• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.65-66
• /
• 1997

1. 서론 : 현재의 막분리 기술로는 단 단계 분리공정(single-stage separation)으로 약 40%의 산소농축공기(oxygen-enriched air)를 얻을 수 밖에 없지만 심냉법(cryogenic techniques)보다는 에너지 소비율이 적으며, 공정이 비교적 간단하기 때문에 용도에 따라 순 산소를 꼭 필요로 하지 않는 제철소, 발전소 등의 연소분야, 호흡기 환자를 위한 의료분야, 생물공학이나 항공기 분야 등에 편리하게 이용될 수 있다. 이와 같이 용도가 다양한 산소를 분리막을 이용하여 보다 편리하고 값싸게 얻기 위해서는 산소와 질소의 막투과에 대한 새로운 지식을 얻고 막투과가 기체의 어떤 성질에 지배되고 있는가를 조사할 필요가 있다. 본 연구에서는 고무상 고분자막(rubbery polymer membrane)에 대한 산소/질소의 수착특성과 순수한 기체의 투과율(permeation rate)을 기초로 하여 혼합기체의 투과율, 분리인자(separation factor), 막분리 공정변수에 의한 중공사 분리막에서의 기체분리특성에 대하여 연구하였다.

• The Microorganisms and Industry
• /
• v.20 no.2
• /
• pp.41-45
• /
• 1994

실관막은 단위부피당 표면적이 커서 상과 상간의 물질전달속도를 증가시킬수 있다는 장점때문에 효소, 미생물, 동식물의 고정화 반응기로써 많은 연구가 진행되어 왔다(1,2). 실관반응기는 이러한 장점이외에도 고정화가 수월하며, 생산물과의 1차분리가 이루어지며, scale-up시 에너지 소모가 적다는 장점을 가지고 있다. 그러나, 불용성 기질을 사용할 경우, 실관막 기공의 막힘으로 인해 장시간의 조업이 어렵고, 고분자 재질 실관막의 경ㅇ, 몇몇 특수 재질을 제외하고 고온/고압 멸균이 불가능하다는 단점을 지니고 있다. 또한 반응기의 구조상 기체의 원할한 공급이 어려우므로 산소소비속도가 빠른 호기성 미생물 배양을 위해서는 이중실관막과 같은 특수설계의 실관 반응기가 이용될 수 있다(3,4). Fig. 1은 독일 Enka사의 polypropylene 실관의 단면과 전형적인 조업방식을 보여준다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.207-217
• /
• 1992

In this study, isolated and cultured nitrogen fixed microbes were seeded in the three-phase fluidized bed in which gas, solid and liquid were contacted directly. Input velocity was varied from 8.12 cm/hr to 16.32 cm/hr. And upflow gas pressure was fixed to 80 psi. Return ratios were from 0.2 to 0.6 with the each experimental condition. According to these condition, movement of media, growth of biofilm and removal efficiency were measured. As the results, in case of briquette ash, biofilm was developed to $170{\mu}m$ when velocity was 8.12 cm/hr and return ratio was 0.6. In this condition, COD removal efficiency was 97% and $NH_4$-N removal efficiency was 83%. At the same condition, biofilm thickness of glass bead was $17.59{\mu}m$ and its COD and $NH_4$-N removal efficiency was 83% and 72%. Nitrogen fixed microbes have following characters: it formed dark-brownish sludge, excellent adhesive force, easy solid-liquid separation and low oxygen uptake ratio, but sensitive to DO concentration. Not only it endured shock loading, but required short time to steady state.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.985-996
• /
• 2006

As the internet technologies develop, the geographic information system environment is changing to the web-based service. Since geospatial information of the existing Web-GIS services were developed independently, there is no interoperability to support diverse map formats. In spite of the same geospatial information object it can be used for various proposes that is duplicated in GIS separately. It needs intelligent strategies for optimal replica selection, which is identification of replication geospatial information objects. And for management of replication objects, OMG, GLOBE and GRID computing suggested related frameworks. But these researches are not thorough going enough in case of geospatial information object. This paper presents a model of location service, which is supported for optimal selection among replication and management of replication objects. It is consist of tree main services. The first is binding service which can save names and properties of object defined by users according to service offers and enable clients to search them on the service of offers. The second is location service which can manage location information with contact records. And obtains performance information by the Load Sharing Facility on system independently with contact address. The third is intelligent selection service which can obtain basic/performance information from the binding service/location service and provide both faster access and better performance characteristics by rules as intelligent model based on rough sets. For the validity of location service model, this research presents the processes of location service execution with Graphic User Interface.