• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.1017-1024
• /
• 2017

The objective of this study was to investigate the inhibitory effects of Litsea japonica fruit flesh extract (LJF-HE) on gastritis in an indomethacin-induced SD rat model. Rats were randomly divided into six groups: G1 (normal group), G2 (control group, indomethacin-induced gastritis), G3 (positive group, indomethacin-induced gastritis and ranitidine 50 mg/kg), G4 (LJF-HE-L group, indomethacin-induced gastritis and L. japonica fruit flesh extract at 30 mg/kg), G5 (LJF-HE-M group, indomethacin-induced gastritis and L. japonica fruit flesh extract at 60 mg/kg), G6 (LJF-HE-H group, indomethacin-induced gastritis and L. japonica fruit flesh extract at 120 mg/kg). In the group treated with LJF-HE (G4, G5, and G6), gastric mucosal damage, gastric juice secretion and pepsin activity were significantly decreased compared to the control group. Additionally, there were decreases in the expression of cholecystokinin 2 receptor (CCK-2r), histamine receptor H2 (H2r) and H+/K+ ATPase in the gastric lesions. The plasma levels of TNF-${\alpha}$ and IL-$1{\beta}$ significantly decreased in LJF-HE (G4, G5, and G6) treated groups compared with control. The plasma level of PGE2 was also significantly increased by LJF-HE (G5 and G6). These results suggest that LJF-HE (G4, G5, and G6) has the ability to inhibit on indomethacin-induced gastritis.

• Journal of the Korean association of regional geographers
• /
• v.11 no.6
• /
• pp.530-542
• /
• 2005

In this study, GIS method has been used to get fractal characteristics. Using the projected area and surface area, 2 dimensional fractal characteristic of terrain was found out. Correlation of fractal dimension and mean slope were also checked over. Results are as below. 1) To get a fractal dimension, the method which is using the surface area is also directly proportional to complexity of the terrain as other fractal dimension. 2) Fractal dimensions using the surface area, that is proposed in this thesis are carried out as below : Uiseong : $2.02{\sim}2.15$ Yeongcheon : $2.10{\sim}2.24$. These values are in a range of fractal $2.10{\sim}2.20$ dimensions which has known. 3) Correlation of mean slope and fractal dimension is diminished about 30% in a region which is more than $25^{\circ}$ of mean slope. So, in this region using the fractal dimension method is better than using the mean slope. From this study, on formula using the projected area and surface area is still good to get a fractal dimension that has been found. But to confirm this method the region of research should be wider and be set up the correlation of mean slope, surface area and fractal dimension. It can be applicable to restoration of terrain and traffic flow analysis in the future research.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.161-168
• /
• 2007

Web attack uses structural, logical and coding error or web application rather than vulnerability to Web server itself. According to the Open Web Application Security Project (OWASP) published about ten types of the web application vulnerability to show the causes of hacking, the risk of hacking and the severity of damage are well known. The detection ability and response is important to deal with web hacking. Filtering methods like pattern matching and code modification are used for defense but these methods can not detect new types of attacks. Also though the security unit product like IDS or web application firewall can be used, these require a lot of money and efforts to operate and maintain, and security unit product is likely to generate false positive detection. In this research profiling method that attracts the structure of web application and the attributes of input parameters such as types and length is used, and by installing structural database of web application in advance it is possible that the lack of the validation of user input value check and the verification and attack detection is solved through using profiling identifier of database against illegal request. Integral security management system has been used in most institutes. Therefore even if additional unit security product is not applied, attacks against the web application will be able to be detected by showing the model, which the security monitoring log gathering agent of the integral security management system and the function of the detection of web application attack are combined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2016

The effect of the migration of nanoparticles near the wall of a channel on the convective heat transfer in a laminar flow of $SiO_2$ nanoparticle suspensions (nanofluids) under constant wall heat flux boundary conditions was numerically and experimentally investigated in this study. The dynamic thermal conductivity of the aqueous $SiO_2$ nanofluids was measured using T-type thermocouples attached to the outer surface of a stainless steel circular tube (with a length of 1 m and diameter of 1.75 mm). The nanofluids used in this study were synthesized by dispersing $SiO_2$ spherical nanoparticles with a diameter of 24 nm in de-ionized water (DIW). The enhancement of the thermal conductivity of the nanofluids (e.g., an increase of up to 7.9 %) was demonstrated by comparing the temperature profiles in the flow of the nanofluids with that in the flow of the basefluids (i.e., DIW). However, this trend was not demonstrated in the computational analysis, because the numerical models were based on continuum assumptions and flow features involving nanoparticles in a stable colloidal solution. Thus, to explore the non-continuum effects, such as the modification of the morphology caused by nanoparticle-wall interactions on the heat exchanging surfaces (e.g., the isolated and dispersed precipitation of the nanoparticles), additional experiments were performed using DIW right after the measurements using the nanofluids.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.185-196
• /
• 2006

Fracture toughness is a material property for crack initiation and propagation in fracture mechanics. For mode I fracture toughness measurement in concrete, RILEM committees 89-FMT proposed three-point bend tests based on the two-parameter fracture model. But, there is no proposed test method as a standard for mixed mode test for now. And RILEM three-point bend test procedure is complicate. Therefore, in this study, brazilian disks of various size were designed as the concrete with a similar specified concrete strength and maximum size of coarse aggregate($G_{max}$) were respectively 20mm and 40mm. And mode I fracture toughness of brazilian disks was compared with that of RILEM three-point bend test. As a result, it was suggested appropriate size(thickness, diameter) and notch length ratio of brazilan disk on the $G_{max}$. And it was verified that stress intensity factors for mixed mode can be easily calculated with the disk specimen. Stress intensity factors of a concrete brazilian disk were evaluated with finite element analysis and five terms approximation for comparison.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.405-410
• /
• 2021

In this study, a finite element analysis was performed applying a nonlinear material model and fatigue load conditions to evaluate the service life and spring stiffness of the resilient pad for rail fastening system. As a result of the fatigue analysis, the rate of change in spring stiffness compared to the initial condition was about 16%, indicating that fatigue hardening occurred. As for the stress generated in the longitudinal direction of the resilient pad, the difference between the stress generated at the center and the edge was about 10 times or more. In addition, it was analyzed that the equivalent stress of the outer boundary was more than twice as large as that of the central part. Therefore, it was analyzed that the damage and deformation of the resilient pad are the corners of the resilient pad under actual service conditions. The fatigue life diagram of the resilient pad (S-N curve) was derived using the equivalent stress of the resilient pad according to the fatigue cycles. Using the fatigue life diagram of the resilient pad derived in this study, it is considered that it can be used to predict the fatigue life under the relevant conditions by calculating the equivalent stress of the resilient pad under various load conditions.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.23-31
• /
• 2019

The design requirements of modern satellites vary depending on the purpose of operation. Like conventional medium and large-scale satellites, small satellites which operate on low orbit may also serve military purposes. As a result, there is increased demand for high-resolution photos and videos and multi-target observation becomes important. The most important design parameter for multi-target observation is the satellites' maneuverability. For increased maneuverability, the miniaturization is required to increase the stiffness of the satellite as this decreases the mass moment of inertia of the satellite. In the case of a solar panel having relatively low stiffness compared to the satellites' body, vibrations are generated when the attitude maneuver is performed, which greatly influences the image acquisition. For verification of such vibrational characteristics, the satellites is modeled as a reduced model, and experimental zig for simulating attitude maneuver is introduced. A rigidity simulator for simulating the stiffness of the satellite is also proposed. Additionally, the objective of the experimental method is to simulate the maneuvering angle of the satellite based on the winding length of the wire using a step motor, and to experimentally verify the vibration characteristics of the satellite body and the solar panel generated during the maneuvering test.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.23-37
• /
• 2007

Recently a concept of pile-tip enlarged PHC pile (Ext-PHC pile), for use in the auger-drilled construction method, has been developed and is being implemented in practice. A series of field axial load tests on both PHC and Ext-PHC piles were conducted at an experimental site. In addition, a parametric study on a number of influencing factors was made using a validated finite element model. The field axial load tests indicated an enhanced load-settlement characteristics for the Ext-PHC piles compared with the PHC piles, giving approximately 50% increase in the end bearing capacity. Also found in the results of the parametric study was that the increase in the end bearing capacity of Ext-PHC piles slightly varies with the mechanical properties of supporting ground as well as pile length, in the range of 1.25 to 1.4 time that of PHC. Overall, the results of the field tests as well as the numerical study confirmed that the end bearing capacity of PHC pile can be improved by the concept of.Ext-PHC pile.

• Korean Journal of Poultry Science
• /
• v.42 no.1
• /
• pp.77-86
• /
• 2015

Chicken is one of the major livestock, especially for supplying proteins to human. The chicken genome size is approximately one-third compared with that of the human genome and regarded as a valuable model animal for genetics and development biology. In this study, we constructed the genetic linkage map for Korean native chicken (KNC) using 131 microsatellite (MS) and 8 single nucleotide polymorphism (SNP) markers. As a result, the total map length was calculated as 2729.4 cM and the average genetic distance between markers was 19.64 cM. The marker orders and genetic distances were well matched with the consensus linkage map except for the physical order of ADL0278 and MCW0351 in GGA8. In addition, the recombination rates in marcrochromosomes were 3.7 times higher than that of microchromosomes. The average numbers of alleles, expected heterozygosity (Hexp) and polymorphic information content (PIC) values were calculated as 5.5, 0.63 and 0.58, respectively. These results will give useful information for the understanding of genetic structure and QTL studies in KNC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.73-78
• /
• 1994

This experiment was carried out to investigate the major characteristics associated with the flavor rate and their changes according to days after silking of super sweet corn(Cocktail 86) for vegetable and waxy corn(Chalok 1). Ear elongation finished around 22∼24 days after silking. In kernel development, elongation was much more prominant in super sweet corn than that in waxy corn but thickness was vice versa. Pericarp thickness and kernel hardness of super sweet corn were slightly increased but those of waxy corn were increased rapidly as the ears matured. Moisture and sucrose content of super sweet corn remained high but the waxy corn was not. The reducing sugars(glucose, fructose) were relatively high at the early maturity stage but they were decreased as the ears matured and negatively correlated with sucrose and flavor rate. Soluble solids (Brix %) were positively correlated with sucrose and total sugar(sucrose+ glucose+fructose) content in waxy corn but not in super sweet corn and was considered as inappropriate criate criterion to envaluate the sugar content and flavor rate. Pericarp thickness and sucrose content were positively correlated with the flavor rate in both hybrids but total sugar content, and kernel hardness were positively correlated with flavor rate in super sweet corn and waxy corn respectively.