• 센서학회지
• /
• 제33권1호
• /
• pp.34-39
• /
• 2024

Energy harvesting technology that converts the wasted energy resources into electrical energy is emerging as a semipermanent power source for self-powered electronics and wireless low-power sensor systems. Among the various energy conversion techniques, flexible piezoelectric energy harvesters (f-PEHs), using materials with piezoelectric effects, have attracted significant interest because they can harvest a small mechanical energy into electrical signals without constraints of time and space in various environments. In this study, we used a flexible piezoelectric composite film fabricated by dispersing BaHf_xTi_(1-x)O₃ (x = 0, 0.01, 0.05, 0.1) piezoelectric powders inside a polymeric matrix to facilitate f-PEHs. The fabricated f-PEH with optimal Hf contents (x = 0.05) generated a maximum output voltage of 0.95 V and current signal of 130 nA with stable electrical/mechanical disabilities under periodically bending deformations. In addition, we demonstrated a cantilever-type f-PEH and investigated its potential as a sensor by characterizing the output performance under mechanical vibrations at various frequencies. This study provides the breakthrough for realizing self-powered energy harvesting and sensing systems by adopting the lead-free piezoelectric composites under vibrational environments.

• Korean Chemical Engineering Research
• /
• 제62권3호
• /
• pp.238-245
• /
• 2024

젖산 전극은 환자의 건강상태와 스트레스 수준, 및 운동선수의 피로도를 실시간으로 모니터링하는 젖산 센서 또는 젖산 연료전지 전극으로 활용될 수 있다. 본 연구에서는 젖산 산화효소, 카탈라아제, 미토콘드리아로 구성된 고성능 전극을 제작하고 전극의 표면분석 및 전기화학적 특성을 조사하였다. 단일벽 탄소나노튜브로 개질된 탄소종이(CPSWCNT)는 개질 전보다 전기 전도성이 크게 향상되었다. 젖산 산화효소, 카탈라아제, 그리고 미토콘드리아가 부착된 전극(CP-SWCNT-LOx-Cat-Mito)은 젖산 산화효소와 카탈라아제가 부착된 전극에 비하여 많은 전류를 생산하였다. 빌리루빈 산화효소(BOD)가 부착된 전극(CP-SWCNT-BOD)이 생산하는 환원전류량은 전해질의 산소 존재 유무에 따라 크게 영향을 받았다. CP-SWCNT-LOx-Cat-Mito (anode)와 CP-SWCNT-BOD (cathode)로 구성된 연료전지는 133 ㎂/cm²로 방전 시 0.2 V의 셀 전위를 유지하며 29 ㎼/cm²의 전력을 생산하였다. 본 연구결과는 미토콘드리아가 젖산 센서 및 연료전지 성능 향상에 필수적인 생체물질임을 시사한다.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.206-213
• /
• 2015

함정용 전자광학추적장비의 센서부에서 해수면반사파에 의해 발생하게 되는 영상추적간섭 현상을 최소화하고자 전방향성, 점진적인 굴절률 및 표면 요철구조를 갖는 산화아연에 플루오르화마그네슘을 코팅한 반사방지막을 전자빔 증착 장비를 통해 제작하였다. 최적화된 산화아연에 플루오르화마그네슘을 코팅한 반사방지막은 기존의 산화아연 반사방지막과 비교하여 점진적인 굴절률 변화에 따라 표면 프레넬 반사를 최소화하고 이를 통해 전자광학추적장비의 영상추적간섭 현상을 제거하는 장점이 있다. 본 실험을 통해, 산화아연에 플루오르화마그네슘을 코팅한 반사방지막이 다양한 전자광학장비의 반사방지막으로써 적용이 가능함을 확인하였다.

• 분석과학
• /
• 제29권1호
• /
• pp.35-42
• /
• 2016

A new nano-composite carbon ink for the development of disposable dopamine (DA) biosensors based on screen-printed carbon electrodes (SPCEs) is introduced. The method developed uses SPCEs coupled with a tyrosinase modified nano-composite carbon ink. The ink was prepared by an “in-house” procedure with reduced graphene oxide (rGO), Pt nanoparticles (PtNP), and carbon materials such as carbon black and graphite. The rGO-PtNP carbon composite ink was used to print the working electrodes of the SPCEs and the reference counter electrodes were printed by using a commercial Ag/AgCl ink. After the construction of nano-composite SPCEs, tyrosinase was immobilized onto the working electrodes by using a biocompatible matrix, chitosan. The composite of nano-materials was characterized by X-ray photoelectron spectroscopy (XPS) and the performance characteristics of the sensors were evaluated by using voltammetric and amperometric techniques. The cyclic voltammetry results indicated that the sensors prepared with the rGO-PtNP-carbon composite ink revealed a significant improvement in electro-catalytic activity to DA compared with the results obtained from bare or only PtNP embedded carbon inks. Optimum experimental parameters such as pH and operating potential were evaluated and calibration curves for dopamine were constructed with the results obtained from a series of amperometric detections at −0.1 V vs. Ag/AgCl. The limit of detection was found to be 14 nM in a linear range of 10 nM to 100 µM of DA, and the sensor’s sensitivity was calculated to be 0.4 µAµM⁻¹cm⁻².

• 전기학회논문지
• /
• 제67권3호
• /
• pp.413-418
• /
• 2018

In this paper, we describe the development of a non-enzymatic glucose sensor based on copper nanocubes(Cu NCs) electroplated laser induced graphene(LIG) electrodes which can detect a certain range of glucose concentrations. $CO_2$ laser equipment was used to form LIG electrodes on the PI film. This fabrication method allows easy control of the LIG electrode size and shape. The Cu NCs were electrochemically deposited on the LIG electrodes to improve electron transfer rates and thus enhancing electrocatalytic reaction with glucose. The average sheet resistances before and after electroplating were $15.6{\Omega}/{\Box}$ and $19.6{\Omega}/{\Box}$, respectively, which confirmed that copper nanocubes were formed on the laser induced graphene electrodes. The prepared electrode was used to measure the current according to glucose concentration using an electrochemical method. The LIG electrodes with Cu NCs demonstrated a high degree of sensitivity ($1643.31{\mu}A/mM{\cdot}cm^2$), good stability with a linear response to glucose ranging from 0.05 mM to 1 mM concentration, and a limit of detection of 0.05 mM. In order to verify that these electrodes can be used as flexible devices, the electrodes were bent to $30^{\circ}$, $90^{\circ}$, and $180^{\circ}$ and cyclic voltammetry measurements were taken while the electrodes were bent. The measured data showed that the peak voltage was almost constant at 0.42 V and the signal was stable even in the flexed condition. Therefore, it is concluded that these electrodes can be used in flexible sensors for detecting glucose in the physiological sample like saliva, tear or sweat.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.352.1-352.1
• /
• 2016

양자점은 나노미터 크기의 반도체 결정으로 밴드갭에 따라 광학적, 전기적 성질이 달라지는 독특한 성질을 가지는 형광물질으로 활발히 연구되고 있다. 중금속을 기반으로 한 양자점은 높은 발광효율과 광안전성을 가지며, 가시광선 영역에서 빛을 내는 특징을 가지고 있다. 그러나 중금속을 사용하기 때문에 독성이 있어 인체나 환경에 유해하여 응용 연구에 제한적이다. 반면에, 탄소 기반의 양자점은 중금속 기반의 양자점과 비슷한 성질을 가질 뿐만 아니라, 높은 용해도와 낮은 독성으로 인해 생체적합성이 높다는 장점이 있다. 이를 이용하여 발광다이오드(LEDs), 태양전지, 광촉매 뿐만 아니라 바이오이미징, 바이오센서 등 생물학분야에도 응용 될 수 있다. 본 연구에서는 Bottom-up 합성 방법으로 유기전구체를 이용하여 질소를 함유하고 있는 양친매성 탄소 양자점(N-GQDs)을 합성하였다. 합성에 사용한 유기전구체는 기존에 보고된 유기전구체와 다르게 반응 진행 중에도 pH 측정 결과 중성을 나타내며, 반응 온도($225^{\circ}C$)와 유사한 온도에서도 pH 값은 여전히 6.0 이상의 값을 나타냈다. 중성을 띄는 특징으로 인해 추가적인 산제거 과정이나 표면안정화 과정이 필요 없다는 장점을 가지고 있다. 합성된 N-GQDs는 높은 결정성의 원형구조를 가지며, 원자힘현미경(AFM) 분석을 통해 높이가 ~ 1.5 nm 미만으로 3층 이하의 두께로 형성되었음을 확인하였다. 또한, 적외선 분광법(FT-IR) 분석을 통해 O-H기, 방향족 고리의 C = C (또는 C = N)기 및 C-N기가 각각 ~3250, ~1670과 ~1140 cm-1에서 확인할 수 있다. 합성된 양자점을 유기태양전지의 active layer에 소량(2 wt%) 첨가하여 양자점의 광학적, 전기적 성질을 확인하였다. 비교군 유기태양전지보다 N-GQDs가 첨가된 유기태양전지의 외부양자효율(PCE)이 7.3%에서 8.4%로 약 20%가 증가하는 것을 보였다. 이는 양자점이 상대적으로 흡수가 약한 단파장 영역의 빛을 흡수하고 PL을 내어 active layer로 에너지 트랜스퍼 현상이 일어나 전자전달을 원활하게 해 주기 때문이다. 앞으로 본 연구의 가능성과 추가적인 연구를 통해 더 많은 분야에 응용되기를 기대한다.

• 한국재료학회지
• /
• 제28권8호
• /
• pp.466-473
• /
• 2018

Nickel oxide(NiO) thin films, nanorods, and carbon nanotube(CNT)/NiO core-shell nanorod structures are fabricated by sputtering Nickel at different deposition time on alumina substrates or single wall carbon nanotube templates followed by oxidation treatments at different temperatures, 400 and $700^{\circ}C$. Structural analyses are carried out by scanning electron microscopy and x-ray diffraction. NiO thinfilm, nanorod and CNT/NiO core-shell nanorod structurals of the gas sensor structures are tested for detection of $H_2S$ gas. The NiO structures exhibit the highest response at $200^{\circ}C$ and high selectivity to $H_2S$ among other gases of NO, $NH_3$, $H_2$, CO, etc. The nanorod structures have a higher sensing performance than the thin films and carbon nanotube/NiO core-shell structures. The gold catalyst deposited on NiO nanorods further improve the sensing performance, particularly the recovery kinetics.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.223-227
• /
• 2010

Recently, one-dimensional semiconducting nanomaterials have attracted considerable interest for their potential as building blocks for fabricating various nanodevices. Among these semiconducting nanomaterials,, $SnO_2$ nanostructures including nanowires, nanorods, nanobelts, and nanotubes were successfully synthesized and their electrochemical properties were evaluated. Although $SnO_2$ nanowires and nanobelts exhibit fascinating gas sensing characteristics, there are still significant difficulties in using them for device applications. The crucial problem is the alignment of the nanowires. Each nanowire should be attached on each die using arduous e-beam or photolithography, which is quite an undesirable process in terms of mass production in the current semiconductor industry. In this study, a simple process for making sensitive $SnO_2$ nanowire-based gas sensors by using a standard semiconducting fabrication process was studied. The nanowires were aligned in-situ during nanowire synthesis by thermal CVD process and a nanowire network structure between the electrodes was obtained. The $SnO_2$ nanowire network was floated upon the Si substrate by separating an Au catalyst between the electrodes. As the electric current is transported along the networks of the nanowires, not along the surface layer on the substrate, the gas sensitivities could be maximized in this networked and floated structure. By varying the nanowire density and the distance between the electrodes, several types of nanowire network were fabricated. The $NO_2$ gas sensitivity was 30~200 when the $NO_2$ concentration was 5~20ppm. The response time was ca. 30~110 sec.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.52-57
• /
• 2007

생명현상 발현에 중요한 역할을 하는 생체 분자간 특이적 상호작용을 단분자 수준에서 이해하려는 연구는 매우 중요한 일이다. 나노 바이오 측정기술을 이용하여 여러 복잡한 생명현상을 그 기본 단위인 단일 세포 차원에서 직접 측정하여 응용하려는 시도가 이루어지고 있다. 이런 시도로써, 원자힘 현미경을 이용한 생체분자간의 결합력 측정은 생명현상과 가장 유사한 환경에서 단일 생체 분자간 또는 분자 내 힘을 직접 측정함으로써, 단일 생체분자의 현상을 관찰 할 수 있다는 장점을 가지고 있다. 특히 단분자 힘 분광학을 이용한 단일 생체분자내의 세부 단위체간 상호작용에 대한 연구와 단백질-단백질, 단백질-리간드, DNA-DNA의 분자인지 상호작용에 대한 연구는 많은 생명과학 분야 연구자들의 관심을 끌고 있을 뿐만 아니라 더 나아가 새로운 관련 기술의 개발을 촉진시키고 있다.

• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1227-1233
• /
• 2011

Cellulose Electro-Active Paper (EAPap) has been known as a new smart material that is attractive for a bio-mimetic actuator due to its merits in terms of lightweight, dry condition, large displacement output, low actuation voltage and low power consumption. Cellulose EAPap is made by regenerating cellulose and aligning its micro-fibrils. This paper introduces several EAPap materials, which are based on natural cellulose and its hybrid nanocomposites mixed/blended with inorganic functional materials. By chemically bonding and mixing with carbon nanotubes and inorganic nanoparticles, the cellulose EAPap can be a hybrid nanocomposite that has versatile properties and can meet material requirements for many applications. Recent research trend of the cellulose EAPap is introduced in terms of material preparations as well as application devices including actuators, temperature and humidity sensors, biosensors, chemical sensors, and so on. This paper also explains wirelessly driving technology for the cellulose EAPap, which is attractive for bio-mimetic robotics, surveillance and micro-aerial vehicles.