• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.161-166
• /
• 2007

Multi-functional Transport Satellite lR(MTSAT-lR)과 같은 정지궤도 기상위성의 지상 전처리 과정에는 영상위치보정(Image navigation and registration)이 포함된다. 영상위치보정은 위성 영상의 기하학적인 왜곡을 보정하는 과정이다. 랜드마크를 이용하는 영상위치보정 과정은 랜드마크 결정과 센서 모델 추정， 리샘플링(Resampling)의 세 가지 단계로 나눌 수 있다. MTSAT-1R의 High Resolution Image Data(HiRID)는 이미 영상위치보정이 수행되었지만, 기하학적인 오차가 남아있는 영상을 포함하기도 한다. 본 연구에서는 이런 기하학적인 오차를 제거하기 위해서 강인추정 기법에 기반한 기하보정을 수행하였다. 이태윤 등 (2005)은 강인추정 기법과 Direct Linear Transformation (DLT)에 기반한 오정합 판별 방법을 제안하였다. 이 판별 방법을 적용하여 추정된 DLT로 MTSAT-1R 영상의 기하보정을 수행한 결과에는 향상된 정확도로 기하보정 된 영상 뿐만 아니라 비교적 큰 오차를 포함하는 영상도 있었다. 이를 해결하기 위해서 본 연구에서는 강인추정 기법과 Affine 변환을 이용한 방법을 적용하였다. 본 연구에서는 기준 해안선에서 추출한 1,407개의 랜드마크와 8개의 MTSAT-1R 영상을 이용하였으며，강인추정 기법에 DLT를 적용한 방법과 Affine 변환을 적용한 방법으로 자동 기하보정을 수행하여 그 결과를 비교하였다. 또한 강인추정 기볍 중 RANSAC과 MSAC의 적용 결과를 비교하여 보았다. 그 결과，DLT로 기하보정 시，본 논문에서 제안된 방법이 강인추정 기법에 DLT를 적용한 방법 보다 더 좋은 성능을 보여주었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.650-652
• /
• 1998

본 논문은 mesh 간략화를 위한 새로운 Gaussian 곡률 오차 추정 방법을 제안한다. Gaussian 곡률은 임의의 형상을 갖는 삼각화 된 단면체 표면에 대하여 위상과 기하학적 정보를 angle 과 face 의 관계로 정형화하여, vertex에 관한 곡률로 근사하여 표현한다. 간략화 방법은 지역적 형상으로부터 전체적인 형상을 추정한 후, 적절한 curvature criteria 로 간략화가 될 vertex를 선택하고 제거한다. 제거된 vertex에 의해 생성된 hole은 곡률에 기반하여 삼각화하고 곡률이 변화되는 vertex들의 Gaussian 곡률 오차를 계산한다. 각 간략화 level마다 최대 Gaussian 곡률 오차를 계산하므로, 사용자는 Gaussian 곡률 오차 추정으로 원하는 간략화 level을 지정할 수 있다. 또한 주어진 오차 안에서 vertex뿐만 아니라 edge나 face의 제거로, 간략화 되는 영역을 확산시켜 필요한 위상과 기하학적 정보를 유지하는 간략화를 할 수 있다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.288-296
• /
• 2004

This paper proposes a new mesh simplification algorithm using differential error metric. Many simplification algorithms make use of a distance error metric, but it is hard to measure an accurate geometric error for the high-curvature region even though it has a small distance error measured in distance error metric. This paper proposes a new differential error metric that results in unifying a distance metric and its first and second order differentials, which become tangent vector and curvature metric. Since discrete surfaces may be considered as piecewise linear approximation of unknown smooth surfaces, theses differentials can be estimated and we can construct new concept of differential error metric for discrete surfaces with them. For our simplification algorithm based on iterative edge collapses, this differential error metric can assign the new vertex position maintaining the geometry of an original appearance. In this paper, we clearly show that our simplified results have better quality and smaller geometry error than others.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.133-140
• /
• 2016

In active sonar field, a target detection and localization based on a distributed sensor network has been much studied for the underwater surveillance of the coast. Zhou et al. proposed a target localization method utilizing the positions of target-detected sensors in distributed sensor network which consists of detection-only sensors. In contrast with a conventional method, Zhou's method dose not require to estimate the propagation model parameters of detection signal. Also it needs the lower computational complexity, and to transmit less data between network nodes. However, it has large target localization error. So it has been modified for reducing localization error by Ryu. Modified Zhou's method has better estimation performance than Zhou's method, but still relatively large estimation error. In this paper, a target localization method based on modified Zhou's method is proposed for reducing the localization error. The proposed method utilizes the geometry of the positions of target-detected sensors and a line that represents the bearing of target, a line can be found by modified Zhou's method. This paper shows that the proposed method has better target position estimation performance than Zhou's and modified Zhou's method by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1259-1265
• /
• 1997

We investigate depth measurement error of a range finder based on triangulation method. Geometric analysis resulted in intuitive understanding of the error sensitivity. We show that the depth error is propostional to the distance between the object andthe camera. The measurement value has the highest accuracy when the line connecting the focal point of the camera and the object is perpendicular to the line joining the object and the light source of herange finder. Also we analyze the error using a perturbation method and verify that the results are identical through an experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.65-70
• /
• 2005

Incorrect ambiguity integer of GPS make a large error on attitude determination. In this paper one method is suggested for estimating the multipath of GPS carrier measurement while attitude determination. The multi-antenna system consists of 4 antennas have the same clock error help to make attitude determination effectively. If the distance between antennas is a half wavelength, it is not necessary to search the ambiguity integer and the multipath of GPS carrier measurement can be estimated. The results of the simulation are shown and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2102-2112
• /
• 2015

In this paper, we propose a new positioning scheme for accuracy improvement of Relay-based Navigation System. The conventional relay-based system occurs larger vertical error than horizontal one due to structural characteristics that positioning references are located toward same direction and a location of user is estimated by triangulation technique. In the proposed positioning scheme, the user position is reestimated using an additional virtual reference which is generated based on position information of reference stations in navigation signals and estimated initial user position. The nearest reference station from the estimated user position is selected as a virtual reference to minimize the effect of geometrical factor. The vertical error decreases by using reference points on multi planes, therefore, accurate positioning is possible than the conventional scheme. We demonstrated that the accuracy of a user is improved through simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.248-254
• /
• 2013

In location finding system using spaced multi-sensor, there is the phenomenon that the position estimation accuracy is degraded by the location of signal sources and the sensors. This phenomenon is called GDOP(Geometric Dilution Of Precision) effect. and to minimize these effects, research is needed on how. In this paper, I will describe how to minimize GDOP effect, estimating possibility of GDOP using AOA(angle of arrival) information of spaced multi sensors, and removing sensor error factor in position estimation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.245-254
• /
• 2000

This paper proposes a new discrete curvature error metric to generate LOD meshes. For mesh simplification, discrete curvatures are defined with geometric attributes, such as angles and areas of triangular polygonal model, and dihedral angles without any smooth approximation. They can represent characteristics of polygonal surface well. The new error metric based on them, discrete curvature error metric, increases the accuracy of simplified model by preserving the geometric information of original model and can be used as a global error metric. Also we suggest that LOD should be generated not by a simplification ratio but by an error metric. Because LOD means the degree of closeness between original and each level's simplified model. Therefore discrete curvature error metric needs relatively more computations than known other error metrics, but it can efficiently generate and control LOD meshes which preserve overall appearance of original shape and are recognizable explicitly with each level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.99-106
• /
• 2016

In this paper, we will discuss about correction method of missing data on noisy observation matrix and uncertainty analysis for the potential noise. In situations without missing data in an observation matrix, this solution is known to be accurately induced by SVD (Singular Value Decomposition). However, usually the several entries of observation matrix have not been observed and other entries have been perturbed by the influence of noise. In this case, it is difficult to find the solution as well as cause the 3D reconstruction error. Therefore, in order to minimize the 3D reconstruction error, above all things, it is necessary to correct reliably the missing data under noise distribution and to give a quantitative evaluation for the corrected results. This paper focuses on a method for correcting missing data using geometrical properties between 2D projected object and 3D reconstructed shape and for estimating a noise level of the observation matrix using ranks of SVD in order to quantitatively evaluate the performance of the correction algorithm.