• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.98.2-98.2
• /
• 2015

한국항공우주연구원에서는 Military Standard 801G:2014 문서의 500.6 방법에 따른 고도시험 서비스를 제공하고 있으며, 이를 위해 직경 1.6 미터, 길이 1.8 미터의 진공챔버를 활용하고 있다. 규격에서 요구하는 고도변화율(10 m/s 이하)를 만족시키기 위해서, 건식펌프를 이용하여 챔버 내부 진공도를 낮추고, 동시에 매뉴얼밸브의 개도를 적절히 조절하여 왔다. 따라서, 작업자의 능력과 숙련도에 따라 실제 고도변화율이 달라지게 되고, 이는 곧 시험의 재현성을 방해하는 요소로 작용하였다. 이러한 단점을 보완 하고자 기존의 데이터를 바탕으로 하여 원격 유량조절밸브 적용 후 질소의 챔버내부 유입을 통한 고도시험의 자동화를 구현하였다. 고도시험의 자동화를 통해, 일정한 고도변화율을 유지할 수 있으며, 정확한 시험결과를 도출 할 수 있었다. 본 논문에서는 고도시험 자동화 구현 방법과 일련의 진행 과정에 대해 기술하였다.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.327-333
• /
• 2020

Performance of a portable GC that can be utilized for the real time determination of volatile organic compounds in air was evaluated. It employs purified/compressed ambient air as the carrier gas eliminating the need for high pressure gas tanks. The compact system with dimensions of 35 × 26 × 15 ㎤ and weight of 5 kg is powered by either a 24 V DC external adapter or battery pack. Chromatograms of the mixture sample including benzene, toluene, ethylbenzene, and oxylene at concentrations of 1 ppmv and 20 ppmv represent a good reproducibility: 3.79% and 0.48% relative standard deviations (RSDs) for peak area variations; 0.40% and 0.08% RSDs for retention times. The method detection limit was 0.09 ppmv. A 30 m long, 0.28 mm I.D. column operated at an optimal condition yielded a peak capacity of 61 with good resolution for a 10 min isothermal analysis. The relative standard deviations (RSD) of the peak area variations and retention times during consecutive measurements over 27 h were less than 2.4%RSD and 0.5%RSD, respectively. Thus, this instrument makes it suitable for continuous and field analysis of low-concentration VOC mixtures in the indoor/outdoor environment as well as the spillage accident of hazardous chemicals.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.161-169
• /
• 2008

Since measuring the size of kidney with sonography becomes an important index for diagnosis, treatment, and prognostic prediction in kidney disease, the accurate measurement and evaluation on this are clinically very important. Accordingly, the purpose of this study was to increase reproducibility and objectivity in measuring the size of kidney by enumerating factors that have an impact for measurement. It targeted 44 adults in Korea at the age of 21-27. It measured in order for both kidneys to be seen most largely while changing a subject-examiner's position in a state of fasting for 8 hours and a transducer's approaching direction. It compared a size of kidney by measuring, respectively, with the same method in 30 minutes and in 1 hour after drinking water in 700-1,000cc. In case of the lateral approach scan in decubitus position, the average length of the kidney both to the right and the left and the deviation of measurement to be the largest. In NPO(None Per Oral) state, the average length in the right kidney was 10.19cm, and the average length in the left kidney was 10.33cm. In 60 minutes after taking moisture, the average length in the right kidney was 10.94cm, and the average length in the left kidney was 11.13cm. In comparing the average length of the kidney in NPO state and its average length in 60 minutes after taking moisture, the size swelled by 7.3% for the length in the right kidney and by 7.7% in the left, thereby having been indicated to be statistically significant(P<0.003). The measurement in a size of kidney by using ultrasound may be measured differently depending on a patient's state of taking moisture and a transducer's approaching direction. It is thought that when the measurement in a size of kidney is especially important clinically, the intake and intake time in moisture need to be considered and that measuring with the posterior approach in prone position is a good method aiming to increase reproducibility in measuring length of the kidney.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.471-475
• /
• 2001

Solid phase microextraction(SPME) with $85{\mu}m$-polyacrylate (PA) and $100{\mu}m$-polydimethylsiloxane(PDMS) fibers, coupled to gas chromatography-mass spectrometry was used to determine 1,2-dibromo-3-chloropropane(DBCP) and n-butylbenzene in water. The conditions affecting the SPME process(i.e, extraction time, injection length, injection temperature, desorption time and temperature) were optimized. The linearity of the calibration curve (correlation coefficient, R) was over 0.99 and the limits of detection of the method were between 1.5 and $10.8{\mu}g/L$. Repeatability of the method was between 10.4 and 14.4 %.

• Water for future
• /
• v.19 no.2
• /
• pp.139-148
• /
• 1986

The hydrologic response function in a small basin is expressed by the distribution function of slope length. The characteristics of topographical factors is represented to the concentration time, and the instantaneous unit hydrograph is derived as a hydrologic rsponse function by application of probobility density function. The averaging process of runoff characteristics within watershed was analyzed for a few small watershed where was split up the small basin itself. The method of calculation of the effective rainfall should play important roles in the transformation process from hydrologic response function to runoff hydrograph. In this paper, the Horton's infiltration quation is used as a method of calculation of effective rainfall, a new response function of runoff process is derived. The $\Phi$-index method and the infiltration method are tested by comparing the observed and estimated values.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.63-63
• /
• 2018

최근 이상기후로 인한 국지성 호우의 발생빈도 및 강우강도의 증가는 하천횡단구조물의 안정성에 문제가 되고 있다. 하천 횡단구조물(보, 물받이공 등)의 파괴는 국부 세굴(bed scour), 파이핑(piping), 구조물 본체의 불안정성 등의 원인으로 발생되고 있으며, 이 중에서 구조물 본체의 불안정성은 도수(hydraulic jump)로 인한 압력변이도 주요 원인이 될 수 있다 (Bower and Toso, 1988; Kazemi, F. et al., 2016). 그러나, 현재 직접적인 파괴 원인인 세굴 등에 대한 연구에 비해 압력변이로 인한 구조물의 파괴원인을 분석하는 연구는 미비한 실정이다. 본 연구에서는 다양한 흐름조건을 발생시켜, 하천횡단구조물 주변의 도수특성 및 도수로 인한 압력변이에 대하여 수리실험 및 수치모의를 통하여 검토하고자 한다. 수리실험에 사용하는 수로는 길이 10 m, 폭 0.3 m, 높이 0.4 m이며 상류로부터 2.5 m 떨어진 곳에 보(weir)를 설치하였다. 실험조건은 다양한 흐름조건에 따른 도수 발생을 검토하고자 상하류 수위를 조절을 통해 Froude 수의 범위를 1 < Fr < 10로 설정하였다. 압력변이는 전압형 압력계(Model : UNIK 5000, 압력 측정 변위 : -2 ~ 5 kPa)를 사용하였으며, 보(weir) 하류단에서 2.5 cm 간격으로 천공하여 측정하였다. 또한 3차원 모형인 FLOW-3D 모형을 이용하여 실험수로를 재현하였으며, 도수 발생 위치, 도수 길이, 도수 발생 시 압력변이에 대하여 실험결과와 수치모의 결과를 비교하여 수치모형을 검증하였다. 최종적으로 Froude 수에 따른 도수특성(도수 발생위치, 도수 길이 등) 및 최대 압력변이를 무차원화 하여 나타내었다. 본 연구는 도수 발생 시 압력변이로 인한 구조물 파괴분석에 대한 기초가 되는 기본적인 연구이나, 향후에는 물받이공 길이, 두께 등 하천횡단 구조물 설계인자 도출에 선행연구로 발전할 수 있다고 판단된다.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.179-191
• /
• 1999

To device effective freeway traffic flow control strategies and freeway traffic information dissemination strategies, it is very important to estimate real physical queue length on the freeway. Shock wave theory and queueing theory have limitation to be used to estimate the queue length. The primary objective of this study is to develop a reliable method for estimating the physical queue length and level of congestion. Queueing propagation processes were analysed by using such traffic data as main line traffic volume, ramp volume, density. speed, and physical queue length collected by video photographing on Olympic Freeway. As a result of analysis, it has been confirmed that the real queue length can be estimated by using the traffic counts arriving the congested region and passing a bottleneck location. Further more, a reliable method for estimating the level of congestion could be developed on the basis of real-time traffic counts.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.297-303
• /
• 2014

Purpose : The purpose of this study is reproducibility evaluation of deep inspiration breath-hold(DIBH) technique by respiration data and heart position analysis in radiation therapy for Left Breast cancer patients. Materials and Methods : Free breathing(FB) Computed Tomography(CT) images and DIBH CT images of three left breast cancer patients were used to evaluate the heart volume and dose during treatment planing system( Eclipse version 10.0, Varian, USA ). The signal of RPM (Real-time Position Management) Respiratory Gating System (version 1.7.5, Varian, USA) was used to evaluate respiration stability of DIBH during breast radiation therapy. The images for measurement of heart position were acquired by the Electronic portal imaging device(EPID) cine acquisition mode. The distance of heart at the three measuring points(A, B, C) on each image was measured by Offline Review (ARIA 10, Varian, USA). Results : Significant differences were found between the FB and DIBH plans for mean heart dose (6.82 vs. 1.91 Gy), heart $V_{30}$ (68.57 vs. $8.26cm^3$), $V_{20}$ (76.43 vs. $11.34cm^3$). The standard deviation of DIBH signal of each patient was ${\pm}0.07cm$, ${\pm}0.04cm$, ${\pm}0.13cm$, respectively. The Maximum and Minimum heart distance on EPID images were measured as 0.32 cm and 0.00 cm. Conclusion : Consequently, using the DIBH technique with radiation therapy for left breast cancer patients is very useful to establish the treatment plan and to reduce the heart dose. In addition, it is beneficial to using the Cine acquisition mode of EPID for the reproducibility evaluation of DIBH.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.44-44
• /
• 2015

저수지나 하천 사면에서 발생하는 산사태와 토석류는 저수지와 하천 수체에 충격을 가한다. 이로 인해 발생하는 수면 충격파는 전파되어 반대편 제방으로 파의 처오름 또는 댐 제체위로의 물넘이로 큰 피해를 줄 수 있다. 최근 외국에서는 2차원 충격파 생성 및 전파의 기본 과정을 구명하기 위한 실험적 연구가 이뤄지고 있으며, 이들 연구들은 충격파의 발생과 전파, 사면활동 물질과 수체의 상호작용 그리고 자유 수면과 유속분표의 발달에 대한 자세한 관측 자료를 제시하고 있다. 아울러 충격파에 영향을 주는 지배 매개변수를 제시하고 있다. 하지만, 이러한 실험적 연구의 최근 진보에도 불구하고, 이들 지배 매개변수를 고려한 충격파 지배공식들은 대상 지역의 복잡한 바닥 지형이나, 평면적 지형 변화를 단순한 추정치로만 고려하게 된다. 따라서 복잡한 지형조건에서 토석류와 수체의 상호작용과 수면 충격파의 전파를 합리적으로 해석하는 데는 한계가 있다. 이 경우 수치모델링 기법을 대안으로 적용할 수 있으나, 수치모델링은 수면에서 충격파의 전파와 수중에서 토석류의 전파를 동시에 모의해야 하고, 뉴턴 유체와 비뉴턴 유체의 특성을 동시에 고려해야하므로 수치해석 연구자들에게는 하나의 큰 도전사항이다. 이 연구는 경계면 포착기법을 이용한 계산유체동력학 기법을 이용하여 사면활동과 이로 인한 정지 수역에서의 충격파의 발생 및 전파를 재현하기 위한 수치 모델링 기법을 개발하는 것이 목적이다. 사면활동과 수면의 경계면을 포착하고 위치를 정립하기 위해서 VOF (volume of fluid) 경계면 재구축 기법을 이용한다. 지배 방정식은 비압축성(incompressible) 질량 보존방정식과 나비어-스톡스(Navier-Stokes) 방정식이며, 서로 다른 유체의 상(phase)애 대한 체적분할이송방정식을 이용한다. 큰와 모의 계열의 난류 모델링 기법을 적용하여 충격파의 전파와 붕괴에 대한 난류의 영향을 고려하였다. 토석류는 비뉴턴 흐름저항 관계식을 적용하여 그 흐름특성을 재현하였다. 이들 지배방정식은 2차 정확도의 유한체적법(finite volume method)을 이용하여 해석한다. 외국의 연구자들이 관측하여 제시한 길이 11 m 그리고 폭 0.5 m의 수로에서 발생한 충격파를 수치적으로 재현하여 개발된 모형의 실제 문제에 대한 적용성을 보여준다.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.675-681
• /
• 2019

The purpose of this study was to investigate the effect of increasing the amount of 3D volume imaging on the hand, knee, and foot human phantom in CT, After analyzing the data, three - dimensional volumetric images were implemented using MMWP program to evaluate reproducibility. First, the data amount of three human phantoms according to each increment was analyzed. Secondly, the reproducibility evaluation and the measured length were compared. As a result of analyzing the amount of image data for each phantom according to the increment, it was confirmed that the amount of data is reduced to about 1/10 when the increment is set to 1.0 mm as compared with the case where the increment is set to 0.1 mm. In the evaluation of the feasibility, gap was generated from 0.7mm for hand phantom, 0.6mm for knee phantom and foot phantom, and it was confirmed that even when the actual phantom and actual length were compared, the length was much different and the implementation was lowered. As the increment is closer to 1.0mm, the number of images is small and the 3D implementation time is small. Therefore, it is best to determine the increase before the gap of the image is generated and to apply the Increment for preoperative diagnosis. We hope that this study will be an indicator of the accurate increment setting when implementing 3D image through VRT Rendering after CT scan.