가스관의 비파괴검사로 가장 널리 사용되고 있는 자속누설탈사에서 가스배관의 잔류자화(residual magnetization, $M_{res}$)와 탐사횟수가 누설자속에 미치는 영향을 정량적으로 간편하게 실험실에서 해석할 수 있도록 배관대신에 소형의 모의장치를 제작하여 조사하였다. 제작된 장치는 나사에 의한 결함까지도 측정할 수 있고 또 원형 링을 완벽히 탈자시킬 수 있어 탐사가 진행됨에 따라 잔류자화의 영향, 배관의 자화상태변화와 누설자속 등을 효과적으로 모사할 수 있었다. 탐사횟수가 증가할수록 잔류자화, 최대자속밀도 그리고 검출전압은 감소하다가 일정해지지만 초기잔류자화(initial $M_{res}$)가 커지면 최종잔류자화(final $M_{res}$)도 커졌다. 탐사조건이 일정할 경우 검출전압은 배관의 최대자속밀도보다는 직전의 잔류자화의 크기에 직선적으로 비례하였으며 이것은 탄소강으로 만들어진 원형 링의 자기이력현상, 즉 자구구조의 변화 때문에 생기는 것으로 정확한 탐사신호를 해석하기 위해서는 이력현상을 고찰할 필요가 있다. 또 잔류자화가 크면 첫 번째 탐사에서 높은 검출전압을 얻을 수 있다는 것을 착안하여 두 번째 탐사에서는 착자기의 자화방향을 바꾸면 높은 검출을 얻을 수 있음을 제안하였다.
Statement of problem : Implant screw loosening remains a problem in implant prosthodontics. Some abutment screws with treated surfaces were introduced to prevent screw loosening and to increase preload. DLC(Diamond Like Carbon) film has similar properties on hardness, wear resistance, chemical stability, biocompatibility as real diamond materials. Purpose : The purpose of this study was to investigate the effect of lubricant layer on abutment screw and to discriminate more effective method between soft lubricant and hard lubricant to prevent screw loosening. Material and method : In this study, $1{\mu}m$ thickness DLC was used as protective, lubricating layer of titanium screws and 3 times removal torque was measured on the abutment screws to investigate the difference in 10 coated and 10 non-coated abutment screws. Results : The results indicated that the implants with DLC coating group were not more resistant to the applied force in screw loosening. At 32Ncm, the 3 times removal torque in DLC group were $27.75{\pm}2.89,\;25.85{\pm}2.35$ and $26.2{\pm}2.57$. The removal torque in no-coated abutment screws were $27.85{\pm}4.23,\;27.35{\pm}2.81$ and $27.9{\pm}2.31$, respectively. Conclusion : The lubricant layer used in this study was Diamond Like Carbon(DLC) and it have a properties of hard and stable layer. The DLC coating layer was hard enough to prevent distortion of screws in the repeated unscrewing procedure in clinical situation. The reduced friction coefficient in hard DLC layer was not effective to prevent screw loosening.
연구목적: 이 연구는 측방접근법을 통해 상악동 골이식을 시행한 후 임플란트를 식립하였을 때, 누적 생존률 및 성별, 연령별, 이식재, 자가골의 공여부, 술전 잔존골 양, 무치악 형태, 식립 시기, 임플란트 종류, 직경과 길이에 따른 임플란트의 생존률 및 변연골의 방사선학적 결과의 차이를 분석하고자 시행되었다. 연구 재료 및 방법: 상악 구치에 측방접근법을 통해 상악동 골이식술 후 임플란트 보철치료를 시행한 71명을 대상으로 하였으며 표면 처리된 나사모양의 임플란트를 사용하였다. Osseotite(BIOMET 3i, Warsaw, USA), Neoplant(Neobiotec, Seoul, Korea), $Br\ddot{a}nemark$(Nobel Biocare, Goteberg, Sweden)과 SSII(Osstem, Busan, Korea)를 사용하였다. 최소 6개월 이상의 기간 관찰 누적 생존률은 Kaplan-Meier 분석법을 이용하였으며 다른 요소에 따른 임플란트의 생존률의 유의성은 Chi-square test로 검정하였다. 결과: 상악동골 이식술이 시행된 모든 증례에서 임플란트 식립이 가능한 골 양이 얻어졌으며 92%의 생존률을 보였다. 결론: 상악동 골이식술을 시행한 후 임플란트 보철 수복은 자가골 단독 사용시에 자가골과 골대체 물질이 혼합된 것보다 우수한 생존률을 보였다. 지연 식립하는 경우가 임플란트와 동시에 식립하는 경우보다 생존률이 높았다.
본 연구의 목적은 내측연결형 임플랜트와 일체형 지대주를 사용하여 최종 보철물을 시적한 뒤에 5만 번의 반복하중 후에 다시 체결하고 20만 번의 반복하중을 가한 후의 지대주 풀림토크와 20만 번의 반복하중을 받은 지대주 풀림토크가 어떻게 달라지는지를 비교하고자 하는 것이다. 실험 재료로는 타이타늄 지대주와 DLC 코팅된 지대주를 사용하였다. 실험군은 4군으로 모두 8개의 ITI SLA $4.1{\times}10mm$ 를 사용하였다. A군과 B군은 5만번, 20만번 반복하중을 가하고 Periotest값과 풀림 토크값을 측정하였으며 C군과 D군은 20만번 반복하중을 가하고 Periotest 값과 풀림토크값을 측정하였다. 풀림 토크값의 측정은 디지털 토크 게이지를 사용하였고, 반복하중은 MTS. (Bionix 850 II, MTS, U.S.A.)를 사용하였으며 100N/cm의 힘을 20도의 경사, 14Hz 의 조건으로 가하였다. A군과 C군은 코팅하지 않은 타이타늄 지대주를 사용하였으며, B군과 D군은 DLC 코팅한 지대주를 사용하였다. 1. 5만번 반복하중을 가한 뒤 측정한 풀림 토크는 B군에서 약간 더 큰 평균값을 보였다. 하지만 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 2. 20만번 반복하중을 가한 뒤 측정한 최종 풀림 토크 값은 A군은 C군보다, B군은 D군보다 약간 더 큰 평균값을 보였으나 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 3. 20만번 반복하중을 가한 최종 풀림 토크 값은 A, B군과 C, D군 사이에 통계학적으로 유의할 만한 차이가 없었다 (P>0.05).
Silicon dioxide thin films were deposited on p-type Si (100) substrates by atomic layer deposition (ALD) method using alternating exposures of $SiH_2$$Cl_2$ and $O_3$ at $300^{\circ}C$. $O_3$ was generated by corona discharge inside the delivery line of $O_2$. The oxide film was deposited mainly from $O_3$ not from $O_2$, because the deposited film was not observed without corona discharge under the same process conditions. The growth rate of the deposited films increased linearly with increasing the exposures of $SiH_2$$Cl_2$ and $O_3$ simultaneously, and was saturated at approximately 0.35 nm/cycle with the reactant exposures over $3.6 ${\times}$ 10^{9}$ /L. At a fixed $SiH_2$$Cl_2$ exposure of $1.2 ${\times}$ 10^{9}$L, growth rate increased with $O_3$ exposure and was saturated at approximately 0.28 nm/cycle with $O_3$ exposures over$ 2.4 ${\times}$ 10^{9}$ L. The composition of the deposited film also varied with the exposure of $O_3$. The [O]/[Si] ratio gradually increased up to 2 with increasing the exposure of $O_3$. Finally, the characteristics of ALD films were compared with those of the silicon oxide films deposited by conventional chemical vapor deposition (CVD) methods. The silicon oxide film prepared by ALD at $300^{\circ}C$ showed better stoichiometry and wet etch rate than those of the silicon oxide films deposited by low-pressure CVD (LPCVD) and atmospheric-pressure CVD (APCVD) at the deposition temperatures ranging from 400 to $800^{\circ}C$.
Purpose: This study was performed retrospectively to evaluate clinical outcomes of distal metatarsal osteotomy using bio-compression screw as the joint preservation method for advanced hallux rigidus. Materials and Methods: Eleven cases were followed up for more than 1 year after distal metatarsal dorsal wedge osteotomy for advanced hallux rigidus. The clinical evaluation was performed according to the American Orthopaedic Foot and Ankle Society (AOFAS) score and patient's satisfaction score. The range of motion, and the period to return to running exercise, tip-toeing gait, squatting, walking down the stairs were evaluated. As the radiographic evaluation, the interval of $1^{st}$ MTP (metatarsophalangeal) joint space and the period to union were measured. Results: The AOFAS hallux score had improved significantly from preoperative average 50.7 points to 87.6 points at the last follow-up (p=0.005). The subjective satisfaction score was average 90.6 points. There were no case of subsequent fusion or additional operation, and no complication associated with bio-compression screw. The period to return to running exercise, tip-toeing gait, squatting, walking down the stairs were average of 24.8 weeks, 20.4 weeks, 16.8 weeks, 18.5 weeks respectively. Dorsiflexion of $1^{st}$ MTP joint had improved significantly from preoperative average $17.5^{\circ}$ to $44^{\circ}$ (p<0.001). All cases achieved union of osteotomy site, and the period to union was average 10.4 weeks. The interval of $1^{st}$ MTP joint space had improved significantly from preoperative average 1.2 mm to 3.5 mm (p=0.014). Conclusion: Distal metatarsal osteotomy using bio-compression screw seems to be one of effective treatment methods for advanced hallux rigidus, because of restoration of the first MTP joint motion, and reliable pain relief, and needlessness of hardware removal.
Purpose: Current trend in implant dentistry is changing from external connection to internal connection. To evaluate the splinting of external and internal connection implant on screw loosening, 2-units prosthesis was fabricated with BioPlant $System^(R)$ of external connection type and Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. Material and Method: Experimental group is classified into three groups. 1) $G_1-EE$: 2-units prosthesis was fabricated with two Bioplant $System^(R)$ of external connection type. 2) $G_1-EI$: 2-units prosthesis was fabricated with one BioPlant $System^(R)$ of external connection type and one Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. 3) $G_1-II$: 2-units prosthesis was fabricated with two Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. In fabricating 2-units prosthesis, two hexed abutments are recommended when two implants are installed parallel, otherwise one hexed abutment is used on major occlusal force area and one nonhexed abutment is used on the other area. Since it is rare to find two implants being parallel, it is hard to fabricate prosthesis with passive adaptation using two hexed abutments. It is much more difficult to acquire passive adaptation when using hex abutment compared to nonhex abutment. To evaluate the influence of hexed and nonhexed abutment on screw loosening, 2-units prosthesis was fabricated with hexed and nonhexed abutment. Experimental group is classified into three groups. 1) $G_2-HH$: 2-units prosthesis was fabricated with two hexed abutments. 2) $G_2-HN$: 2-units prosthesis was fabricated with one hexed abutment and one nonhexed abutment. 3) $G_2-NN$: 2-units prosthesis was fabricated with two nonhexed abutments. Result: The results of comparing the detorque value after loading on a each prosthesis periodically are as follows. 1. In splinting group of external and internal connection implant, $G_1-II$ group demonstrated the biggest detorque value, followed by $G_1-EI$ group and $G_1-EE$ group. 2. There is no notable significance between external connection implant of $G_1-EI$ group and $G_1-EE$ group and also no significance between internal connection implant of $G_1-EI$ group and $G_1-II$ group. 3. $G_2-HH$ group showed higher detorque value than $G_2-HN\;and\;G_2-NN$ group. From the results, we can concluded that using both external connection and internal connection implant together is clinically acceptable and in order to acquire a good passive adaptation in fabricating 2-units implant prosthesis we can use two nonhexed abutments.
Statement of problem: In order to increase preload with reducing the friction coefficient, abutment screws coated with pure gold and Teflon as dry lubricant coatings have been introduced. But the reported data indicate that if screw repeated tightening and loosening cycle, an efficiency of increasing preload was decreased by screw surface wearing off. Purpose: This study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on the preload of abutment screws and the stability of coating surface after repeated closures. Material and method: The rotational values of abutment screws and the compressive forces between abutment and fixture were measured in implant systems with three different joint connections, one external butt joint and two internal cones. Moreover the stability and the alteration of coating surface were examined by comparison of the compressive force and the removable torque values during 10 consecutive trials, observation with scanning electron microscope and analyzed the elemental composition with energy dispersive x-ray spectroscopy Results and conclusion: 1. Application of coating resulted in significant increase of compressive force in all implant systems(P<.05). The increasing rate of compressive force by coating in external butt joint was gloater than those in internal cones (P<.05). 2. Coated screw showed the significant additional rotation compared to non-coated screw in all implant systems (P<.05). There were no significant differences in the increasing rate of rotation among implant systems (P>.05). 3. Removable torque values were greater with non-coated screw than that with coated screw (P<.05). 4. Coated screw showed insignificant variations in the compressive forces during 10 consecutive trials(P>.05) 5. After repeated trials, the surface layer of coated screw was maintained relatively well. However surface wearing and irregular titanium fragments were found in non-coated screw.
목적: 구상돌기는 주관절의 안정성 및 기능에 매우 중요하기 때문에, 구상돌기 골절 시 정확한 골편의 평가 및 고정이 매우 중요하다. 구상돌기 골절에 대한 방사선학적 평가는 주로 주관절 측면 촬영에서 하게 되는데, 요골두와 겹치기 때문에 정확한 관찰이 어려울 수 있다. 이에 저자들은 구상돌기 골절의 평가를 위한 새로운 방사선 촬영 방법, coronoid view를 고안하여 소개하고자 한다. 대상 및 방법: coronoid view는 구상돌기 골절 중 특히 사선의 골절선을 갖는 전내측 골편을 평가하기 위하여 고안되었다. 환자를 촬영대에 대하여 직각이 되게 옆으로 앉힌 후, 환측 견관절을 45도 외전하고, 주관절을 90도 굴곡한 상태에서 촬영대 위에 팔을 놓는다. 필름은 주관절 밑에 놓고, 주관절의 직상방에서 주관절을 중심으로 방사선을 조사한다. 이 방법으로 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두가 겹치는 것을 피할 수 있다. 결론: coronoid view는 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두 음영을 피할 수 있기 때문에 구상돌기 골절의 정확한 평가에 도움이 될 것으로 판단된다. 특히 금속 나사 등의 내고정물 때문에 컴퓨터 단층촬영이 불가능한 관혈적 정복술 후 환자의 경과 관찰에 특히 유용할 것으로 판단된다.
차세대 반도체 및 디스플레이 소자에 적용되는 실리콘 질화막은 정확한 두께 제어와 우수한 물성을 필요로 한다. 본 연구에서는 우수한 특성의 실리콘 질화막을 형성하기 위해 Si 원료물질로 $SiC1_4$, N 원료물질로 $NH_3$을 사용하고 $500^{\circ}C$에서 $600^{\circ}C$ 온도구간에서 batch-type 장비를 이용하여 원자층 증착 방법으로 박막을 형성하고 증착된 박막의 특성을 살펴보았다. Batch-type 장비를 사용한 박막의 증착은 표면반응에 의한 균일한 원자층 증착임을 확인하였으며, 증착 cycle의 횟수를 조절하여 원하는 두께의 박막을 형성할 수 있었다. 원자층 증착된 박막의 조성, 굴절률 및 습식각 속도를 기존의 저압화학증착 방법에 의해 증착된 박막과 비교한 결과, 원자층 증착 방법을 사용하여 기존의 방법보다 증착온도를 $250^{\circ}C$ 이상 낮추면서도 유사한 물성을 가진 박막을 형성할 수 있음을 확인하였다. Pyridine을 촉매로 첨가하여 원자층 증착한 박막의 경우에는 증착속도를 50% 가량 향상시킬 수 있었으나 박막의 구조가 불안정하여 쉽게 산화되므로 반도체나 디스플레이 소자 제조에 적용하기에는 부적절한 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.