• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.149-152
• /
• 2010

본 논문은 지구공간에 존재하는 다양한 공간정보를 이용하여 도로 및 철도 계획과 공사를 위한 최적노선을 선정하는 기법에 관한 새로운 연구이다. 사람과 물자를 수송하는데 있어서 가장 기본적인 공공교통시설인 도로 및 철도를 건설하기 위하여 초기에 가장 중요한 결정이 바로 최적노선결정이므로 환경파괴를 최대한으로 감소시키고 그 기능을 충분히 발휘할 수 있도록 대상 지역의 여러 가지 조건을 고려하여 가장 적합한 노선의 위치를 결정하여야 한다. 3차원 지형 환경의 공간영상콘텐츠는 국토계획 및 통신설비계획, 철도건설, 시공, 입체적인 유비쿼터스 도시 구현, 안전 및 방재 등에서 많은 요구와 그 중요성이 크게 부각되고 있다. 현재 지리정보 기반의 2차원적인 지도정보와 시설정보를 다차원의 도시공간으로 재현하기 위하여 기존의 등고선을 이용한 DEM 방식은 많은 한계를 가지고 있으며, 특히, 철도와 같은 노선 폭이 좁고 길이가 길어서 궤적 관리가 어려운 작은 구조물의 경우에는 그 고도모델이 무시되기 쉬우므로, 레이저 측량 기술을 이용한 공간대상물에 대한 높은 정확도 취득이 크게 필요한 실정이다. 본 연구에서는 원격탐사 영상 Data를 중심으로 하는 정사보정하고 이에 매칭 할 수 있는 수치 지도 벡터와의 통합 및 전환으로 다차원 공간에서 건물 모델의 생성과 다양한 활용을 제시하는 것을 연구목적으로 하였고, 연구방법으로는 기존의 이미 취득한 2차원적인 평면사진을 지상 기준점에 의하여 정밀기하보정을 하여 얻은 사진영상자료를 이용하여 3차원 공간정보로 구성하기 위해서는 동일지역에 대한 수준 측량결과인 높이 데이터를 매칭하여야 하므로, 항공기에 탑재한 센서로 모든 대상지에 대한 지형지물의 고밀도의 높이 값을 획득하여 위치보정 작업 후에 3D로 매칭할 수는 방법을 연구하여 실험하도록 하였다 또한 본 연구에서는 연구대상지역의 지형조건, 기존 노선과의 비교, 토지이용, 지형경사, 사면방향, 지가 등을 분석하여 각각의 경중률을 고려한 후 선택된 후보노선들을 비교분석함으로서 최적노선을 선정하고자 하였다.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.447-452
• /
• 2013

Vessel traffic system uses multiple sea surveillance radars as a primary sensor to obtain maritime traffic information like as ship's position, speed, course. The systematic errors such as the range bias and the azimuth bias of the two-dimensional radar system can significantly degrade the accuracy of the radar image and target tracking information. Therefore, the systematic errors of the radar system should be corrected precisely in order to provide the accurate target information in the vessel traffic system. In this paper, it is proposed that the method compensates the range bias and the azimuth bias using AtoN information installed at VTS coverage. The radar measurement residual error model is derived from the standard error model of two-dimensional radar measurements and the position information of AtoN, and then the linear Kalman filter is designed for estimation of the systematic errors of the radar system. The proposed method is validated via Monte-Carlo runs. Also, the convergence characteristics of the designed filter and the accuracy of the systematic error estimates according to the number of AtoN information are analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.37-37
• /
• 2015

본 연구는 남강댐 유역($2,293km^2$)을 대상으로 이중편파 레이더 강우자료와 격자기반 분포형 강우-유출 모형인 KIMSTORM(KIneMatic wave STOrm Runoff Model)을 이용하여 홍수추적을 수행하고, 침수실적자료와 비교하여 레이더 강우자료의 효용성을 검토하였다. 2012년 4개의 강우 이벤트(집중호우, 카눈, 볼라벤, 산바)에 대하여 한강홍수통제소로부터 보정된 비슬산 레이더 강우자료를 제공받아 사용하였다. 레이더 강우와 지점 강우를 비교하기 위해 면적평균강우량을 산정하여 분석한 결과, 유출량산정 지점별 면적평균 강우량은 대체적으로 레이더가 지점 강우보다 더 낮은 값으로 예측되었지만, 강우의 패턴은 상당히 일치하는 것으로 나타났으며, 평균 $R^2$는 0.97로 매우 우수하게 분석되었다. 이후 분포형 홍수추적을 위해 KIMSTORM을 이용하였으며, 격자크기 $500{\times}500m$ 해상도의 156행${\times}$137열의 총 21,372개의 셀로 모형을 구축하였다. 분포형 모형의 보정을 위해 지상강우를 적용하여 모형을 보정하고, 보정된 매개변수를 레이더강우에 그대로 적용하여 적용성을 평가하였다. 모형의 보정 결과, $R^2$(coefficient of determination), ME(model efficiency), VCI (volume conservation index)의 평균이 지점강우를 이용한 경우 각각 0.85, 0.78, 1.09%, 레이더 강우를 이용한 경우 각각 0.85, 0.78, 0.96으로 모의유량이 관측유량을 잘 재현하였다. 이후 태풍 산바에 의한 하천범람 침수실적자료의 침수지역(신연, 문대, 신기지구)과 레이더에 의한 침수지역 유출분석 결과를 비교하였다. 침수지역 호우 및 유출의 공간분포를 분석한 결과 레이더 강우가 침수지역 상류유역의 호우와 유출상황을 자세하게 재현하였으며, 침수지역의 침수기간 전 후를 분석한 결과 지점강우 보다 레이더 강우가 실제 첨두유량에 가깝게 우수하게 모의되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.2 s.54
• /
• pp.129-136
• /
• 2009

The paper presents an algorithm of selecting optimal locations for measuring displacements(OLD) to adjust cable tension forces during the construction of cable-stayed bridges. The rank for optimal locations can be determined from the effective independence distribution vectors(EIDV) that are computed from the Fisher Information Matrices(FIM) formulated with the displacement sensitivities. To examine the efficiency and reliability of the proposed algorithm for determining OLD, a simulation study on a cable-stayed bridge has been carried out. The results using FIM formulated with displacements are compared with those using FIM with displacement sensitivities through the simulation study. The effects of measurement noise and error in cable length on the adjustment of cable tension forces are evaluated statistically by applying the Monte Carlo scheme.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.18-24
• /
• 1994

We have investigated a method to measure the refractive index, coherence length, and the third order nonlinear optical susceptibility ($x^{(3)}$) of the conducting polymer film. ($x^{(3)}$) of polymer film was obtained, by comparing Maker fringe of polymer film with that of fused quartz, and by calculating the correction factor due to the linear refractive index. The linear refractive index of polymer film was determined from the envelopes of the maxima and minima in the transmission spectrum. Poly ((1,4-phenylenevinylene$)_{0.34}$-co-(2-methoxy-1,4-phen ylene vinylene$)_{0.66}$) [PP$V_{0.34}$-PMP$V_{0.66}$] thin film was prepared by spin coating method. From transmission spectrum and Maker fringe data, we found that the refractive index, coherence length, and the third order nonlinear optical susceptibility ($x^{(3)}$) of the [PP$V_{0.34}$-PMP$V_{0.66}$] are 1.786, 17.86 ${\mu}m$ and 5.8${\times}10^{-12}$esu, respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.3-12
• /
• 2001

This paper presents the proposed methods of DE (distinct element) modelling to estimate the stability of tunnels in jointed rock masses. First, the criterion to select the joint set(s) contributed to the discontinuous behaviour in a tunnel section is proposed. Selected joint set(s) is(are) considered to form the edges of distinct elements (rock blocks) and the others to modify the elastic properties of rock blocks. The complex DE model with the average and the deviation of joint orientation and joint length for each joint set was compared to the simple model with only the average of joint orientation and the assumption that joint length is infinite. As a result, the latter is suitable to the purpose of tunnel design because it can show the consistent behaviour of a jointed rock mass such as the locally discontinuous failure and the global anisotropic behaviour.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.371-377
• /
• 2013

This paper proposes three methods for improving the accuracy of auto-music transcription considering with time-varying tempo from monophonic sound. The first one that uses TV(Total Variation) filter for smoothing the pitch data reduces the fragmentation in the pitch segmentation result. Also, the measure finding method that combines three different ways based on pitch and energy of sound data, respectively as well as based on rules produces more stable result. In addition the temporal result of note-length encoding is corrected in optimal way that the resulted encoding minimizes the sum of quantization error in a measure while the sum of note-lengths is equal to the number of beats. In the experiment with 16 children songs, we obtained the improved result in which measure finding was complete, the accuracy of encoding for note-length and pitch was about 91.3 and 86.7, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.288-297
• /
• 2012

This study proposes a design model of the variable type resonator which corrects the temperature variance according to the season, in order to maximize the resonance effect in the Sacred bell of the Great King Seongdeok. In the bell, the 1st natural frequency (64 Hz) and the 2nd natural frequency (168 Hz) are the most important partial tones. Resonance conditions of the two components are determined for the internal acoustic cavity system, which consists of bell body cavity, gap and the resonator. Acoustic frequency response characteristics of the internal cavity are determined by the boundary element analysis using SYSNOISE. As an external factor, temperature variance according to the season largely influences the resonance condition and the length of the resonator should be controlled to maximize the resonance effect. As a measure, this study proposes a design model of the variable type resonator for the Sacred Bell of the Great King Seongdeok, which can control the length at the belfry according to the season.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.133-141
• /
• 2021

The probe vehicle penetration rate is a required parameter in the estimation of entire volume, density, and queue length from probe vehicle data. The previous studies have proposed estimation methods without point detectors, which are based on probability structures for the locations of probe and non-probe vehicles; however, such methods are poorly suited to the case of multi-lane streets. Therefore, this study aimed to estimate the probe vehicle penetration rate at a multi-lane intersection and introduce a probability distribution of the queue length of each lane. Although a gap between estimates and observations was found, the estimates followed the trend of observations; the estimation could be improved by the correction factor hereafter. This study is expected to be used as a basic study for the estimation of entire volume, density, and queue length at multi-lane intersections without point detectors.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.53-64
• /
• 2017

Purpose: To evaluate the usefulness of the $HexaPOD^{TM}$ evo RT system(6DoF couch) and the tendency of dose difference according to size of rotational direction error for volumetric rotational modulated radiotherapy(V-MAT) in patients with long target lengths. Therefore, it is suggested to recommend the need for rotational error correction. Materials and Methods: Ten patients with Esophagus cancer or Breast cancer including SCL treated with HexaPOD 6DoF(Six-Degree of Freedom) couch were included in this study. 6DoF couch was used to measure the difference in dose according to the rotation error in the directions of Rx(pitch), Ry(roll), and Rz(yaw). Each rotation error was applied. Positioning variation on x, y and z axis was verified and random variations were made by 6DoF couch with positioning variation. Modified DQA is conducted and point dose and gamma value are analyzed and compared. In addition, after applying the rotation error every $1^{\circ}$ to treatment plans of each target with a diameter of 3 cm, 5, 10, 15, and 20 cm respectively, gamma passing rate is being monitored by its aspect of change according to types and sizes of the target length and rotation error. Results: Mean error of the point dose and Gamma passing rate when the position variation was applied were $2.50{\pm}1.11%$ and $84.1{\pm}7.39%$ in the Rx direction, $2.36{\pm}1.16%$, and $81.0{\pm}8.49%$ in the Ry, $2.35{\pm}1.10%$ and $84.4{\pm}6.99%$ in the Rz direction, respectively. As a result of analysis on gamma passing rate according to types and sizes of the target length and rotation error, the gamma passing rate tended to decrease with increasing rotation error in the Rx and Rz directions except Ry direction. In particular, the lowest gamma passing rate (74.2 %) was in the case of $2.5^{\circ}$ rotation error in Rz direction of the target of 10 cm. Conclusion: The correction of the rotational error is needed for volumetric modulated radiotherapy of the treatment area with a long target length, and the use of 6DoF couch will improve the reproducibility of the patient position and the quality of the treatment.