• Journal of the Korean Magnetics Society
• /
• v.20 no.4
• /
• pp.167-172
• /
• 2010

To meet on going challenges in nano-biomedical technology, the convergence of "spintronics", "biomedical" technology is a major break through in imaging, diagnosis and therapy, high-throughput genomic analysis. Especially magnetic bioassay is one of crucial devices for early diagnosis of specific analytes, point-of-care and U-health care application. In this paper, current status on high resolution magnetic sensors for bioassay and on-chip magnets for biomolecule transportation will be reviewed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.422-422
• /
• 2012

In2O3 계열의 산화물 전도성 투명 전극은 최근 디스플레이, 태양전지 등 전자산업에서 중요한 소재로 전 세계적으로 많이 연구되고 있다. 또한 3.6 eV의 wide bandgap을 가짐으로서 센서 등의 반도체 소자로의 응용가능성이 매우 큰 것으로 알려져 있다. 기존의 연구는 In2O3에 SnO2, Al2O3, Ga2O3 등을 혼합하여 화합물 형태의 투명전극 소재를 개발하고, 전도성 및 투과율 등을 개선시키는데 초점이 맞춰져왔다. 최근에 들어서 나노스케일 물질의 제조 기술 개발로 낮은 차원의 In2O3 나노구조는 센서나 발광다이오드와 같은 전자기기의 제작을 위해서 연구 되었는데, 본 논문에서는 Carbon을 doping하여 p-형 반도체로의 응용 가능성을 고찰하였다. 본 논문에서는 In2O3:C 박막을 radio-frequency magnetron sputtering 방법으로 sapphire(0001) 기판위에 증착하였다. 통상적으로 ceramic target에 carbon을 혼합하여 sintering하여 제작한 ceramic target 대신, In2O3 powder와 CNT를 혼합하여 powder형태의 sputter target을 사용하였다. 박막의 증착 초기에는 매우 평평한 층구조로 성장하였고, 박막의 두께가 증가함에 따라 섬조직이 생성되기 시작하여 표면거칠기가 매우 크게 증가하였다. 박막의 두께가 500 nm 이상이 되면 나노 피라미드가 생성되는데, 이는 In2O3의 결정구조에 기인한 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.606-610
• /
• 2019

In this study, we demonstrated that the nonenzymatic glucose sensor based on the flexible carbon fiber bundle electrode with BDD nanocomposites (CF-BDD electrode). As a nano seeding method for the deposition of BDD on flexible carbon fiber, electrostatic self-assembly technique was employed. Surface morphology of BDD coated carbon fiber electrode was observed by scanning electron microscopy. And the electrochemical characteristics were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. This CF-BDD electrode exhibited a large surface area, a direct electron transfer between the redox species and the electrode surface and a high catalytic activity, resulting in a wider linear range (3.75~50 mM), a faster response time (within 3 s) and a higher sensitivity (388.8 nA/mM) in comparison to a bare CF electrode. As a durable and flexible electrochemical sensing electrode, this brand new CF-BDD scheme has promising advantages on various electrochemical and wearable sensor applications.

• Composites Research
• /
• v.34 no.6
• /
• pp.387-393
• /
• 2021

This paper investigated the electrical properties of multiwall carbon nanotube reinforced polydimethylsiloxane (CNT-PDMS) strain sensors with copper electrodes on the wet-etched surface. MWCNT-PDMS strain sensors were fabricated according to the wt% of MWCNT. Surfaces on the electrode area were wet-etched with various etching duration and silver epoxy adhesives were spread on the wet-etched surface. Finally, we attached the copper electrodes to the MWCNT-PMDS strain sensors. We checked the electric conductivities by the two-probe method and sensing characteristics under the cyclic loading. We observed the electric conductivity of MWCNT-PDMS strain sensors increased sharply and the scattering of the measured data decreased when the surface of the electrode area was wet-etched. Initial resistances of MWCNT-PDMS strain sensors were inversely proportion to wt% of MWCNT and the etching duration. However, the resistance changing rates under 30% strain increased as wt% of MWCNT and the etching duration increased. Decreasing rate of the electric resistance change after 100 repetitions was smaller when wt% of MWCNT was larger and the etching duration was short. This was due to the low initial resistance of the MWCNT-PMDS strain sensors by the wet-etching.

• Composites Research
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2017

Damage sensing of polymer composite films consisting of poly(dicyclopentadiene) p-DCPD and carbon nanotube (CNT) was studied experimentally. Only up to 1st ring-opening polymerization occurred with the addition of CNT, which made the modified film electrically conductive, while interfering with polymerization. The interfacial adhesion of composite films with varying CNT concentration was evaluated by measuring the wettability using the static contact angle method. 0.5 wt% CNT/p-DCPD was determined to be the optimal condition via electrical dispersion method and tensile test. Dynamic fatigue test was conducted to evaluate the durability of the films by measuring the change in electrical resistance. For the initial three cycles, the change in electrical resistance pattern was similar to the tensile stress-strain curve. The CNT/p-DCPD film was attached to an epoxy matrix to demonstrate its utilization as a sensor for fracture behavior. At the onset of epoxy fracture, electrical resistance showed a drastic increase, which indicated adhesive fracture between sensor and matrix. It leads to prediction of crack and fracture of matrix.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.47-52
• /
• 2012

Porous carbon nanofibers were prepared as a gas sensor electrode to study the $CO_2$ sensing property based on effects of porosity and introduced amine functional groups. Electrospun fibers were obtained by using electrospinning method with polyacrylonitrile precursor and they were treated by the thermal treatment and chemical activation. Amine functional groups were introduced by the liquid state treatment using diethylenetriamine. The specific surface area increased up to $2000m^2/g$ by the chemical activation. The Introduced amine functional group was identified using FT-IR spectroscopy. $CO_2$ gas sensing property was improved as four folds via introduced amine functional groups on the activated carbon nanofiber. In conclusion, the gas sensing property was improved based on the developed porosity by the chemical activation and the chemical attraction of $CO_2$ gas by introduced functional groups.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.10
• /
• pp.773-777
• /
• 2009

In this study, the strain sensing characteristics of single-wall carbon nanotubes(SWCNTs) networks were investigated to develop a film sensor for strain sensing. The SWCNTs film are formed on flexible substrates of poly(ethylene terephthalate) (PET) using spray process. In this manner we could control the transparency and obtain excellent uniformity of the networked SWCNT film. The carbon nanotube film is isotropic due to randomly oriented bundles of SWCNTs. Using experimental results it is shown that there is a nearly linear change in resistance across the film when it is subjected to tensile stress. The results presented in this study indicate the potential of such films for high sensitive transparent strain sensors on macro scale.

• Journal of Industrial Technology
• /
• v.34
• /
• pp.39-43
• /
• 2014

This paper represents a highly porous MWCNT film electrode with interconnected open pores and demonstrated the possibility of using an MWCNT network film as the top electrode for polyimide capacitive humidity sensors. Polyimide humidity sensors with MWCNT electrodes exhibited about 6 times faster response than equivalent Cr electrode sensors. This result may be due to their percolated pore structures, which make water molecules accessible to all polyimide surfaces. The much faster response times of MWCNT electrode sensors is attributed to the percolated pore network, which allows more water molecules to be accessible to polyimide surfaces.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1643-1644
• /
• 2006

본 논문에서는 마이크로/나노 다공질 실리콘 기판에 여러 형태의 전극을 형성하여 혈액 중의 요소, 콜레스테롤, AST, ALT 농도를 검출하는 바이오센서를 제각하고, 그 특성을 고찰하였다. 다공질 실리콘에 제작된 전극들은 모두 평면전극에 비해서 높은 감도증가를 나타내었는데, 이것은 다공질 실리콘 구조를 통한 유효전극면적의 증가에 기인하는 것으로 생각된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.625-640
• /
• 2023

This paper propose a circuit that can measure the inductance of an inductive sensor used in IOT applications. The circuit was constructed using the characteristics of an RL low-pass filter circuit, comparator, current control switch, and capacitor, and the inductance value within the range 1[nH] < L ≤ 1[H] can be derived through the duration time during the output voltage of the RL low-pass filter circuit is greater than the reference voltage.