• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.67-87
• /
• 1969

1. Objectives and Importance. Many silkworms have been damaged by nuclear polyhedrosis virus diseases thoughout the country every year causing a decease in cocoon production by approximately ten per cent per year. The damage caused by the infections virus has occured in spite of complete disinfection. In this respect, it is well known it is impossible, at the present time, to protect the silkworm from these virus infections through chemical and physical control methods. Therefore, this author has attempted to solve this urgent problem from the view point of heredity and breeding, discovering the different resistances and heritabilities among 120 stains collected from throughout the country, and selecting the ones with highest resistance for the basic materials in the silkworm breeding. 2. Results of work 1) The strains with strong resistance to the nuclear polyhedrosis virus diseases are N$_4$, N$\sub$15/, N$\sub$48/, C$\sub$55/ and Em. the log ED$\sub$50/ values of them vary between 0.799 and 1.611. The susceptible strains are N$\sub$20/, C$\sub$62/, N$\sub$76/, N$\sub$79/ and C$\sub$108/, the log ED$\sub$50/ values of them vary between 5.159 and 7.258. (Reference Table 4) The Japanese strain with a log ED$\sub$50/, value of 3.770 is the strongest, followed by the Chinese strain with a log ED$\sub$50/ value of 3.564. The weakest is the European strain with a log ED$\sub$50/ value of 3.3381. The direction coefficient of the regression equation of the susceptibility varies between 0.1 and 0.6, the uniformness of the resistance of the preserved strains of this country is comparatively low. The hereditary henomena of the resistance of each strain and the conerete method of its application for silkworm breeding main the subjects for later studies. 2) The content of water and ash in silkworm has not been correlated with the capability for resistance to the virus diseases(Reference. Table 8). but it is very significantly correlated with mortality rate (in common reaning). In the case of the silkworms which have just completed the fourth moulting the content of water and ash is not related to the mortality rate. In the case of the silkworms which have just completed the third moulting, however, the water( +0.326) and ash (+0.362) registered a high significance. The ash content in the first ($\div$0.520) and second ($\div$0.386) moults is highly significant but water content in both cases is not significant (Reference Table 7). 3) The No. 205 strain proved to be the best in character among the various F$_1$ hybrids. No. 204 was very good in strength but a little lower in cocoon character than the control. No. 212 was a little low in coccon character and mortality was average, but the cocoon harvest was the best among all the varieties offered for (Reference Table 9). 4), In short, the above mentioned strains which are known to have strong resistance to the virus disease are expected to provide basic data for breeding strong varieties. It is proposed that continued research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.74-83
• /
• 2005

The Riparian Buffer Zone has many potential values including the preservation of water quality as well as being ecologically friendly. This study aims to quantitatively analyze the landscape structure index of the Riparian Buffer Zone in the Kyoung-an stream and to produce base information necessary for proper management. The study used aerial images that were applied to geometric corrections for a time series from 1966 to 2000 for land data and also used FRAGSTATS, which is a type of ARCVIEW extension module, as an analysis tool. An analysis of land use change and the Landscape Index revealed that the area of farm land has decreased and that the area of residential property has increased. In addition, there was a slight change for land used for purposes other than farming or for residence. The results of analyzing the Landscape Structure Index, revealed that the NP has increased from 437 in 1966 to 695 in 2000. This data reveals that the change of land use is influenced by various artificial factors. The NPS, which represents the declining degree of patch, decreased from 9.441 to 5.934, revealing that the change of land use has been progressing considerably. In regard to forest areas, land use reduced somewhat but did not indicate a significant change. Therefore, an analysis of the total index reveals that the edge of patch has become more complicated and that the variation index of patch has increased significantly. However, this study reveals that barriers to block pollution have weakened as a result and that there is a need to concentrate on the implementation and the management of the Riparian Buffer Zone. Consequently, this study reveals that substantial research is necessary in order to carry out the proper management of the Riparian Buffer Zone, especially in light of the distribution type of each patch and the change in conditions regarding them.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.391-400
• /
• 2005

Special Practitioner exists based on the need for special fields that are required to manage difficult patients with specialized skills distinguished from General practitioner. The purpose of dental specialist system is to manage patients who are not treatable by general practitioner by training doctors specializing in one specific field, thereby, enhancing health of the public. Oral Medicine deals with orofacial pain, oral soft tissue disease, forensic dentistry, oral diagnosis. In these days, living environments of city life bring about increase in stress which ultimately lead to increase in prevalence of temporomandibular disorder, oral soft tissue disease, neuropathies such as trigeminal neuralgia, and hence, the number of patients seeking help of those symptoms tend to increase. The purpose of this study was to analyze the rate of referrals and the routes of patients seeking help by investigating 3,707 patients who visited Department of Oral Medicine, College of Dentistry, Yonsei University, from August, 2004 to April, 2005. The results were as follows: 1. The types of disease referred to the Department of Oral Medicine were orofacial pain, oral soft tissue disease, forensic dentistry, oral diagnosis. 2. The rate of referrals was 58.51% which implies that more than half of the patients visiting the Department of Oral Medicine were referred. 3. The types of institution which made referrals were analyzed, and as a result, dental clinics made most of the referrals with the rate of 83.23%, while that from medical or oriental medical institutions was 16.78%. 4. Among the patients who visited the Department of Oral Medicine on their own, 30.52% gained the information about the Department of Oral Medicine from internet and mass media, and from neighbors. From the above results, most of the patients visiting the Department of Oral Medicine were found to be referred not only from the field of dentistry but also from the field of medicine. These suggest that Oral Medicine manages patients who are not treatable by general dental practitioners, and medical specialists tend to cooperate with the Department of Oral Medicine to manage diseases associated with Oral Medicine. Therefore, the role of Oral Medicine can be considered to be important as a special field, and the results of this study should be considered when working out a policy of Dental specialist system on demand and supply of residents in the future.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2012

Purpose: Unlike the existing linear accelerator with photon, proton therapy produces a number of second radiation due to the kinds of nuclide including neutron that is produced from the interaction with matter, and more attention must be paid on the exposure level of radiation workers for this reason. Therefore, thermoluminescence dosimeter (TLD) that is being widely used to measure radiation was utilized to analyze the exposure level of the radiation workers and propose a basic data about the radiation exposure level during the proton therapy. Materials and Methods: The subjects were radiation workers who worked at the proton therapy center of National Cancer Center and TLD Badge was used to compare the measured data of exposure level. In order to check the dispersion of exposure dose on body parts from the second radiation coming out surrounding the beam line of proton, TLD (width and length: 3 mm each) was attached to on the body spots (lateral canthi, neck, nipples, umbilicus, back, wrists) and retained them for 8 working hours, and the average data was obtained after measuring them for 80 hours. Moreover, in order to look into the dispersion of spatial exposure in the treatment room, TLD was attached on the snout, PPS (Patient Positioning System), Pendant, block closet, DIPS (Digital Image Positioning System), Console, doors and measured its exposure dose level during the working hours per day. Results: As a result of measuring exposure level of TLD Badge of radiation workers, quarterly average was 0.174 mSv, yearly average was 0.543 mSv, and after measuring the exposure level of body spots, it showed that the highest exposed body spot was neck and the lowest exposed body spot was back (the middle point of a line connecting both scapula superior angles). Investigation into the spatial exposure according to the workers' movement revealed that the exposure level was highest near the snout and as the distance becomes distant, it went lower. Conclusion: Even a small amount of exposure will eventually increase cumulative dose and exposure dose on a specific body part can bring health risks if one works in a same location for a long period. Therefore, radiation workers must thoroughly manage exposure dose and try their best to minimize it according to ALARA (As Low As Reasonably Achievable) as the International Commission on Radiological Protection (ICRP) recommends.

• Archives of design research
• /
• v.12 no.4
• /
• pp.231-241
• /
• 1999

This study propose to analyze the design method and the form elements of museums, of works by Richard Meier, and through the analysis, spacial characteristics of museums will be understood. The museum works of Richard Meier, as an exhibition space, not only display the art works efficiently, but they also offer visitors the opportunity to experience the art of architecture, as a cultural space. Richard Meier, when working on the projects, has utilized the design methods and the architectural language, learned from Mies van der Rohe and Le Corbusier, resourcefully. Having the structural grid as basis, the rational rectangular forms were intended for exhibition space, while the circular and partial circular forms of geometry were utilized in formative space. This was able to maintain the balance between functional and formative space. In the museums of his works, the ramp and the glass wall separated from the structure become very important means of expression. The ramps, not only make people to enjoy the interior and exterior of museum, but also able them to see the works of art from different distances and angles repeatedly and the large glass wall reveals the various shapes of interior to exterior. In comparing with the design method and language of two masters mentioned, the design principles and elements, developed by Meier were applied to the site plans, exhibition space planning and elevations to manifest its originality. The design concept, derived from the urban fabric and historical buildings around, gave harmony to the museum with its surroundings, and employing the deformed axis brought variation and the effect of diversion to the site plan. The exhibition space is much vitalized by the well arrangement of various exhibition fixtures in the museum. The exhibion fixtures, which the partitions, shelves, miches, and stages were put together in flexibility, play multiple roles as partitions dividing spaces, as furniture displaying art works, and as elements creating forms. The systematically arranged fixtures, also produce several visual axes and centers, which have visitors appreciate the works of art in various perspectives, hence create a unique environment.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1447-1460
• /
• 2021

Urbanization increases the amount of impervious surface and artificial heat emission, resulting in urban heat island (UHI) effect. Local climate zones (LCZ) are a classification scheme for urban areas considering urban land cover characteristics and the geometry and structure of buildings, which can be used for analyzing urban heat island effect in detail. This study aimed to examine the UHI effect by urban structure in Suwon and Daegu using the LCZ scheme. First, the LCZ maps were generated using Landsat 8 images and convolutional neural network (CNN) deep learning over the two cities. Then, Surface UHI (SUHI), which indicates the land surface temperature (LST) difference between urban and rural areas, was analyzed by LCZ class. The results showed that the overall accuracies of the CNN models for LCZ classification were relatively high 87.9% and 81.7% for Suwon and Daegu, respectively. In general, Daegu had higher LST for all LCZ classes than Suwon. For both cities, LST tended to increase with increasing building density with relatively low building height. For both cities, the intensity of SUHI was very high in summer regardless of LCZ classes and was also relatively high except for a few classes in spring and fall. In winter the SUHI intensity was low, resulting in negative values for many LCZ classes. This implies that UHI is very strong in summer, and some urban areas often are colder than rural areas in winter. The research findings demonstrated the applicability of the LCZ data for SUHI analysis and can provide a basis for establishing timely strategies to respond urban on-going climate change over urban areas.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.42 no.1
• /
• pp.35-44
• /
• 2024

The purpose of this study is to investigate the garden architectural characteristics of the Villa Medici a Fiesole, which occupies an important place in the Italian Renaissance garden, and it is concluded as follows. First, the Villa Medici a Fiesole was built between 1451 and 1457 for Giovanni, the son of Cosimo, and then owned by many people and came to the present. It was designed by Michelozzo and is the first newly built Renaissance villa to show Alberti's concept of rural residence. Second, the location is the biggest characteristic of the Villa, which was built on the steep slope of the Fiesole and offers a panoramic view of the landscape of Florence. Third, the overall composition of the garden created using the slope is based on three terraces of different heights, and the overall spatial arrangement is made up of an orthogonal axis at which the vertical and horizontal axes intersect around the villa. Fourth, in the case of vegetation and objects, old paulownia, roses, and potted lemon trees are placed on the first terrace on the three lawn flower beds. Fountain and niche are located at the middle and east end of the terrace. The second terrace cannot be reached through stairs, but only through a villa or a ramp outside the door. The second terrace has a wisteria pergola that leads to a secret garden, and in the center of the pergola, there is a staircase that leads to the third terrace. The Secret Garden takes the form of a quarter garden and consists of an oval pond, a coniferous flowerbed, and magnolias. On the third terrace at the bottom, a symmetrically geometric flowerbed spreads out on both sides of a circular fountain, and large lemon trees are in the center of each flowerbed and four magnolias are planted around the fountain.