• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.55-65
• /
• 2000

구조물 지진해석을 위한 구조물 -지반 상호작용 해석에서도 비선형 지반 특성을 고려한 비선형해석이 요구되고 있어 구조물 비선형 지진 해석을 위해 기초 지반에 대한 수평방향 비선형 해석을 수행하였다. 기초지반은 UBC 분류에서 규정한 보통지반인 Sn 지반과 연약지반인 SE 지반을 고려하였고, 지반의 비선형 특성은 Ramberg-Osgood 모델을 이용하였다. 비선형 지반이 기초지반 수평 및 회전 동적 강성 및 감쇠비에 미치는 영향을 조사하기 위하여 얕은 기초와 묻힌기초에 대해 기초 크기, 지반깊이 및 말뚝유무에 따른 동적 강성 및 감쇠비 변화를 조사하였는데, 지반의 비선형 특성이 기초지반의 선형 수평 및 회전 강성과 감쇠비를 크게 감소 또는 증가시키는 것으로 나타났으며, 기초크기, 지반깊이 및 말뚝유무의 영향도 큰 것으로 나타나 구조물 지진해석시 기초크기, 지반깊이 및 말뚝유무와 함께 지반의 비선형성도 고려하는 것이 필요한 것으로 판단되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.205-215
• /
• 1992

Load tests for fourteen small-scale foundation models combined with geotextile, sand mat and rigid mat were conducted to study the effect of geotextile(G/T), sand mat(S/M), and foundation types on deformation of foundation soils. In addition, the experimental results were compared with those obtained from numerical analysis using a software program. The main conclusions were summarized as follows: 1. The restraint effect on G/T is more outstanding on the lateral displacement than on the vertical one. 2. The single use of S/M has better effect on the restraint of vertical displacement than lateral one. 3. The use of both S/M and G/T is required for the restraint of lateral and vertical displacement. 4. Multi-layered foundation with large rigidity shows similar tendency to that of foundation reinforced with S/M and G/T.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.5-15
• /
• 2017

To perform an integrated load analysis carried out to evaluate the stability evaluation of wind turbine generators, the six degree-of-freedom stiffness matrix of foundation, which describes relationships between loads and displacement, is needed. Since the foundation stiffness should accurately reflect the shape of foundation and the condition of soil, it is necessary to calculate the stiffness of the bucket foundation that considers the elasto-plastic behavior of the soil. In this study, finite element analyses were performed for a range of soils and shapes of bucket foundations to estimate the foundation stiffness. Normalized stiffness curves are developed from respective numerical simulations. Proposed results are considered to be useful because they can be directly applied in the design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.498-503
• /
• 2009

얕은기초의 침하량은 기초강성에 따라 크게 좌우되지만 기존의 이론적인 연구결과는 실무에 적 하기에 불충분하였다. 그러므로, 본 연구에서는 3차원 수치해석법을 이용하여 직사각형 기초의 길이비에 따른 강성 보정계수를 산정하고자 하였다. 우선, Mayne & Poulos(1999)가 정사각형 기초에 대하여 제안한 강성 보정계수와 비교하여 본 수치해석 기법의 적용성을 검증하였다. 그리고, 검증된 수치해석 기법을 적용하여 직사각형 기초의 길이비를 L/B=1, 2, 5로 달리하여 해석을 수행하였다. 그 결과, 동일한 기초강성에서 기초의 길이비(L/B)가 증가함에 따라 강성 보정계수 값이 점차 증가하는 결과를 보여주었다. 그러나 L/B=5 인 경우에는 강성계수가 10이상 되더라도 기초는 완전강성 거동을 보이지 않았다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.41-51
• /
• 2008

The load distribution and deformation of single piles which is embedded in Jumunjin sand and Kimhae clay are investigated, based on small scale model tests. Special attention is given to the consideration of flexural rigidity in laterally loaded piles. To consider the flexural rigidity of the pile, tests are performed with the aluminium piles of three different length under different relative densities and undrained shear strength. The test results indicate that the initial slope from the results of tests is proportional to the depth and pile-soil rigidity in both soils. But the increasing rate of the initial slope in the clay is less than in the sand. In addition, the soil resistance is more related to the depth and soil condition than the pile rigidity. Base on the test results, an empirical formula is proposed, which is good agreement with previously published small scale model test and field lateral load test.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.173-180
• /
• 2006

The seismic responses of a building are affected by the base soil conditions. In this study, linear time-history seismic analysis and nonlinear pushover static seismic analysis were performed to estimate the base shear forces of 3-, 5-, and 7-story steel buildings, considering the rigid and soft soil conditions. Foundation soil stiffness, based on the equivalent static stiffness formula, is used for the damper, one of the Link elements in SAP 2000. The base shear forces of the steel buildings, estimated through time-history analysis using the general-purpose structural-analysis program of SAP 2000, were compared with those calculated using the domestic seismic design code, the UBC-97 design response spectrum. and pushover static nonlinear analysis. The steel buildings designed for gravity and wind loads showed elastic responses with a moderate earthquake of 0.11 g, while the elastic soft-soil layer increased the displacement and the base shear force of the buildings due to soil-structure interaction and soil amplification. Therefore, considering the characteristics of the soft-soil layer, it is more reasonable to perform an elastic seismic analysis of a building's structure during weak or moderate earthquakes.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.19-27
• /
• 2001

In this seismic analyses of structures, it is well recognized that the effects of soil-structure interaction can not be ignored and seismic responses of a structure taking into account the stiffnesses of a foundation-soil system show the significant difference from those with a rigid base. However, current seismic analyses of apartment building structures were carried out with the rigid base ignoring the characteristics of the foundation and the properties of the underlying soil. In this study, seismic analyses of wall-slob type apartment buildings which have a particular structural type were carried out taking into account the soft soil layer comparing seismic response spectra of a flexible base with those of a rigid base and UBC-97. Low-rise or middle height wall-slab type apartment buildings built on the deep soft soil layer showed a rigid body motion with the reduced seismic responses due to the base isolation effect, indicating that it is considerably safe but uneconomical to utilize the design spectra of UB-97 for the seismic design of wall-slab type apartment buildings due to conservative design.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.398-403
• /
• 1996

이 논문에서는 지반과 기초를 일반적인 3차원 유한요소로 모델링하고, 유한요소의 바깥영역은 일반적인 모드의 축대칭 유한요소와 축대칭 Hyperelement를 사용하여 전달경계로 모델링하여, 유한요소와 전달경계의 경계에서 두 요소간의 연계에 의하여 기초에서의 동적강성행렬을 구한다. 이를 위하여 3차원 유한요소와 축대칭 요소간의 연계방법을 제안한다. 제시되는 기초의 동적강성행렬은 x,y,z방향의 병진성분과 x,y,z축에 관한 회전성분의 6자유도로 표현된다. 이 논문에서 사용한 3차원 유한요소와 축대칭 요소의 연계 방법의 검증을 위하여 구형기초와 등가의 강성을 갖는 강체원형기초의 동적강성행렬을 구하고 이를 비교하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.127-137
• /
• 2018

Gravel Compaction Pile (hereinafter referred to as GCP) is a ground improvement technique by packing crushed stones on fragile clay ground, pressing it, and forming stakes on the foundation. Although many researchers have analyzed stress behavior of GCP composite ground on domestic GCP technique using laboratory experiment and field experiment, analyses of stress behavior according to the difference of stiffness of mat foundation loaded on the upper foundation of GCP composite ground have not been done actively. Therefore, this study aimed to identify the stress concentration ratio in accordance with the difference of basis stiffness by interpreting figures. To perform this, replacement ratio was changed and modelled using ABAQUS, software for finite element analysis and analyzed the stress concentration ratio, amounts of settlement, and maximum amounts of horizontal displacement of composite ground in accordance with the difference of stiffness. An analysis showed that the stress concentration ratio of rigid foundation was highly assessed than unloading of flexible foundation in case of unloading, while amounts of settlement under flexible unloading condition were slightly higher than under rigid condition. This indicates that the characteristic of stress behavior on the different stiffness of upper foundation needs to be clarified. In addition, the maximum horizontal displacement was generated in a constant level regardless of the difference of stiffness.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.7-19
• /
• 2002

This paper presents the results of an investigation on the effect of foundation stiffness on the performance of soil-reinforced segmental retaining walls (SRWalls). Laboratory model tests were performed using a reduced-scale physical model to capture the fundamentals of the manner in which the foundation stiffness affects the behavior of SRWalls. A series of finite-element analyses were additionally performed on a prototype wall in order to supplement the findings from the model tests and to examine full-scale behavior of SRWalls encountered in the field. The results of the present investigation indicate that lateral wall displacements significantly increase with the decrease of the foundation stiffness. Also revealed is that the increase in wall displacements is likely to be caused by the rigid body movement of the reinforced soil mass with negligible internal deformation within the reinforced soil mass. The findings from this study support the current design approaches, in which the problem concerning the foundation condition are treated in the frame work of the external stability rather than the internal stability. The implications of the findings from this study to current design approaches are discussed in detail.