적용되는 폭발식 분리장치의 경우, 극초소형 위성으로 분류되는 큐브위성에는 적용불가가 설계요구조건으로 규정되어있다. 큐브위성의 제한된 장착 공간과 이로 인한 저충격 요구조건, 저가의 개발비 등의 요구조건으로부터 일반적으로 적용이 용이한 나일론선 열선절단방식이 적용되고 있다. 하지만 나일론선 적용에 따른 낮은 체결력과 복수 구조물의 구속/분리를 위해 복수의 체결부와 열선을 필요로 하는 등 시스템 복잡화 및 신뢰도 저하의 문제점이 존재한다. 본 연구에서는 상기의 문제점 해결을 위해 힌지 구동형 분리너트를 적용한 구속분리장치를 제안하였으며, 인증시험 온도범위에서의 분리장치 동작 기능시험, 정하중 시험, 충격레벨 측정시험을 통해 설계의 유효성을 입증하였다.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.437-443
• /
• 2013

This paper investigates the physical properties of aramid and aramid/nylon hybrid air jet textured filaments for protective garments relative to ATY nozzle diameters. Three types of para-aramids(840d, 1,000d, 1,500d) and nylon(420d) filaments were prepared; in addition, 840d aramid/420d nylon and three kinds of aramid filaments were texturized with a variation of air jet nozzle diameters(0.6, 0.75, 1 and 1.2 mm) on the AIKI air jet texturing machine. The measured physical properties of 16 specimens are as follows. The linear densities of aramid and aramid/nylon hybrid ATY increased with a larger nozzle diameter. The tenacity and initial modulus of aramid and hybrid ATY linearly decreased with a larger nozzle diameter; in addition, the breaking strain increased with the nozzle diameter. The dry and wet thermal shrinkage of hybrid ATY increased with a larger nozzle diameter from 0.6 mm to 1 mm and then decreased at a nozzle diameter of 1.2 mm (which seems to be a critical diameter). The wet and dry thermal shrinkage of aramid/nylon hybrid ATY are influenced by the nylon part of the hybrid yarns because the wet and dry thermal shrinkages of aramid ATY are less than 0.2%. The instabilities of aramid and aramid/nylon hybrid ATY were not influenced by the air jet nozzle diameter; however, they increased with the linear density of ATY.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.319-327
• /
• 2002

Nylon 6 ultramicrofiber(UMF, monodenier 0.074d) and regular staple fiber(monodenier 2.05d) were dyed with acid and disperse dyes to investigate the effect of the difference of the fiber fineness. Also X-ray diffraction pattern, birefringence, DSC thermogram, moisture regain and water absorption of these fibers are measured. The dyeing rate of nylon UMF with acid dyes is increased compared with that of regular fiber, but not increased for disperse dyes. Also the saturation dye uptake of UMF with acid dyes is higher than that of regular fiber, while it is unchanged for disperse dyes. The moisture regain of UMF is similar to the regular fiber, whereas the water absorption of UMF is two times th그n that of the regular fiber. The crystallinity percentage of UMF is higher than that of regular fiber.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.328-334
• /
• 2002

Nylon 6 staple ultramicrofiber(UMF, 0.074) and regular staple fiber (Regular, 2.0d) were annealed at In, 130, 160 and $180^\circ{C}$ under tension free for 10 min and U min. The treated fibers were dyed with Acid Red 18 and Blue n3. They were adjusted at PH 5.0 of dye bath in buffer solution of $CH_3COOH/CH_3/COONa(0.1mo1/1)$. Liquor ratio was kept at 1000:1. Dyeing rate of UMF annealed at $100^\circ{C}$ was decreased, but was increased for regular nylon. Also dye equilibrium of UMF at $100^\circ{C}$ was increased for Acid Red 18, but was decreased for Acid Blue 83. The intensities of X-ray diffraction peaks of UMF increased with increasing annealing temperature. Also the crystallinity of heat-sotted fibers by DSC thermogram was well agreed with the tendency of density Amino end group, moisture regain and water absorbency were decreased with increasing annealing temperature.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.662-669
• /
• 2006

The pneumatic muscle actuator consists of an air bellows tube with two end-flanges. The air bellows tube is made from rubber layers and flexible sheathing formed from nylon 6 fibers. This structure can be stretched or compressed to convert the radial expansive forces into contractile forces. We performed the finite element analysis and the performance test of pneumatic muscle actuator. Also, the pneumatic muscle actuator was manufactured and tested by home-made tester. The results of FEA was similar with performance test below the maximum error of 42 %.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.155-162
• /
• 2010

Nylon 6 was blended with a brominated epoxy resin, tetrabromobisphenol A diglycidyl ether (DGEBBA), to enhance flame retardant property. Thermal properties of the blends were analyzed by DSC. Melting point and crystallization temperature decreased as the amount of epoxy resin increased. Melt index and relative viscosity decreased as the amount of the epoxy resin increased. When the blended amount of the epoxy resin was below 5%, the melt index decreased while the relative viscosity slightly increased. The blend resin was successfully spun into fiber without swelling or drawing the resonance phenomena. However, both the tenacity and elongation of the fiber decreased by increasing the amount of the DGEBBA.

• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.1-14
• /
• 1997

Nylon 6 grafted with polyacrylamide(PAAm) was synthesized by a dispersion polymerization method at 6$0^{\circ}C$ for 2 hours, and a cresol-soluble graft polymer(CSGP) and water-dispersable graft polymer (WI)GP) were separated. Infra-red(IR) spectrum analysis, differential scanning calorimetery(DSC), thermogravimetery(TG), and X-ray diffraction analysis were carried out to research their structural characteristics.

• 한국의류학회지
• /
• 제23권2호
• /
• pp.326-334
• /
• 1999

Polyaniline(PAn)-nylon 6 composite fabrics were prepared by immersing the nylon 6 fabrics in 100% distilled aniline for specified diffusion time and drawn out. Then the excess aniline on the fabric surface was blotted and successive polymerization was initiate by immersing them into oxidant and dopant solution for in situ polymerization of polyaniline. Consequently highly conductive PAn-nylon 6 composite fabrics could be obtained and the conductivity reaches as high as 10-2 S/cm. The maximum conductivity was obtained when the fabric was immersed in 100% aniline at 4$0^{\circ}C$ for 3hours and polymerization was proceeded in 0.25M ammonium peroxydisulfate solution at 5$^{\circ}C$ for 1hour.