• 제목/요약/키워드: 김대식

검색결과 834건 처리시간 0.026초

부산시 어촌·어항개발에 대한 의식 분석 (The Analysis of Understanding of the Uevelopment of Fishing Villages and Fishing Ports in Busan)

  • 김대식;이춘우
    • 수산해양교육연구
    • /
    • 제17권2호
    • /
    • pp.218-227
    • /
    • 2005
  • Ocean resources have a very important role to meet the requirements of the people's leisure activities in a limited country, so fishing villages and fishing ports are getting more and more important as a source of supply to satisfy the demands as time goes on. There are various and far-reaching approaches to the fishing villages and fishing ports. However, studies to present the over-all direction of development policy for fishing villages and fishing ports have been short; especially the studies which have been dealing with Busan were verified to be very short relatively. As a result of survey, both officials in charge and residents in fishing villages have an enough understanding of what problems the development of fishing villages have and it's direction of development and spreading effects. In the part of the policy of developing fishing ports, officials answered that insufficient synthetic estimation was main problem in developing the fishing ports, while residents had a high recognition that local fishing ports and small scale fishing ports have had poor progress relatively. In the analysis of difference between two group about the spreading effects of developing fishing villages and fishing ports, they had affirmative opinions rather than negative ones without exemption. As mentioned above, it is a right direction to develop the existing fishing ports as well as new fishing ones to the multi-functional synthetic fishing ports. The specialized development should be made so that the special quality of coastal resources, which fishing villages have, will be made the best use of.

VSN (Virtual Switch Network) 기반의 이동 ATM 교환기 구조 및 타당성 평가 (Architecture and Feasibility Evaluation of VSN (Virtual Switch Network) based Mobile ATM Switching System)

  • 김대식;한치문;류근호
    • 전자공학회논문지S
    • /
    • 제36S권10호
    • /
    • pp.40-50
    • /
    • 1999
  • 서비스의 다양화, 고기능화, 고객의 요구에 부응하는 통신 네트워크에 대한 새로운 요구가 일어나고 있다. 따라서 ATM 전달망의 특징을 이용한 개방형 네트워크 구조에 대한 연구가 활발히 이루어지고 있다. 본 논문에서는 ATM 네트워크의 전달망을 스위치 네트워크로 이용하는 VSN(Virtual Switch Network) 개념을 IMT-2000 스위칭 시스템에 적용하고, 호 처리과정을 이용하여 VSN의 특성을 평가한다. 이 결과를 기본으로 VSN 기반 제어계 집약형 ATM-MSC 노드 구조를 제시하고, 호 처리 절차를 이용하여 VSN의 특성을 평가한다. 그 결과, 3.5msec 정도의 호 처리 지연을 허용하면, CCCP(Call and Connection Control Processor)를 중심으로 반경 100km내에서 VSN을 이용한 ATM-MSC 시스템 구성이 가능함을 나타낸다. 그리고 VSN 개념을 적용한 ATM-MSC 시스템 구성의 가능성과 VSN의 타당성을 분명히 한다.

  • PDF

전기저항 측정법을 이용한 탄소나노튜브/폴리프로필렌 나노복합재료의 내부 손상 예측 (Electrical Resistance Measurement in Characterizing the Internal Damage of Carbon Nanotube/Polypropylene Nanocomposites)

  • 김학수;권동준;왕작가;구가영;김대식;이춘수;박종만
    • Composites Research
    • /
    • 제26권3호
    • /
    • pp.201-206
    • /
    • 2013
  • 전기저항 측정법을 이용하여 전도성을 띄는 소재는 손상예측이 가능하다. 본 연구에서는 차량용 소재로 이용하는 폴리프로필렌(PP)를 이용할 때 재료 내부에 발생될 손상 평가법을 고안하였다. PP 내부에 전도성을 부여하기 위해 탄소나노튜브(CNT)를 0.5 wt% 삽입하여 CNT/PP 복합재료를 제조하였다. 손상 평가를 하기 위해 시편 내부에 구리선을 삽입하여 가로와 세로, 대각선 구간을 설정하여 측정하였다. 시편의 모형은 $20^{\circ}$ 휘어진 시편을 사용하였다. 동적 압축 실험에 따른 전기저항 측정을 통해 구간별로 전기저항 변화도를 분석하였다. 동적 압축 실험에 따른 구간별 전기저항 변화도의 신호는 재료 내부에 전가된 응력을 나타내는 신호이다. 전기저항 측정 구간에서 전기저항 변화도가 높은 경우는 미세 손상이 발생되었음을 의미한다. 전기저항 측정법을 이용한 동적 압축 실험에 따른 예상 손상부위와 실제 파괴 실험을 통해 본 평가 방법을 이용하여 재료 내부 미세 손상을 예측할 수 있는 방법임을 확인하였다.

Propylthiouracil 복용 후 발생한 사구체신염이 동반된 미만성 폐출혈 1예 (A Case of Diffuse Alveolar Hemorrhage with Glomerulonephritis after Propylthiouracil Treatment)

  • 이지현;김민수;이재곤;김대식;양혜진;강경우
    • Tuberculosis and Respiratory Diseases
    • /
    • 제72권1호
    • /
    • pp.93-97
    • /
    • 2012
  • Propylthiouracil (PTU) is one of the most common drugs used in the treatment of Graves' disease. There are a number of side effects found with PTU use including fever, rash, arthralgia, and flu-like symptoms. Recently antineutrophil cytoplasmic antibodies (ANCA) positive vasculitis after PTU treatment was reported as a rare side effect, which can cause diffuse alveolar hemorrhage and glomerulonephritis. A 45-year-old woman with Graves' disease had been treated with PTU for five months, complained of hemoptysis due to pulmonary alveolar hemorrhage causing anemia, and also had hematuria. Simple chest X-ray and HRCT showed bilateral consolidation and bronchoalveolar lavage fluid revealed alveolar hemorrhage. A serologic test was positive for ANCA against myeloperoxidase and proteinase-3. Such findings suggested that the presence of PTU induced ANCA positive vasculitis. Cessation of PTU and the administration of high dose steroids improved the clinical manifestation, radiologic and serologic findings. We observed ANCA titer serially for 6 years. During the follow up period, ANCA titer decreased slowly and stayed within the acceptable upper normal limit.

사물인터넷 기반 실내 환경 관제시스템 설계 및 구현 (Indoor Environment Monitoring and Controlling System design and implementation based on Internet of Things)

  • 박재운;김대식;주낙근
    • 한국정보통신학회논문지
    • /
    • 제20권2호
    • /
    • pp.367-374
    • /
    • 2016
  • 오늘날 많은 사람들은 공동의 실내 공간에서 학업이나 업무 등의 다양한 일을 수행한다. 그러나 이렇게 함께 공동으로 사용하는 공간은 여러 가지 오염 요인에 의해 업무의 효율 뿐 만아니라 건강에도 좋지 않은 영향을 미치게 될 수 있다. 그래서 무엇보다도 공동으로 사용하는 공간에 대한 쾌적한 환경의 유지가 중요한 요소로 인식되고 있다. 본 논문에서는 이러한 공동으로 사용되는 사무실이나 도서관, 강의실 등의 공간을 보다 쾌적한 환경으로 만들기 위해서 환경적으로 유해한 요소들을 분석하고, 이러한 유해 요소들을 관리하여 보다 좋은 생활환경을 제공하기 위한 통합 실내 환경 관제시스템을 설계 구현한다. 제안된 실내 환경 관제시스템은 실내 환경의 상태를 실시간으로 모니터링 할 수 있고 액추에이터를 구동시킴으로써 쾌적한 환경을 제공할 것이다. 또한, 각종 실내 공간에 적용할 수 있을 뿐만아니라 사람들의 실내 환경오염 인지도 역시 높이는 방안이 될 것이다.

Micromechanical 시험법과 AE를 이용한 세라믹 PZT 및 고분자 PVDF 센서에 따른 단섬유 강화 에폭시 복합재료의 비파괴 손상감지능 비교 (Comparison of Nondestructive Damage Sensitivity of Single Fiber/Epoxy Composites Using Ceramic PZT and Polymeric PVDF Sensors By Micromechanical Technique and Acoustic Emission)

  • 정진규;김대식;박종만;윤동진
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2004년도 춘계학술발표대회 논문집
    • /
    • pp.135-138
    • /
    • 2004
  • Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

  • PDF

선박엔진의 NOx 배출량 산정 (Estimation of Exhaust NOx Emission for Marine Engines)

  • 김대식;엄명도
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제24권4호
    • /
    • pp.441-445
    • /
    • 2000
  • Considering international status of our country as world class ship builder and geographical characteristics encircled by sea in three facets, controlling of air pollutants emission from marine engines becomes more and more important issue in recent days. Implementation of immediate pollutants emission control regulation and standardization of test and certification procedure are required to reduce air pollution from marine engines. But cost increments due to additional equipment of emission control device and development and certification test expenses as well as depreciation of fuel economy should be considered. To satisfy those air pollution reduction and economic requirements, we should make our own interpretation of IMO standard and implementation schedule depending on our country's status. For this purpose we measured NOx emission from small and middle class marine engines to calculate emission factor and total pollutant emission in our country. With the comparison and analysis of other countries emission control regulation we proposed basic data of total emission from marine engine and future emission control standard in our country. According to our estimation, 62% of total NOx emission of marine engines comes from fishing boat and 38% from commercial vessels. The portion of NOx emission from marine engine is 18.6% of whole country NOx emission. Due to the voyage characteristics of middle and large vessel and necessity of international harmonization of marine engine pollutants emission control standard, it is inevitable to adopt IMO standard for middle and large marine engines. But considering technological and cost effect of fishing boat operating in near sea, it is resonable to set a standard within 80% of measured value at the moment and gradually implement the same IMO standard in near future.

  • PDF

국내 은행의 정보생산 역할에 관한 실증 연구 (An Empirical Study on the Role of Korean Banks' Information Production)

  • 김대식;이재현;이준행
    • 재무관리연구
    • /
    • 제27권1호
    • /
    • pp.157-180
    • /
    • 2010
  • 본 연구는 상대적으로 정보비대칭성이 강하다고 판단되는 코스닥시장 기업을 대상으로 은행의 정보생산 역할에 대한 실증분석을 시행하였다. 2004년 10월부터 2006년 3월까지 발생한 164개의 장기차입공시자료를 이용하여 공시일 기준 사건연구를 시행하였다. 그 결과 은행차입공시로는 주식비정상수익률이 발생하지 않았으며, 사채의 경우에는 유의적인 음의 비정상수익률이 발생하였다. 또한 자본구조가 가격에 반영될 가능성을 고려하여 목표부채비율과 공시일 직전 부채비율의 차이를 통제한 분석에서는 모든 차입형태에 대해 유의적인 영향이 없는 것으로 나타났다. 이는 표본기업들의 은행대출획득 사실은 긍정적인 정보전달효과가 없다는 것을 의미하며, 따라서 은행대출은 차입기업에 대한 우월한 정보를 생산하는 특별한 상품이기 보다는 여러 가지 자본조달 수단들 중의 하나에 지나지 않는 것으로 해석된다.

  • PDF

크기가 다른 Shot에 의하여 Peening한 ZrO2 복합 세라믹스의 비커스 압입하중에 따른 와이블 통계 해석 (Weibull Statistical Analysis According to Vickers Indentation Load of Peened ZrO2 Composites Ceramics by Different Shot Size)

  • 안석환;김대식;남기우
    • 대한기계학회논문집A
    • /
    • 제40권12호
    • /
    • pp.987-995
    • /
    • 2016
  • 본 연구는 $ZrO_2$의 비커스 경도에 대한 쇼트 피닝 효과를 연구하였다. 쇼트의 크기는 ${\phi}180{\mu}m$${\phi}300{\mu}m$를 사용하여 피닝하였다. 비커스경도는 압입하중 98 N과 294 N으로 측정하였다. 비커스 경도는 와이블 통계 해석을 수행하여, 볼 크기 및 압압 하중에 따르는 영향을 평가하였다. 척도 파라메터는 98 N 압입 하중 및 ${\phi}180{\mu}m$ 쇼트 볼에서 크게 나타났다. 형상 파라메터도 대체적으로 작은 쇼트 볼(180sp)이 크게 나타났다. 이것으로부터 SP처리에 의한 압축 잔류 응력은 $ZrO_2$의 기계적 성질의 향상에 좋은 방법이다.

PI와 유기 절연막 과의 전기광학 특성 비교에 관한 연구 (Study on Electro-Optical Specific of Polyimide and Organic Overcoat)

  • 김병용;김종환;한정민;김영환;강동훈;김종연;옥철호;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.376-376
    • /
    • 2007
  • In Liquid Crystal Display (LCD) manufacturing, the organic over coat materials over coat materials for insulation layer of color filter with acryl ate was widely used. Therefore, we approach that the organic overcoat material can use to insulation layer for color filter and liquid crystal (LC) alignment layer in this research. The LC aligning capabilities was successful stuided for the first time. The organic overcoat layer and polymer layer was coated by spin-coating. In order to characterize the LC alignment, electric optic and residual DC and atomic force microscopy (AFM) image was used. The good LCD aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. Also the good LCD alignment capabilities treated polymer on surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1800 eV can be achieved. Comparing electro-optical characteristics between the Polyimide (PI) and the overcoat, the resultant transmittance of the overcoat considerably matched that of the PI and the residual DC also exhibited similar features with the PI.

  • PDF