• Science of Emotion and Sensibility
• /
• v.6 no.1
• /
• pp.27-32
• /
• 2003

The objectives of this study the effects of fabric noise from active wear on electrodiagnosis(EMG), to examine the effects on subjective sensation, and to relate the EMG results and the subjective sensation.. Five nylon water repellent taffeta fabrics were rubbed each other and the fabric noise were recorded. EMG was done from 10 female university students and electrodes were attached on each participant's upper arm and lower am. The subjective sensation was measured by FMME(Free Modulus Magnitude Estimation). The EMG values from upper arm showed higher voltage than those from lower arm, and the differences between values with fabric sound and without were larger at upper arm than those at lower am. EMG decreased when fabric sound was evaluated soft and pleasant, however It increased in proportion as fabric sound was evaluated loud and sharp. The predicted models for subjective sensation using physical sound properties and EMG results were well explained except roughness. Pleasantness was well predicted by EMG at upper am and EMG at lower arm, as the result, it was explained that the lower the EMG, the more pleasant the participant.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.321-324
• /
• 2002

Recently, organic-inorganic nanocomposites have attracted great interest from researchers since they frequently exhibit unexpected hybrid properties synergistically derived from two components[1]. The addition of highly dispersed inorganic nano-sized fillers permits improvement of certain properties of polymers as compared with conventional particulate composites; increase of modulus and strength, improved barrier properties, increase in solvent and heat resistance, and good optical properties[2]. (omitted)

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.284-292
• /
• 2014

Polymer has low mechanical strength than metal. In particular, the impact strength is very weak. Impact modifier reinforced polymers are frequently used. Impact strength of reinforced polymer is changed according to content and distribution of impact modifier. In this study, izod impact test has been simulated to analyze the mechanism of impact modifier reinforced Nylon 6. Computational results were compared for numbers and distributions of impact modifier. As the total volume of rubber particles decreased, the stress at the notch increased for the simulation model that the volume decreases as particle number increases. As the surface area of particle sphere increased, the stress and difference of principle stress increased for the simulation model that the total surface increases as particle number increases.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.211-216
• /
• 2009

In order to cope with risk issues of overseas on 4,4'-diaminodiphenylmethane (4,4'-MDA) known to used in the production of polyamide resins, we investigated on 4,4'-MDA migration from plastic cooking utensils. 93 samples of plastic cooking utensils were collected from the retail markets in 7 major cities of Korea during March to June, 2007 and 4,4'-MDA levels migrated to food simulants, water, 4% acetic acid, 20% ethanol and n-heptane, on plastic cooking utensils was quantified by liquid chromatography with tandem mass spectrometry (LC-MS/MS). 4,4'-MDA was detected in 14 samples, and the levels of 4,4'-MDA migrated to food simulants were in the range of $0.001{\sim}0.026$ ppm. Among them, the 4,4'-MDA migration amounts of 2 samples were above 0.01 ppm defined by the EU.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.142-149
• /
• 2002

The frictional properties of nylon can be improved by the impregnation of lubricants like wax, oil or graphite. The inclusion of these lubricants, on the other hand, decreases the mechanical properties of nylon, such as tensile strength, hardness and impact strength. As an attempt to maximize frictional properties, while minimizing a decrease in the mechanical properties, various kinds of nylon containing 3 wt% wax and varying contents of oil or graphite were prepared. It was found that the synergy effects to improve both friction and anti-wear properties is evidenced by impregnating a combination of wax/oil or wax/graphite. The wear rate of a nylon containing 3 wt% of wax and 1.5 wt% of oil turned out to be 1/4 of that of nylon impregnated with 8 wt% wax or 8 wt% oil. The latter showed the lowest wear rate among the nylons prepared with a single lubricant. In addition, the friction coefficient of the developed nylon was found to be very similar to the nylon with 8 wt% wax only.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.456-458
• /
• 2001

PBT는 엔지니어링 플라스틱용으로 전기ㆍ전자부품, 자동차부품에 주로 사용되며 이 두 종의 용도로 약 80％정도 소비된다. 섬유로 사용하는 것은 매우 소량이다. PBT섬유는 가연가공하여 주로 사용되며 스트레치 가공사로 되었을 때 중요한 특징은 권축의 신장회복성이 PET 및 나일론 6 섬유보다 아주 우수하다는 것이다. (중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.104-109
• /
• 2009

In this paper, polymer nanocomposites were fabricated by mixing fire-resistant and high pseudoplastic Nylon 6,6 with MWNT(Multiwalled Nanotube), which has mechanical, electrical, and heat stable properties. The experiments were performed in order to investigate their mechanical and electrical properties depending on the level of MWNT and the presence of acid treatment on Nylon 6.6. Morphology of polymer nanocomposites was observed using Scanning Electron Microscopy technique. The results indicate that the polymer nanocomposites have the best mechanical and electrical properties in the optimal conditions of Nylon 6.6 and MWNT(10wt%).

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.18-26
• /
• 2003

Nylon 6.6 was treated with anionic synthetic tanning agent at different pH values, temperatures and liquor ratios to determine exhaustion properties. Treatments using syntan were conducted to the undyed nylon 6.6 fiber and three acid dyeings and then samples of the bath solution were subjected to HPLC analysis. Mass analysis was considered to determine the syntan components. In addition, the effect of applications using syntan and syntan/cation in improving the stain resistance was observed. The optimum treatment condition of syntan was achieved and the major component of syntan, being exhausted to the nylon substrates, was determined. In terms of stain blocking effect, a significant improvement was achieved by the syntan and syntan/cation treatments.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.226-231
• /
• 1998

Hot melt adhesive which is solventless type has been widely used due to the possibility of automated adhesion process. The main purpose of this study is the development of polyamide based hot melt adhesive to improve the property of conventional ethylene-vinyl acetate hot melt adhesive, which has an inherent problem against heat resistance. In this study, it was found that the terpolymers of nylon 6, nylon 66, and nylon 12(CM831, 843P types) instead of nylon homopolymer were suitable base resins for hot melt adhesive, since the disruption of regularity in the polymer chains reduced the crystallinity, resulting in lower melting point and melt viscosity. According to the results, the optimum adhesion property could be obtained by the using 75/25~50/50 weight radio of CM831/843P resin as a base resin. Terpene resin was used as tackifier to improve adhesion and wetting properties. The best result can be obtained with the 10 wt.% addition of terpene resin. The terpene resin acted as proper tackifier in this system which decreased the melt temperature and viscosity, but increased the mechanical strength of adhesive itself. Also, the rheological property of the adhesive changed from typical non-Newtonian behavior to Newtonian behavior as terpene resin was added.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.947-958
• /
• 2008

To study the effect of a washing machine with silver nano technology on its detergency, the discoloring of the dyed clothes and the staining of standards adjacent fabrics were examined. As the laundry specimen, cotton fabric dyed with reactive dyes and Polyester fabric dyed with disperse dyes were chosen; and as the adjacent fabrics, undyed cotton. polyester and nylon fabrics were chosen. The colorfastness was evaluated after washing under conditions that those washing temperature, liquor ratio, detergency concentration and the type of water were varied. When the clothes were washed with the tap water contains silver ion, the deposition of silver compounds into the washed clothes was measured. As a results, after the washing in the various conditions, discoloring of the dyed clothes was not intense. The higher the washing temperature and the lower the liquor ratio, the larger the staining appeared on the white fabrics; especially for the white nylon fabrics. The concentration of detergent and the type of water affected hardly the colorfastness. After the repeated washing with the water contains silver, whiteness of the cotton and the nylon fabrics were lower than the result after the washing with the tap water, and a quantity of silver ions was found on the washed clothes.