• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.415-423
• /
• 2008

Earth outer core is composed of iron mainly with some diluent elements, which account for the observed ca. 10% density deficit compared to the pure iron. Among candidates as the light diluents, hydrogen and oxygen were selected, and the thermodynamic stability of the following reaction was calculated; hematite + hydrogen $\to$ goethite + iron. At ambient conditions, Gibb's free energy of this reaction is 12.62 kJ/mol. On increasing pressure at room temperature, it decreases to zero at 0.068 GPa. This energy decreases at constant rate down to 200 GPa, which shows -208.26 kJ/mol at that pressure. From these results, this chemical reaction prefers the reduction environment forming the iron element and iron oxyhydroxide, so possible presence of iron oxyhydroxide with iron at proto-core can not be ruled out.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.125-131
• /
• 2009

Reductive dechlorination of polychlorinated dibenzo-p-dioxins (PCDDs) and its toxicity change were predicted by the linear free energy relationship (LFER) model to assess the zero-valent iron (ZVI) and anaerobic dechlorinating bacteria (ADB) as electron donors in PCDDs dechlorination. Reductive dechlorination of PCDDs involves 256 reactions linking 76 congeners with highly variable toxicities, so is challenging to assess the overall effect of this process on the environmental impact of PCDD contamination. The Gibbs free energies of PCDDs in aqueous solution were updated to density functional theory (DFT) calculation level from thermodynamic results of literatures. All of dechlorination kinetics of PCDDs was evaluated from the linear correlation between the experimental dechlorination kinetics of PCDDs and the calculated thermodynamics of PCDDs. As a result, it was predicted that over 100 years would be taken for the complete dechlorination of octachlorinated dibenzo-p-dioxin (OCDD) to non-chlorinated compound (dibenzo-p-dioxin, DD), and the toxic equivalent quantity (TEQ) of PCDDs could increase to 10 times larger from initial TEQ with the dechlorination process. The results imply that the single reductive dechlorination using ZVI or ADB is not suitable for the treatment strategy of PCDDs contaminated soil, sediment and fly ash. This LFER approach is applicable for the prediction of dechlorination process for organohalogen compounds and for the assessment of electron donating system for treatment strategies.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.602-611
• /
• 2014

The critical micelle concentration (CMC) of the zwitterionic surfactant of dodecyldimethyl(3-sulfopropyl)ammonium hydroxide(LSB, $CH_3(CH_2)_{11}N^+(CH_3)_2(CH_2)_3SO{_3}^-$) and LSB/Tween-20, LSB/Tween-40, LSB/Tween-80 and LSB/DTAB, LSB/TTAB, LSB/CTAB mixed surfactant systems were determined by using the UV/Vis absorbance method from 284 K to 312 K. And the effects of temperature on the micellization have been measured for the thermodynamic study. The results show that the measured values of gibbs free energy are all negative in the whole measured. The values of enthalpy are positive Tween-20, And negative other surfactants. but the values of entropy are positive in the whole measured temperature region. The results show that all of the thermodynamic parameters are dependent on temperature and alkyl-group's length.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.381-382
• /
• 2015

배터리의 열역학적 인자, 즉, 엔탈피, 엔트로피, 깁스 자유 에너지는 배터리의 상태인 SOH (State Of Health)를 추정하는 데 있어서 매우 밀접한 관련이 있으며, 정밀한 측정을 필요로 한다. 이러한 열역학적 인자 중 엔트로피의 측정이 중요한데 ETM (Electrochemical thermodynamics measurements) 방법이 대표적으로 사용되고 있다. 본 논문에서는 기존 ETM 방법을 설명하고, 이를 보완한 새로운 엔트로피 측정 방법을 제안하며, 실험을 통해 유효성을 입증한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.70.2-70.2
• /
• 2010

고순도 금속규소는 반도체, 태양전지 및 규소화 화합물 등의 원료로 사용되어왔으며, 최근 태양전지 시장 확대로 인해 고순도 금속규소의 수요가 증가하고 있다. 그러나 전량 수입 중인 고순도 금속규소의 수급 안정성과 품질 균일성 등이 문제가 되고 있어, 고순도 생산 공정 및 생산 에너지를 절감 공정에 관한 연구 개발이 필요한 실정이다. 이에 본 연구에서는 금속규소의 원료인 규석(SiO2)과 카본(C)의 환원반응을 온도와 압력별로 살펴보고, 평형 상태의 금속규소수율 조건을 알아보았다. 그리고 아크로 내부 위치에 따른 산화/환원 반응식을 고찰하여 주요 반응식의 깁스 자유 에너지를 비교 분석 하였다. 본 해석을 통한 실험용 아크로 제작과 기초실험을 통해 금속 규소 생산 수율 및 순도를 평가하였으며, 생산된 실리콘의 최대 순도는 약 99.8%로 측정되었다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.18-19
• /
• 2002

Si 웨이퍼제조 시 나오는 페슬러지에서 SiC 연마재와 절삭유를 분리해내면 Si 분말을 얻을 수 있다. 본 연구에서의 SiC는 폐슬러지 Si 분말에 C 분말을 혼합하여 제조할 수 있다. Si-C-O 3성분계는 Si, $SiO_2$, SiC, C 4개의 응축상과 CO, SiO, $CO_2$, $O_2$ 4개의 기체상이 가능하고 생성물들 간의 평형관계를 깁스 자유에너지에 의해 평형 반응식이 계산되어질 수 있다. 계산된 평형 반응식은 2개의 SiO, CO 분압이 각각 X, Y 좌표평면에 나타나는 상안정도를 그려볼 수 있다. 상안정도에서 자유도가 2인 경우는, $SiO_2$가 불안정하므로 SiC와 C가 공존하는 영역에서 온도를 독립 변수로 놓으면 나머지 독립 변수는 SiO 나 CO 기체 분압 둘 중 하나가 되어 하나의 직선으로 나타낼 수 있다. 직선을 경계로 각 응축상들의 안정영역을 하나의 좌표평면에 나타낸 후 온도에 따른 SiC의 안정영역을 알아본다.

• Journal of Hydrogen and New Energy
• /
• v.16 no.3
• /
• pp.244-252
• /
• 2005

It is very interesting and important in the academic point of view and in practical use the hydrogen-induced phase separation(HIPS) which appears during hydrogen heat treatment. Since hydrogen can be removed very fast by pumping it out the hydrogen-induced new lattice phase which can not be obtained without hydrogen can be preserved as meta-stable state. In this study it has been investigated whether the HIPS appear in Pd-Al, Pd-Co, Pd-Cr, Pd-Ti, Pd-V and Pd-Zr alloys and discussed thermodynamic representation of the HIPS. The Pd alloys were arc-melted under argon atmosphere and remelted 4 or 5 times for homogenization. The alloys were annealed at 600$^{\circ}C$ under vacuum for 24 hrs and then subjected to pressure-composition isotherm measurements at 100$^{\circ}C$. The hydrogen heat treatment(HHT) of samples was carried out at 600$^{\circ}C$ under hydrogen pressure of 70 bar for 6 days and PC isotherms at 100$^{\circ}C$ were measured. By comparing the PC isotherms measured before and after HHT, occurrence of phase separation was determined. The experimental results showed that the HIPS appeared only in Pd-0.05Co alloy. For Pd-Co alloys with various composition the PC isotherms were measured. By adopting Park-Flanagan model for ternary thermodynamics the Gibbs free energy change for Pd-Co-H solid solution was calculated and subsequently with this the HIPS in Pd-Co alloy was explained fairly.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.598-603
• /
• 2023

Electrochemical ammonia production using catalysts offers a promising alternative to the conventional Haber-Bosch process, allowing for ambient temperature and pressure conditions, environmentally friendly operations, and high-purity ammonia production. In this study, we focus on the nitrogen reduction reactions occurring on the surfaces of ruthenium catalysts, employing first-principles calculations. By modeling reaction pathways for nitrogen reduction on the (0001) and (1000) surfaces of ruthenium, we optimized the reaction structures and predicted favorable pathways for each step. We found that the adsorption configuration of N₂ on each surface significantly influenced subsequent reaction activities. On the (0001) surface of ruthenium, the end-on configuration, where nitrogen molecules adsorb perpendicularly to the surface, exhibited the most favorable N₂ adsorption energy. Similarly, on the (1000) surface, the end-on configuration showed the most stable adsorption energy values. Subsequently, through optimized hydrogen adsorption in both distal and alternating configurations, we theoretically elucidated the complete reaction pathways required for the final desorption of NH₃.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.679-686
• /
• 2019

Characteristics of adsorption equilibrium, kinetic and thermodynamic of aniline blue onto activated carbon from aqueous solution were investigated as function of initial concentration, contact time and temperature. Adsorption isotherm of aniline blue was analyzed by Langmuir, Freundlich, Redlich-Peterson, Temkin and Dubinin-Radushkevich models. Langmuir isotherm model fit better with isothermal data than other isotherm models. Estmated Langmuir separation factors ($R_L=0.036{\sim}0.068$) indicated that adsorption process of aniline blue by activated carbon could be an effective treatment method. Adsorption kinetic data were fitted to pseudo first order model, pseudo second order model and intraparticle diffusion models. The kinetic results showed that the adsorption of aniline blue onto activated carbon well followed pseudo second-order model. Adsorption mechanism was evaluated in two steps, film diffusion and intraparticle diffusion, by intraparticle diffusion model. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy for adsorption process were estimated. Enthalpy change (48.49 kJ/mol) indicated that this adsorption process was physical adsorption and endothermic. Since Gibbs free energy decreased with increasing temperature, the adsorption reaction became more spontaneously with increasing temperature. The isosteric heat of adsorption indicated that there is interaction between the adsorbent and the adsorbate because the energy heterogeneity of the adsorbent surface.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.364-372
• /
• 2011

The corrosion inhibition of imatinib mesylate (IMT) on mild steel in 0.25 M sulphuric acid has been studied using gravimetric and potentiodynamic polarization techniques at various concentrations of inhibitor, temperature and fluid velocities. The results obtained showed that, inhibition efficiency (% IE) increases with increasing concentration of the inhibitor. The adsorption process on mild steel surface follows Langmuir adsorption isotherm. The values of Gibbs free energies of adsorption obtained suggest that, the adsorption process of IMT on mild steel is chemisorption. Thermodynamic parameters were evaluated and discussed. The electron orbital density distribution of HOMO and LUMO of IMT was used to discuss the inhibition mechanism. FT-IR spectroscopy and SEM images were used to analyze the surface adsorbed film.