• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2023

This study analyzed the current and temperature characteristics of major components of an induction motor during normal and abnormal operations as functions of the difference in the rated capacities of medium and large-sized motors widely used in industrial settings. The temperature rise equation of the induction motor winding was derived through locked-rotor operation experiments and linear regression analysis. When the ambient temperature is 40 ℃, the time to reach 155 ℃, the temperature limit of the insulation class (F class) of the winding of the induction motor, was confirmed to be 48 seconds for the 2.2 kW induction motor and 39 seconds for the 3.7 kW induction motor. This means that when the rated capacity is large or the installation environment is high temperature, the time to reach the temperature limit of the insulation class during locked-rotor operation is short, and the risk of insulation deterioration and fire is high. In addition, even if the EOCR (Electronic Over Current Relay) is installed, if the setting time is excessively set, the EOCR does not operate even if the normal and locked-rotor operation of the induction motor is repeated, and the temperature limit of the insulation grade of the winding of the induction motor is exceeded. The results of this study can be used for preventive measures such as the promotion of electrical and mechanical measures for the failure of induction motors and fire prevention in industrial sites, or the installation of fire alarm systems.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.25-33
• /
• 2023

In this study, we determined the failure rate and fire status of electric motors widely used in domestic and industrial devices and analyzed the associated fire risks by identifying the electrical and temperature characteristics of electric motors under the normal and restrained operation modes in industrial sites and laboratories. A 2.2kW motor used for driving a conveyor during the vulcanization process in a rubber product manufacturing plant was employed as the study object and was exposed to a high- temperature environment as this motor is widely used in industrial sites. The current amplitude was 4.45-4.50 A during normal operation and 38.2-41.5 A during restrained operation due to the pinching of products and semi-finished products (i.e., 8.5 times higher than that during normal operation). The leakage current amplitude was 0.33 mA during both operation modes. The temperature of the workplace in summer was 42.38℃, indicating a poor environment for the installed motor. In the laboratory, the current and temperature of the coil inside a 3.7kW motor were measured under the restrained operation mode as performing measurements of the coil inside the motor in industrial sites is challenging. The current amplitude during normal operation was 3.5 A, whereas that during restrained operation for 30 s was 51.7-58.6 A, which is 14.8-16.7 times higher than that of normal operation. Moreover, the temperature of the motor coil increased from 22.9℃ to 101℃. Based on the experimental data, we derived the temperature increase formula according to the restrained operation time by performing a regression analysis and verified the time at which the temperature exceeded the stipulated limit for the insulation grade. The findings presented in this paper can be utilized to establish fire-prevention measures and perform safety management of motors of the same type or with a similar capacity.

• Journal of The Korean Association For Science Education
• /
• v.28 no.2
• /
• pp.169-179
• /
• 2008

In this study, 46 teaching materials for understanding the nature of science (NOS) were developed based on the 42 statements describing the NOS. Each teaching material involves scientific knowledge and scientific inquiry skills as well as NOS statements. Teaching materials consist of students' learning worksheets and teachers' guides. Among the materials, 11 materials for understanding the nature of scientific thinking (NOST) were applied to 3 scientifically gifted students. As results, the degree of difficulty was appropriate and students showed interests in scientific thinking rather than new concepts or inquiry activities involved in the materials. It was expected that understating the NOST would be helpful for conducting scientific inquiry in more authentic way. And similarly to the Park's (2007) theoretical discussions about the relationship between the NOS and scientific creativity, students actually responded that undertrading the NOST could help their creativity. Therefore, it was expected that teaching the NOST would be plausible elements for teaching scientific creativity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.381-388
• /
• 2017

This study was performed to evaluate the effects of Liriopis tuber (SLT) extracts on cookie production conditions for reduction of sugar usage through response surface methodology (RSM). The experimental conditions were designed according to the central composite design with 17 experimental points, including three replicates for three independent variables such as the amounts of SLT extracts, butter, and sugar. The experimental data on quality and sensory evaluation of cookies were fitted with various models, and accuracy of the equations was analyzed by ANOVA. Among various responses, spread ratio, sugar content, lightness, redness, hardness, and sensory properties of color, texture, sweetness, appearance, and overall quality showed significant correlations with the contents of three independent variables. From these results, the optimum formulation of cookies for reduced usage of sugar was calculated as SLT extract 6.84 g, butter 47.20 g, and sugar 36.02 g. Optimized cookies showed improved sensory properties but no difference in sweetness compared to control cookies.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.3-12
• /
• 2009

Ozone tolerance of tree species was determined by standard index of physiological damages and biochemical defense responses under short-term ozone exposure. At the end of 150ppb $O_3$ fumigation, photosynthetic characteristics and antioxidative enzyme activities were analyzed in the leaves of five species(Koelreuteria paniculata, Firmiana simplex, Styrax japonica, Fraxinus rhynchophylla, Viburnum sargentii). Injury index was determined by the effect of ozone on photosynthetic parameters and malondialdehyde(MDA) content, and tolerance index was calculated using the rate of increase in superoxide dismutase(SOD), ascorbate-peroxidase(APX), glutathione reductase(GR) and catalase(CAT) activities. Apparent quantum yield(AQY), carboxylation efficiency(Ce) and photo-respiration rate(PR) decreased in the leaves of five species with increasing ozone exposure time. These parameters were considered as an appropriate indicator for stress evaluation. Antioxidative enzyme activities showed various results depending on the tree species, exposure time, and enzyme types. SOD activity of K. paniculata increased with ozone exposure time, and that of F. rhynchophylla increased only after 6 hours of ozone exposure. CAT activity of $O_3$-exposed F. simplex was lower than the control. Based on standard index, ozone tolerance ability of five species was determined as two tolerant species(F. rhynchophylla > K. paniculata) and three sensitive species(S. japonica > F. simplex > V. sargentii).

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.492-499
• /
• 2016

This study assessed the whitening and anti-aging effects of the Cistanche deserticola extract, to develop a cosmetic substance. The cell viability of the Cistanche deserticola extract was evaluated in B16F10 melanoma cells by the MTT (3-(4,5-dimethylthaiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay. The cell viability of the extract was determined to be 90% at 4mg/ml concentration. Furthermore, the tyrosinase, collagenase, and elastase mRNA expression level were measured by RT-PCR, using the Cistanche deserticola extract treated B16F10 melanoma cells. At 4 mg/ml concentration, mRNA expression level of tyrosinase, collagenase, and elastase was dramatically decreased to 80.9%, 37.6%, and 70.9%, respectively. The antioxidant activity of the Cistanche deserticola extract was determined by DPPH free radical scavenging. The DPPH free radical scavenging capacities ranged from 70.6% to 82.6%, when evaluated from 2 mg/ml to 10mg/ml concentrations. The effects of whitening and anti-aging of the Cistanche deserticola extracts were examined at 2, 4, 6, 8, and 10 mg/ml concentration. Tyrosinase activities were inhibited from 66.8% to 78.5%, elastase activities were inhibited from 67.6% to 79.3%, collagenase activities were inhibited from 72.3% to 83.6%, and hyaluronidase activities were inhibited from 65.8% to 69.2%, respectively. These data suggest that the Cistanche deserticola extract is effective in whitening and anti-aging; therefore, it is considered to be a functional cosmetic material in cosmetic products.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.233-240
• /
• 2000

In order to fabricate dense cordierite ceramics without sintering aid, thermal behavior of Mg-Al-Si compounds during sintering was investigated. The dispersibility of cordierite suspension in aqueous media was measured by ESA(electrokinetic sonic amplitude). To prevent aggregation and insufficient dispersion of the cordierite sol, the pH of the suspension was controlled to 1.03 and 8.30 by adding $2N\;HNO_3$ and $2N\;NH_4OH$, respectively. Magnesium-aluminum-silicate complex gel coexisted in the specimen which has been gelled at $150^{\circ}C$ fir 12 hours, however several metastable phase such as ${\mu}-cordierite(Mg_2Al_4Si_5O_{18}),\;spine(MgAl_2O_4)\;and\;mullite(Al_6Si_2O_{13})$ existed below $1300^{\circ}C$ Nucleation rates of the two suspension were similar, but densification of the gel was sensitive to the pH of the sol. Densification of the sol with the pH of 8.3 was more pronounced than that of the sol with pH of 1.63.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.136-142
• /
• 2013

Optimal condition for pollen germination was suggested as a basic research of flowering physiology in order to identify the characteristics of flowering and seed setting of rare and endangered Forsythia saxatilis Nakai. Pollen samples were collected during flowering time from the end of March to the beginning of April. First, a suitable germination temperature, medium sucrose concentration and germination time were determined for pollen germination and pollen tube elongation in vitro, and then an optimal pH of culture medium. Pollen germination and tube elongation were significantly different among the levels of germination temperature, sucrose concentration and germination time. Interactive effects were observed between germination temperature and time, germination temperature and sucrose concentration, germination time and sucrose concentration. Pollen germination was the highest at $10^{\circ}C$ and increased with the increase of sucrose concentration, whereas it had no relation with germination time. In addition, pollen germination and tube elongation did not increase at more than 15% of sucrose concentration and 24 hours later. Pollen germination was the highest at pH 5 (20.8%) and the lowest at pH 6 (3.8%). In conclusion, $10^{\circ}C$, 15% sucrose and pH 5 were proposed as the optimal condition for pollen germination 24 hours later of pollen culture.

• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.503-518
• /
• 2012

In this paper, we propose a complexity-based parallelization method of the sample adaptive offset (SAO) algorithm which is one of HEVC in-loop filters. The SAO algorithm can be regarded as region-based process and the regions are obtained and represented with a quad-tree scheme. A offset to minimize a reconstruction error is sent for each partitioned region. The SAO of the HEVC can be parallelized in data-level. However, because the sizes and complexities of the SAO regions are not regular, workload imbalance occurs with multi-core platform. In this paper, we propose a LCU-based SAO algorithm and a complexity prediction algorithm for each LCU. With the proposed complexity-based LCU processing, we found that the proposed algorithm is faster than the sequential implementation by a factor of 2.38 times. In addition, the proposed algorithm is faster than regular parallel implementation SAO by 21%.