• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.485-491
• /
• 2012

The wall interference effects around the wind-turbine airfoil are experimentally investigated at low Reynolds numbers in a closed test-section wind tunnel. The test is performed at free-stream velocities from 10 to 31 m/s, which correspond to Reynolds numbers ranging from $1.5{\times}10^5$ to $4.6{\times}10^5$ based on chord of the airfoil. The blockage-area ratios, which is the ratio of the chord to the test-section width, are 27.8%, 38.5%, 41.7%, 45.5%, and 55.6%. The test results for the airfoil show that the transition point on the airfoil surface tends to move backward due to wall interference. The wall pressures for an adequate interference correction by a measured-boundary-condition method are desirable more than three times region of the chord before and after around the reference center.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.187-194
• /
• 2002

본 논문에서는 SPOT 입체영상을 이용하여 광범위한 지역의 DEM을 제작할 경우 DEM 모자이크 과정에서 발생할 수 있는 접합선(seam-line)을 최소화할 수 있는 방법을 연구하였다. 지상의 60km$\times$60km 영역을 촬영할 수 있는 SPOT 위성의 입체 영상으로부터 구성한 단일 모델은 일반적으로 관심 있는 지역의 DEM을 제작하기에 충분히 넓은 지역을 포함할 수 있다. 그러나 광범위한 지역의 DEM 제작을 위해서는, 각각의 입체영상을 통해 제작된 DEM들을 접합해야 하며, 이 때 발생되는 접합선을 효과적으로 제거하는 작업이 필요하다. 이를 위해 SPOT 위성영상의 블록 조정 방법을 이용하여 종횡접합모델을 구성하고 중복되는 인접한 SPOT DEM간의 표고값을 일치시키므로써 DEM 접합선의 발생을 최소화하여 모자이크시 작업량을 줄이고자 한다. 본 논문에서는 기존의 지상기준점과 추가로 관측한 영상접합점을 이용하여 종횡접합 블록을 구성하고 광속조정 방법을 적용하여 블록에 포함된 위성영상의 외부표정요소를 계산하였다. 블록모델을 이용하여 DEM을 제작할 경우 접합선 탐색 및 blending 작업 없이 단순중첩 방법으로도 DEM 모자이크 작업을 빠르게 수행할 수 있음을 확인하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.214-215
• /
• 2012

본원적 큐브란 사용자의 얼굴을 다각면에서 추출하여 주성분분석(PCA: Principal component analysis)을 통해 다차원 정보를 통합하여 큐브형태로 표현된 것을 의미한다. 두 눈의 연결점과 입의 연결점을 이은 후 그 둘의 법선벡터를 얼굴의 방향으로 표현하는 것으로써 평면 사진에 얼굴방향을 부여한다. 그럴 경우 동일인물의 다양한 사진들을 모았을 경우 각 사진들이 얼굴방향을 달리하는 사진큐브로 표현될 수 있다. 이로써 기존에는 얼굴방향이 다른 동일인물의 사진을 정확하게 구분해 낼 수 없던 한계를 뛰어넘을 수 있다. 또한 큐브는 방향이 조금씩 다른 모든 사진을 저장할 필요가 없으므로 저장공간이 크게 절감되는 장점이 있다. 또한 단체 사진에서 개인의 이미지를 추출한 뒤 본 연구의 큐브와 매칭시켜 인물을 탐색하거나 소유한 이미지를 공유하는 기법을 포함한다. 결과적으로 큐브를 활용하여 효과적으로 인물탐색이 가능 해지는 것이다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.254-259
• /
• 2008

지형의 표고값물 격자간격으로 표현하는 수치표고모델(DEM)은 지형분석을 위한 GIS데이터 활용과 휴대전화 중계안테나의 영향권 분석, 정밀지오이드 계산을 위한 지형효과계산 등 여러 가지 분야에 활용되고 있다. 본 연구에서는 이렇게 활용성이 증가하고 있는 수치표고모델을 수집하고 또 진주시 지역을 대상으로 LiDAR촬영을 통한 LiDAR 수치표고모델을 구축하여 그 정확도를 분석하고자 하였다. 연구에 활용된 수치표고모델은 GTOPO30, SRTM-3, 지형도(1/50,000) 독취 DEM, 환경부 DEM, 항공사진에 의해 생성된 DEM, 그리고 LiDAR DEM의 6가지이며, 정확도 분석을 위해 GPS측량과 수준측량이 동시에 실시된 409점의 진주시 3차원 도시기준점 성과를 이용하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.202-205
• /
• 2007

본 논문에서는 3D 점집합으로부터 3D 메쉬를 생성하는 효율적인 기법을 소개한다. 대표적인 3D 삼각화 방법으로 3D Delaunay 삼각화 기법이 있으나 물체의 표면만을 고려한 메쉬 생성을 위한 방법으로 비효율적인 측면이 있다. 본 논문에서는 적은 계산량으로 물체의 표면 메쉬를 생성하는 기법을 소개한다. 물체의 각 영역을 분할하고 각 영역에 대해서 2D Delaunay 삼각화를 적용하여 3D 메쉬 구조를 얻는다. 3차원 점 집합에 대해 OBB를 계산하고 이를 기준으로 점집합을 다양한 각도에서 자르고 각 부분 점집합에 대해서 2D Delaunay 삼각화를 실시한다. 절단하는 각도의 간격이나 폭은 원래의 3D 점집합에서의 가장 가까운 이웃점들까지의 평균 거리를 이용하여 결정하도록 하였다. 후처리 과정으로 삼각 분할과정에서 잘못된 에지의 연결을 제거함으로써 객체의 삼각 분할 결과를 향상시킨다. 제안된 메쉬 생성 기법은 다양한 영상 기반 모델링 응용에서 효과적으로 적용될 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.266-271
• /
• 2002

The finite schematic eye based on spherical aberration and Stiles-Crawford effect is designed by an optimization method. It consists of four aspherical surfaces. The radius of curvature, thickness, asphericity, and spherical aberration are used as constraints in the optimization process. Stiles-Crawford effect in the pupil is considered as a weighting value for optimum design. The designed schematic eye has effective focal length of 20.8169 mm, back focal length of 15.4820 mm, front focal length of -13.8528 mm, and image distance of 15.7150 mm. When the pupil diameter is 4 mm, the diameter of entrance pupil and exit pupil are 4.6919 mm and 4.2395 mm, respectively. From the data of 75 measured Korean emmetropic eyes, this finite schematic eye is designed first in Korea.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.59-72
• /
• 2012

In aspects of traffic operation, a climbing lane may cause traffic congestion if the volume of traffic (v/c) grows and the ratio of heavy vehicle increases. Conversely, it would be effective, if the climbing lane is dynamically operated according to changes in traffic flow. However, there are no guideline to effectively control this climbing lane in aspects of traffic operation. In this study, we examine the necessity of flexible traffic operation criteria and its process for dynamic traffic management and also establish and analyze the effect of flexible traffic operation criteria in accordance with traffic properties using an example of climbing lane. We selected the operation criteria (critical travel speed), which decides whether to operate or close the climbing lane when the average travel speed of climbing lane is 50km/h based on VISSM (microscopic traffic simulation) analysis of Nakdong junction towards Masan with the volume of traffic (v/c), ratio of heavy vehicle as the traffic operation parameters. Based on the simulation result in accordance with the volume of traffic by the operation mode of climbing lane, the analysis on the effect of dynamic traffic management of climbing lane showed that the dynamic traffic management provides more convenience compare to the operation and close of climbing lane. Thereby, we proved that the dynamic traffic management of climbing lane is more effective.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.183-200
• /
• 2024

Recently, with the MZ generation's entry into society and the social participation of the female population, conflicts are occurring between workplace groups that value WLB and existing groups that emphasize collaboration due to differences in work orientation. Public institutions and companies that utilize work-life balance support systems show differences in job Commitment depending on the nature of the work and the activation of the support system. Accordingly, it is necessary to verify the effectiveness of the WLB support system actually operated by the company and present universally valid standards. The purpose of this study is, first, to verify the effectiveness of the support system for work-life balance and to find practical consensus amid changes in policies and perceptions of the working environment. Second, the influence of work-life balance level and job immersion according to work characteristics was analyzed to verify the mutual influence in order to establish standards for WLB operation that reflects work characteristics. For the study, a 2X2 matrix model was used to analyze the impact of work-life balance and work characteristics on job commitment, and four hypotheses were established. First, analysis of the job involvement level of conflict-type group members, second, analysis of the job involvement level of leading group members, third, analysis of the job involvement level of agreeable group members, and fourth, analysis of the job involvement level of cooperative group members. To conduct this study, an online survey was conducted targeting employees working in public institutions and large corporations. The survey was conducted for a total of 9 days from October 23 to 31, 2023, and 163 people responded, and the analysis was based on a valid sample of 152 people, excluding 11 copies that were insincere responses or gave up midway. As a result of the study's hypothesis testing, first, the conflict type group was found to have the lowest level of job engagement at 1.43. Second, the proactive group showed the highest level of job engagement at 4.54. Third, the conformity group showed a slightly lower level of job involvement at 2.58. Fourth, the cooperative group showed a slightly higher level of job involvement at 3.80. The academic implications of the study are that it subdivides employees' personalities into factors based on the level of work-life balance and nature of work. The practical implications of the study are that it analyzes the effectiveness of WLB support systems operated by public institutions and large corporations by grouping them.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.113-124
• /
• 2019

Today many companies are offering IoT-enabled products and place emphasis on security from the planning stage to protect their products and user information from external threats. The present security levels, however, remain low because the time and resources invested in developing security requirements for each device are far from enough to meet the needs of a wide range of IoT products. Nevertheless, vulnerabilities of IoT devices have been reported continuously, which calls for more detailed security requirements for home IoT devices. In this context, this research identified threats of home IoT systems by using Microsoft Threat Modeling Tool. It then suggested measures to enhance the security of home IoT devices by developing security assessment items through comparative analysis of the identified threats, domestic and global vulnerability assessment standards and related research. It also verified the effectiveness of the developed security requirements by testing them against the existing ones, and the results revealed the security requirements developed in this research proved to be more effective in identifying vulnerabilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6204-6210
• /
• 2013

This study examined adomestic firm's perspective on how their choice of partner selection criteria affects the mediating variables and the performance of international strategic alliances with particular reference to previous experience as a moderating variable. The findings of this study showed that the task-related and partner-related criteria are both positively related to trust and commitment but the results concerning the partner-related criteria repudiates the existing practices that domestic firms select foreign partners based on the partners' attributes because this weaken the commitment of the partnership. This study suggests that firms should revise their partner selection criteria, which will eventually lead to the more desirable performance of international strategic alliances.