The degree of purification and the macrostructure of high purity aluminium were studied through the alternate stirring method in order to improve the nonuniformity of solute concentration in the unidirectional stirring method. The $2^3$ factorial design was done to examine the effects of experimental factors more qualitatively. In the relatively low stirring speed of 1500 rpm with alternate stirring mode, the uniform solute profile and refined grain structure were obtained due to strong washing effect and turbulent fluid flow. It was induced by the transition of the momentum boundary layer by alternation of the stirrer. It was concluded from this study that the alternate stirring mode was more effective to obtain the uniformity of solute even in the stirring speed of 1500 rpm. But the degree of purification decreased below the critical alternating period. When 2N(99.8wt.%) aluminium was used as the starting material the morphology of solid-liquid showed the cellular shape and the columnar grains were inclined to the direction of rotation. This inclined grain growth resulted from the difference of relative velocities of solid and liquid. The inclined angle was increased as the stirring speed increased and solidification proceeded. In the case of 4N aluminium, there was no inclined grain growth and it was confirmed from the macrostructure and SEM work that the morphology of solid-liquid interface was planar. From the factorial design, it was found that the alternate stirring mode showed poorer purification effect than that of unidirectional stirring mode at low speed(500 rpm). In addition, the factor that had the most significant effect on the degree of purification was the stirring speed.
PU계 유겔화제를 제조하기 위하여 soft segment로서 친유성을 갖는 polyether계 polyol인 PPG와 PTMG를 사용하고 hard segment로는 TDI를 사용하였다. PPG와 PTMG의 평균 분자량을 각각 1000, 2000, 3000으로 변화시키며 실험한 결과, PPG의 경우 분자량이 증가할수록 유겔화율은 290%에서 130%로 감소하였으며, PTMG의 경우 분자량이 증가할수록 310%에서 250%로 감소하였다. 친수성인 EG를 투입한 경우에 유겔화율은 EG를 첨가하지 않은 경우보다 약 2배 증가하였다. 이는 친수성기의 함량이 증가할수록 물/기름 혼합물에서의 prepolymer의 분산도 증가에 기인한 것으로 판단되며 PPG의 유겔화율은 290%에서 1120%로 증가하였고, PTMG의 유겔화율은 310%에서 1310%로 증가하였다.
심장은 생명의 가장 중요한 장기 중 하나이며, 이 중요성은 인공심장의 연구를 불러일으켰다. 본 고에서는 전세계적으로 연구되는 인공 심장 제어의 방법론, 추세 그리고 현 상황을 비교 분석하였다. 인공 심장 개발에 있어서 중요한 연구 분야 중 하나인 인공 심장 제어는 자연 심장의 역할을 최대한 모방하여야 하는데 현실적으로 각종 생리적 제어 인자를 얻기에는 센서 기술의 한계가 있다. 따라서 인공 심장을 위한 많은 제어 변수가 연구되었으나, 단지 몇 가지만 실제로 적용되는 상태이다. 본고에서는 왜 다른 요인들이 제외되었으며 무엇이 현재 제어 방식의 선택 기준으로 고려되었는지를 설명한다. 이것을 설명하기 위하여 인공 심장의 제어에 앞서서 자연 심장의 제어를 짧게 설명하고, 5개의 대표적인 인공 심장 제어 연구 조직을 선정하여 소개와 정리를 하였다.
Purpose: This study examined the effect of EMG-stim related to the functional recovery of the upper extremity in chronic stroke patients with an intensive massed practice protocol. Methods: The subjects were assigned randomly to either the EMG-stim group (n=10) or sham treatment group (n=10). Both groups received conventional physical therapy, occupational therapy and FES, five times per week over a four week period. In the EMG-stim group, EMG-stim was applied to the hemiplegic wrist and finger extensors for 2 sessions for 30 minutes per day, 5 times per week over a 4 week period. As the pre- and the post-test, the following four motor tests were assessed as the function of the upper extremity clinical functional test: extensor digitorum strength test, Box and Block test, Fugl-Mayer Assessment, and Jebson-Taylor Hand Function Test. Results: In the Box and Block test and Fugl-Mayer Assessment, there were statistically significant differences between both groups as well as between pre- and post-test. The extensor digitorum and wrist extensor strength were similar in both groups. In the Jebson-Taylor Hand Function Test, there was a significant difference in simulated page turning but not in the other subtests. Conclusion: Intensive massed practice with EMG-stim intervention applied to the hemiplegic upper extremity is an effective therapeutic method for chronic stroke patients. However, a variety of intervention methods designed for stroke patients in clinical settings are needed.
The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.
기존의 유압실험장치는 단순히 유압회로도만을 구성하도록 되어 있기 때문에 수업시 학생들의 흥미를 유발시키지 못하면서 강의 효과를 떨어뜨리고 있는 실정이다. 따라서, 본 논문에서는 기계공학실험중 유압실험에 관한 공학교육의 효과를 높이기 위해 학생들이 눈으로 쉽게 유동을 파악할 수 있는 유압시스템을 개발하였다. 이를 위하여 유압구성품은 아크릴로 정밀가공을 하여 투명성을 유지시켜 주었고, 기존의 불투명한 관은 투명하면서 유연한 관으로 교체하였다. 유체의 흐름을 눈으로 확인할 수 있도록 적색의 오일을 사용하였다. 더 나아가 제작된 유압장치를 이용하여 이론수업시 OHP와 함께 사용한다면 밸브의 구조를 명확히 이해할 수 있는 장점을 가지고 있다. 개발된 비주얼 유압 시스템을 이용한다면 유압 분야의 기본 이론이나 원리를 쉽게 이해시킬 수 있어 학생들의 학습증진에 기여할 수 있고 교과목의 목적을 충분히 구현할 수 있어 그 교육 효과가 매우 클 것으로 기대된다.
심실보조장치(ventricular assist device, VAD)는 그 특성상 손상된 자연심장의 기능을 보조하기 위해서 사용된다. 따라서, 심실보조장치의 제어 알고리즘을 고려할 때에는 가능한 한 자연심장에 걸리는 부하를 최소한으로 줄여주는 것이 중요하다. 이처럼 자연심장에 걸리는 부하를 줄여주기 위해 가장 일반적으로 사용되는 제어 방식이 바로 자연심장과 심실보조장치 상호간의 동시 박출을 방지하는 counterpulsation 제어 방식이다. 실제로 Nanas[1][2] 등은 동물실험을 통해 좌심실이 손상된 상황에서 counterpulsation 장cl가 혈류역학적으로 어떠한 영향을 미치는가를 연구하였다 본 연구에서는, 현재 서울대학교 인공심장연구실과 (주)바이오메드랩에서 공동으로 개발 중인 이동작동기형 심실보조장치 (AnyHeart/ sup TM/)에 사용할 수 있는 counterpulsation 제어 알고리즘을 개발하고. 개발된 알고리즘을 실제 동물 실험에 적용하기에 앞서 모의순환장치를 이용하여 개발된 알고리즘의 효용성을 검증하여 보았다. 자연심장의 박출 상태를 실시간으로 파악하기 위해 심전도(electrocardiogram, ECG) 신호를 입력으로 받아들여 제어를 수행하는 방식을 채택하였으며, 모의순환장치에서의 실험 결과 심실보조장치와 자연심장 간의 동시 박출 방지 효과가 정상적으로 일어남을 확인할 수 있었다.
Purpose: The properties of starch and starch gel prepared from a newly inbred sweet potato, Daeyumi were compared to the properties of starch and starch gel prepared from Sinyulmi which is a well known mealy type sweet potato. Methods: The starch was isolated by using the alkaline steeping method. Physicochemical, pasting, and thermal properties, and crystallinity were measured. The texture properties of starch gel (10%, w/w) were examined. Results: The amylose contents of Daeyumi and Sinyulmi starches were 25.57% and 22.59%, respectively. The initial pasting temperature of Daeyumi starch was significantly higher than that of Sinyulmi starch (p<0.05), but other paste viscosities were not different. The peak and conclusion temperatures of Daeyumi starch were higher than those of Sinyulmi starch by differential scanning calorimetry. The shape of Daeyumi starch gel was more clear and rigid than the shape of Sinyulmi starch gel. The surface and the upper side of Daeyumi starch gel were smoother than the surface and the upper side of Sinyulmi starch gel. Hardness and gumminess were higher in Daeyumi starch gel than in Sinyulmi starch gel. The crystallinity types of Daeyumi and Sinyulmi starches were $C_b$ and A types, respectively, but starch gels showed an amorphous type. Conclusion: Therefore, it is suggested that Daeyumi starch would have better physicochemical properties and higher quality of starch gel than Sinyulmi starch.
Purpose: To increase the availability of Korean sweet potato (SP), the quality characteristics of the sweet potato pastes (SPPs) and rice madeira cake (RMC) using them were investigated. Methods: Ten different SPPs, orange fleshed Sinwhangmi, Juwhangmi, purple fleshed Sinjami and Yeonjami, Cream fleshed Sinyulmi, Sinchunmi, and newly developed Geonwhangmi, Dahomi, Daeyumi, and Pongwonmi were used. Their pastes were prepared by washed, peeled, steamed, crushed, vacuum packed and stored in a freezer until use. Results: The SPPs and RMC with them were significant difference from different cultivars with color value, rheology and texture properties, and preference test. The SPP showed the highest lightness value in Sinchunmi (55.89) and the highest viscosity in Geonhwangmi (55.33 poise). The RMCs with SPPs had lower values in hardness and chewiness than the RMC without SPP. Overall quality of preference test showed the highest values in RMC with Sinyulmi and Sincheonmi. Conclusion: The best quality of sweet potato shaped rice madeira cake was made using Sinyulmi and Sinchunmi pastes. It is suggested that sweet potato paste is possible to use as the biomaterials for application of processed foods.
위암의 치료에 있어서 근치적 절제는 완치를 위한 유일한 방법이나 불행이도 많은 환자들이 국소적이나 혹은 타 장기로 전이된 상태로 발견된다. 이런 경우에는 근치적 절제술의 시행이 매우 어렵고 선행 화학요법을 시행하여 병기를 낮추려는 시도가 고려되어야 한다. Docetaxel은 반합성 택산으로 튜불린의 중합 반응을 유도하고 미세관의 해중합 반을을 방해함으로서 그 작용을 나타낸다. 현재 전이성 위암의 신행화학요법에서 docetaxel의 사용이 많이 시도되고 있고 그 반응률이 보고되고 있다. 본 교실에서는 docetsxel과 cisplatin 병용요법을 시행하여 전이성 위암의 부분 관해로 근치적 절제가 가응하였던 2예를 보고하는 바이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.