• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.194-199
• /
• 2012

In this study, for increasing the efficiency of solar collector, the thermal conductivities and viscosities of the pure water and ethanol oxidized multi-walled carbon nanofluids were measured. Nanofluids were manufactured by ultra-sonic dispersing oxidized multi-walled carbon nanotubes(OMWCNTs) in the pure-water and ethanol at the rates of 0.0005 ~ 0.1 vol%. the Thermal conductivities and viscosities of manufactured nanofluids were measured at the low temperature($10^{\circ}C$), the room temperature($25^{\circ}C$) and the high temperature($70^{\circ}C$). For measuring thermal conductivity and viscosity, we used Transient Hot-wire Method and Rotational Digital Viscometer, respectively. As a result, under given temperature conditions, thermal conductivity of the 0.1 vol% pure-water nanofluid improved 7.98% ($10^{\circ}C$), 8.34% ($25^{\circ}C$), and 9.14% ($70^{\circ}C$), and its viscosity increased by 37.08% ($10^{\circ}C$), 33.96% ($25^{\circ}C$) and 21.64% ($70^{\circ}C$) than the base fluids. Thermal conductivity of the 0.1 vol% ethanol nanofluids improved 33.72% ($10^{\circ}C$), 33.14% ($25^{\circ}C$), and 32.36% ($70^{\circ}C$), and its viscosity increased by 37.93% ($10^{\circ}C$), 31.92% ($25^{\circ}C$) and 29.42% ($70^{\circ}C$) than the base fluids.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.156-156
• /
• 1999

자성박막에 존재하는 자기구역의 형상 및 동력학은, 자성박막의 학문적 연구와 응용기술 개발의 핵심을 제공하는 매우 중요한 분야의 하나로서, 최근 크게 관심이 고조되고 있다. 본 연구에서는 차세대 광자기 재질로 각광받고 있는 Co/Pd 다층박막에서의 자기구역 형상 및 자기구역 동력학을 연구하였다. 전자빔 진공증착 시스템을 사용하여, Co 층의 두께와 Pd층의 두께, 그리고 전체 층수가 변화하는 일련의 Co/Pd 다층박막 시료를 제작하였다. 제작된 모든 시료가 명목두께에 대하여 4%의 정밀도로 제작되었음을 확인하였고, 제작된 시료의 자기 및 광자기 성질은 자기이력곡선 등을 측정하였다. 또한 고성능 광자기 Kerr 현미경 시스템을 이용하여 자성박막에 존재하는 자기구역의 형상 및 자기구역 동력학을 관찰하였다. 이 장비는 1,000배의 배율에서 0.3$\mu\textrm{m}$의 공간분해능을 가지며 실시간 자기구역 영상을 CCD 카메라를 통해 컴퓨터에 저장함으로써, 자지구역 거동현상을 관찰할 수 있다. 자성다층박막에 존재하는 자기구역의 형상을 이론적으로 예측하기 위하여, 다층박막 구조에서의 정자기 에너지를 일반적으로 계산할 수 있는 이론을 유도하였다. 이 이론을 통해 다층박막의 자성층의 두께가 두꺼워짐에 따라, 자기구역의 형상이 단일 자기구역 형상에서 줄무늬 자기구역 형상으로 천이함을 예측할 수 있었고, 이러한 지구구역 천이현상을 Co-Pd 다층박막의 자화역전현상을 연구하였고, 새로운 자구동력학 정량분석기술을 개발하여 Co/Pd 다층박막에 적용함으로써 자화역전의 자구벽 이동속도와 핵형성 확률을 각각 정량적으로 구하였다. 이러한 관찰 및 분석기술을 통하여, Co/Pd 다층박막의 층구조에 따라 대조적인 자화역전현상이 존재함을 관찰하였다. 이러한 대조적인 자화역전현상을 결정짓는 요인을 연구하기 위해서 나노자성학이온을 이용한 자화역전현상을 결정짓는 요인을 연구하기 위해서 나노자성학이온을 이용한 자화역전모델을 개발하였으며, 이를 통하여 자성박막의 거시적 자기성질에 의해 이러한 대조적인 자화역전모델을 개발하였으며, 이를 통하여 자성박막의 거시적 자기성지에 의해 이러한 대조적인 자화역전현상이 결정될 수 있음을 설명하였다. 또한, 미시적 자기이력곡선 측정을 통하여 자성박막구조에 따른 국소적인 구조불균일성을 관찰하였고, 이러한 구조불균일성 또한 대조적인 자화역전현상을 결정하는 큰 요인임을 논의하였다.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.250-256
• /
• 2014

Polypropylene (PP) composites containing conductive multi-walled carbon nanotube (MWNT) and stainless steel short fiber (SSF) were manufactured using a twin screw extruder and characterized their surface resistivity and mechanical properties in this work. Surface resistivity measurements showed that the percolation threshold appeared at a lower MWNT loading when a small amount of SSF was added to PP/MWNT composites. Tensile modulus and strength of the composites increased but elongation-at-break decreased greatly compared to pure PP. Also, the effects of MWNT and SSF on storage modulus and tan ${\delta}$ from dynamic mechanical analysis for the composites were examined, and the morphologies of fractured surface and the fillers were observed using a scanning electron microscope.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.141-141
• /
• 2018

Copper is one of the most abundant metals on earth. Its oxide (CuO) is an intrinsically p-type metal-oxide semiconductor with a bandgap ($E_g$) of 1.2-2.0 eV 1. Copper oxide nanomaterials are considered as promising materials for a wide range of applications e.g., lithium ion batteries, dye-sensitized solar cells, photocatalytic hydrogen production, photodetectors, and biogas sensors 2-7. Recently, high-density and uniform CuO nanostructures have been grown on Cu foils in alkaline solutions 3. In 2011, T. Soejima et al. proposed a facile process for the oxidation synthesis of CuO nanobelt arrays using $NH_3-H_2O_2$ aqueous solution 8. In 2017, G. Kaur et al. synthesized CuO nanostructures by treating Cu foils in $NH_4OH$ at room temperature for different treatment times 9. The surface treatment of Cu in alkaline aqueous solutions is a potential method for the mass fabrication of CuO nanostructures with high uniformity and density. It is interesting to compare the gas sensing properties among CuO nanomaterials synthesized by this approach and by others. Nevertheless, none of above studies investigated the gas sensing properties of as-synthesized CuO nanomaterials. In this study, CuO nanowalls versus nanoparticles were synthesized via the oxidation process of Cu foil in NH4OH solution at $50-70^{\circ}C$. The gas sensing properties of the as-prepared CuO nanoplates were examined with $C_2H_5OH$, $CH_3COCH_3$, and $NH_3$ at $200-360^{\circ}C$.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.17-22
• /
• 2011

Polypropylene/multi-walled carbon nanotube(PP/MWCNT) composites along with various MWCNT contents up to 20 wt% were prepared by a twin screw extruder. Nanocomposites having 20 wt% MWCNT as a master batch(M/B) were diluted with PP by way of melt compounding. The electrical/thermal conductivity, morphology, thermal/viscoelastic/mechanical properties were investigated with the variation of MWCNT contents. Also, we compared some properties between 1-step PP/MWCNT and the diluted PP/MWCNT composites. The percolation threshold of electrical and thermal conductivity was measured at about 3 wt% MWCNT. And conductivity of diluted PP/MWCNT composites were superior to those of PP/MWCNT composites. The non-isothermal crystallization temperature and thermal decomposition temperature appeared at higher temperatures with increasing MWCNT contents. Morphology showed that length of MWCNT in diluted PP/MWCNT composites was shortened by twice melt blending, which contributed to improve the tensile strength of PP/MWCNT composites.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.4
• /
• pp.274-279
• /
• 2008

In the perspective of saving energy in buildings, high performance of insulation and air tightness for improving the heating and the cooling efficiency has brought the positive effect in an economical view. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and it is also very harmful to residents because they spend over 90% of their time in the indoor area. Therefore, the ventilation is important to keep indoor environment clean and it can also save energy consumption. In this study, a HEPA type breathing wall is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. To make fine porous structures, polymer nano fibers which were made by electro spinning method are used as a precursor. The nano fibers are coated with SiO2 nano particles and finally the HEPA type breathing wall is made by sintering in the electric furnace at $300\sim500^{\circ}C$. The pressure drops of nano ceramic structure are 8.2, 25.5 and 44.9 mmAq at the face velocity of 2.0, 5.9 and 8.8 cm/s, respectively. Also the water vapor permeability is $3.6g/m^2{\cdot}h{\cdot}mmHg$. In this research, the porous nano ceramic structures are obtained and the possibility for the usage of a material for HEPA type breathing wall can be obtained.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.11-18
• /
• 2020

Carbon nanotubes are used in various industries with their excellent mechanical properties and electrical conductivity. In the construction industry, research is being conducted to give self-sensing capabilities to structures, but the results of experiments vary among researchers, and the analysis is insufficient. Therefore, in this study, the hydration and electrical properties of MWCNT-added cement pastes were measured. The electrical resistance values of hydration heat, porosity, Rietveld quantitative analysis, compressive strength, and distance were measured.. The heat resistance, porosity, Rietvelt quantitative analysis, compressive strength and distance were measured according to electrical resistance. Experimental results showed that the heat of hydration decreased with increasing MWCNT. XRD Rietveld quantitative analysis showed that there was no significant difference in the amount of hydration products with increasing addition rate of MWCNT. As a result of SEM analysis, the MWCNT is agglomerated by van der Waals forces, and this area is considered to be caused by voids and weak areas. The electrical resistance value decreases as the addition rate is increased, and thus may play a role for magnetic sensing in the future.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.215-221
• /
• 2005

A Fe-containing mesoporous silica (Fe-MCM-41) in which part of Si in the framework was replaced by Fe(Si-O-Fe) has been successfully prepared using $Fe^{3+}$ salt by a direct synthesis route. Physical properties of the material were characterized by XRD, $N_2$ adsorption, SEM/TEM, UV-vis and FT-IR spectroscopies. Fe-MCM-41 exhibited high catalytic activity in phenol hydroxylation using $H_2O_2$ as oxidant, giving phenol conversion of ca. 60% at $50^{\circ}C$ [phenol : $H_2O_2$ = 1:1, water solvent]. Fe-MCM-41 was also applied to the growth of CNTs, utilizing a thermal-CVD reactor using acetylene gas, which demonstrated that multi-wall CNTs could be prepared efficiently using the Fe-MCM-41 catalyst.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.72-72
• /
• 2010

탄소나노튜브(carbon nanotubes : CNTs)는 뛰어난 전기적, 물리적인 특성을 가지고 있기 때문에 다양한 분야에서 이를 활용하려는 노력들이 활발히 이루어지고 있다. CNTs의 전기적인 특성은 직경에 의해 결정되므로, 직경을 균일하게 제어하는 일이 CNTs를 기반으로 한 전자소자 응용에 가장 중요한 사항이라 할 수 있다. 일반적으로 화학기상증착법(chemical vapor deposition, CVD)으로 합성된 CNTs의 직경은 촉매의 크기에 의존하기 때문에, 촉매의 크기를 제어하기 위한 다양한 연구들이 활발히 진행되고 있다[1-3]. 하지만 CNTs의 성장온도 근처에서 촉매 입자는 표면 확산(surface diffusion)에 의해 응집(agglomeration)되기 때문에 작고 균일한 크기의 촉매를 얻기 어렵다. 본 연구에서는 Si(001) 기판 위에 지지층(supporting layer)인 Al의 두께를 변화시켜 증착하고, 열적산화과정을 통해 $Al_2O_3$ 층을 형성한 후 Fe을 증착하여 CNTs를 합성하였다. $Al_2O_3$ 지지층과 Fe 촉매입자의 구조와 화학적 상태를 원자힘현미경 (atomic force microscopy, AFM), 주사전자현미경 (scanning electron microscopy, SEM), 투과전자현미경 (transmission electron microscopy, TEM), X-선 광전자 분광기(X-ray photoelectron spectroscopy)를 통해 분석하였고, 성장된 CNTs는 SEM, TEM, 라만 분광법 (Raman spectroscopy)을 통해 분석하였다. 그 결과, $Al_2O_3$ 층은 두께에 따라 각기 다른 표면 거칠기(RMS roughness)와 결정립(grain)의 크기를 갖게 되며, 이러한 표면구조가 Fe 촉매입자의 표면확산에 의한 응집에 관여하여 CNTs의 직경에 영향을 미치는 것을 확인하였다. 또한 $Al_2O_3$ 지지층의 두께가 15 nm인 경우, Fe의 응집현상이 억제되어 좁은 직경분포를 지닌 고순도 단일벽 탄소나노튜브(Single-walled CNTs)가 성장되는 것을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1465-1471
• /
• 2013

The electrical and mechanical properties of room temperature vulcanized (RTV) silicone rubber composites are investigated as functions of multi-walled carbon nanotube (CNT), carbon black (CB), and thinner content. The thinner is used to improve the CNT and CB dispersion in the matrix. The electrical and mechanical properties of the composite with CNT are improved when compared to the composite with CB at the same content. As the thinner content is 80 phr, the electric resistance of the composite decreases significantly with the CNT content and shows contact point saturation of CNT at 2.5 phr. As the thinner content increases, the dispersion of conductive particles improves; however, the critical CB content increases because of the reduction in the CB weight ratio. It is believed that an electrode that needs good flexibility and excellent electrical properties can be manufactured when the amount of CNT and CB are increased with the thinner content.