• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.135-140
• /
• 2022

Most machines are made of several types of . In particular, the shaft system of the ship consists of the brass of the propeller blade and the stainless steel of the shaft. When dissimilar the electrolyte solution of seawater, a voltaic cell and a shaft electromotive force is generated. This electromotive force causes electrical corrosion of the bearing and shaft supporting the shaft system. prevent this corrosion, a shaft grounding system is installed in ships. As for the experimental method, various information acquired by designing a program to periodically measure the electromotive force of the controllable pitchpropeller) system using an A/D converter of NI. This study analyzed the generation and characteristics of accumulator electromotive force for CPP and considered the installation location of the grounding system to remove the accumulator electromotive force.

• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.635-641
• /
• 1993

Electrochemical cell, $Pt|air(PO_2=5.3{\times}10^{-3}atm)|Zr_{0.85}Ca_{0.15}O_{1.85}|air(PO_2= 0.21atm)|Pt$, has been designed to characterize the solid electrolyte and the temperature dependence of the electromotive force (EMF) has been measured in a temperature range of 600∼1000${\circ}$C. Solid electrolyte shows pure ionic conduction of the oxygen anion. The Fe-FexO, Co-CoO, Ni-NiO, and Cu2O-CuO electrodes have been prepared by mixing the 1 : 1 mole ratio of each metal and metal oxide and then by heating at 800${\circ}$C for 6 hours. Electrochemical cells, Pt│M(s), $MO(s)|Zr_{0.85}Ca_{0.15}O_{1.85}|air(PO_2=0.21atm)|Pt$, have been designed and the temperature dependence of the EMF has also been measured in the same temperature range. The changes of the thermodynamic state functions for the formation of the metal oxides are calculated from the electromotive forces and their temperature dependences. The material properties of the oxide systems are also discussed with the function changes.

• Journal of Energy Engineering
• /
• v.19 no.3
• /
• pp.188-194
• /
• 2010

Direct Carbon Fuel Cell(DCFC), unlike gas turbines or engines, is a kind of fuel cell which directly generates electricity by electrochemical reaction from a carbon fuel. The advantages of DCFC are higher efficiency and lower emission in comparison with existing power generation facilities. In this study, the effects of CO and $CO_2$ on theoretical potential are examined using the thermodynamic equilibrium method, and the dependence of product on operating temperature is examined via two dimensional CFD method. As a result, when the reaction of CO production (Boudouard reaction) considered, theoretical potential is higher than that in only $CO_2$ reactions, and its value increases as temperature increases. Two dimensional results of computational fluid dynamics(CFD) confirm that the Boudouard reaction becomes more important to be considered as temperature increases and inert gas affects the equilibrium composition of the Boudouard reaction.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.61-67
• /
• 1994

In order to investigate the effects of heat treatment on the thermoelectric motive force (EMF) of type R thermocouples, the changes of EMF in the freezing points of aluminum and silver cells were measured with the immersion depth of themocouples. With the variation of heat treatment methods before use, it was found that the EMF values were different from each other, maximum $17.1{\mu}V$ at $660.323^{\circ}C$ and $18.1{\mu}V$ at $961.78^{\circ}C$. Additionally a thermocouple, which was not heat-treated fully, showed an EMF difference with the immersion depth even though it was located on the region maintained at the constant temperature. The measured differences were about maximum $7.8{\mu}V$ at the Al freezing point and $18.9{\mu}V$ at the Ag freezing point. It was recongnized that a thermocouple for the precise temperature measurement should be heat-treated carefully before service. In this report, the proper heat treatment methods for the type R thermocouple were given on the basis of the obtained experimental results.

• The Korean Journal of Pharmacology
• /
• v.31 no.1 s.57
• /
• pp.53-61
• /
• 1995

The experiments were performed to determine whether the cardiac depressant action of lidocaine is directly associated with the utilization of endogenous substrates in isolated rat atria, by using citrate and bicarbonate-free medium known as potent inhibitors of phosphofructokinases (PFK) enzyme step. Citrate and bicarbonate-free medium produced negative inotropic action of isolated rat atria incubated in normal Krebs-Ringer bicarbonate glucose medium. Pyruvate and acetate increased the force of contraction of atria depressed by citrate or bicarbonate-free medium, whereas fructose was without effect indicating the inhibitory effect of citrate and bicarbonate-free medium at some point in the glycolytic pathway such as the PFK step in atria. In the absence of exogenous substrate, citrate and bicarbonate-free medium produced a marked depression of the force of substrate-depleted atria indicating that utilization of endogenous substrate above the PFK step, probably cardiac glycogen, is also impaired by citrate or bicarbonate-free medium. Lidocaine produced further depression of the contractile force of atria depressed by citrate. These results argue strongly for an additional mechanism of cardiac depression caused by lidocaine involving the sites below the PFK.

• Journal of the korean veterinary medical association
• /
• v.34 no.8
• /
• pp.547-550
• /
• 1998

수의사들은 수캐와 고양이를 구입하기전 수캐의 번식력에 대한 검사를 요청 받을 때가 가끔 있다. 미국의 경우 Kennel club 지침에서는 7개월 보다 어린 개 또는 12세 이상된 개를 종견으로 등록할때는 번식력에 대한 소견서 혹은 증명서를 제출하여야만 한다고 되어있다. 번식력 검사에는 수캐의 완전한 병력을 수집해야하며 병력으로 과거 상처, 질병, 예방접종, 투약상태, 고환이 음낭으로 하강한 상태, 년령, 음낭부종 또는 외상의 발생상태 등이 포함되어야한다. 또한 애완동물의 가계에 대한 번식력에 대해서도 찾아보도록 노력해야 한다. 환축을 검사하기전 병력을 축주에 문의하는 것도 하나의 좋은 방법이다. 건강한 수컷이 암캐와 교미를 하지 못할 경우에는 번식관리의 검사에 세심한 주의를 기우려야 한다. 또한 산자의 최종출생일, 산자수, 교미회수, 번식시킨 암컷의 수, 교미형태, 수컷의 성욕 및 승가행위 등에 과한 것들을 조사해야 할 것이다. 이러한 병력으로 수컷은 항상 불임성을 최초에 불임성을 보였는지 또는 저임성을 보였는지를 알수있게 된다. 새끼를 낳아보지 못한 개와 고양이는 선천적으로 불임이 되고 이러한 수컷도 예후는 불량하다. 개와 고양이가 과거에 새끼를 임신한 경험이 없다면 생식기의 전염성 또는 염증과 관련이 있을 수도 있다. 축주는 개 인공수정을 하기 위하여 정액을 채취할 때 물, 소독약 및 윤활제 등으로 인하여 정자의 사멸을 의식하지 못하고 있기 때문에 채취방법을 상세하게 설명하여 주어야 한다. 또한 암컷의 번식문제에 대해서도 상세하게 검사하여야 하며 개와 고양이가 불임되는 가장 흔한 이유는 번식관리에 문제점이 있으며, 이와 같은 경우에는 암컷을 검사하기 전에 수컷을 검사하는 것이 중요하다. 수컷의 검사는 사진으로도 용이하므로 비용도 절감되나 암컷은 생식기관을 검사하여야 되기 때문에 많은 경비가 든다. 그러나 번식력의 유일한 증거는 태아를 생산하는 것이며 많은 다른 검사 방법으로 평가 할 수도 있으나 번식력을 증명할 수는 없다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.128-128
• /
• 1999

산소이온 전도체로 잘 알려진 Yttira-Stabilizd Ziroconia(TSZ)는 연료전지, oxygen pumps, chemical gas sensor 등 다양한 electrochemical divices에 이용되는 고체 전해질의 하나이다. 특히 YSZ는 oxygen 및 oxygen과 평형상태에 있는 gas들을 검출하는 sensor의 electrolyte로서 가장 많이 쓰이고 있다. 현재 상용화되어 있는 YSZ Sensor는 전통적인 bulk 형태의 ceramic으로 제작된 것으로 충분한 ionic conductivity를 얻기 위해서는 $600^{\circ}C$이상의 operating temperature를 필요로 하나 YSZ를 박막으로 제조시 낮은 operating temperature를 뿐만 아니라 sensor의 소형화, 낮은 ohmic loss 및 다양한 응용이 가능한 장점을 가질 수 있다. 본 실험에서는 산소 이온 전도체로서 8mol%-YSZ 고체전해질을 RF-magnetron bias sputtering 법을 이용하여 증착하였다. 제조된 YSZ 박막을 이용한 산소감응 센서셀 구조는 SiO2/Ni-NiO/Pt/YSZ/Pt-기판이다. 센서셀의 정상상태에서의 기전력(electromotive force ; EMF)을 산소분압(Po:1.013$\times$103Ta ~1.013$\times$105Pa)과 측정온도(30$0^{\circ}C$~$700^{\circ}C$)를 변화시키며 측정하였다. 이론적인 기전력과 측정값 사이의 편차는 Po:1.565$\times$104Pa 이하의 산소분압에서는 컸지만 이 이상의 분압에서는 이론치에 근접한 값을 가졌다. 증착한 YSZ와 Ni-NiO 박막의 구조는 X-ray diffractometer(XRD)를 이용하여 결정구조를 알아 보았고, TSZ 박막의 표면 morphology 관찰은 Scanning electron microscopy(SEM) 이용하였다. 박막의 조성분석은 X-ray energy dispersive analysis(EDX)을 사용하였다.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.104-109
• /
• 2004

The mechanical synthesis of thermoelectric material $FeSi_2$ by planetary ball mill has been investigated. The homogeneous and amorphous mixture of Fe-Si has been obtained by mechanical alloying for 850 rpm-40 min. The $\beta-FeSi_2$ powder could be synthesized by 1123 K-3 hr annealing heat treatment after mechanical alloying for 850 rpm-10, 20, and 40 min. The ceramic samples doped with the maximum content up to $10\;at.\;\%$ Co have exhibited semiconduction phenomena and maximum thermoelectric powder at 440K.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.675-683
• /
• 2009

A Basic experimental study for the development of vibration-power generation system from the vibration energy of urban infrastructure, such as a railroad, highway, and bridges, was carried out to harvest electricity from moving vehicles. Starting with the proposal of vibration power generator which converts vibration energy to an electric power by using self-induction technology, the research explains the basic concept of self-induction technology and the dynamic characteristics of a ibration power generator. Also, in order to analyze the correlation of an electromotive force from vibration power generator which depends on external force and vibration speeds, many indoor experiments with various variables were achieved. Based on the experimental results, a vibration power generator system's ability were analyzed. With those results, basic data of vibration power generator system to acquire the maximum available power was confirmed.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.204-210
• /
• 2000

The control of dissolved aluminum concentration in the hot dip zinc galvanizing bath is greatly important in producing galvannealed steel sheets. The purpose of present study is to provide basic data for measurement of the aluminum concentration in site in hot dip zinc bath at the temperature of $460^{\circ}C\~500^{\circ}C$ using $CaF_2$ solid electrolyte sensor with three kinds of reference electrode. Good workability and stability of the sensor were confirmed with the $Bi+BiF_3$ reference electrode from the emf measurement. In order to measure the aluminum concentration in Zn-Al bath, the galvanic cell of fluorine ion was constructed with $CaF_2$ solid electrolyte as follows; $$(-)W|Zn-Al,\;AlF_3|CaF_2|Bi,BiF_3|W(+)$$. The emf measurement was made at the temperature of $460\pm10^{\circ}C$ in the Zn-Al bath. The following correlationship between aluminum concentration and emf was obtained by the least square regression analysis; $$E/mV=56.795log[\%Al]+1881.7\;R=0.9704$$,$$0.026wt\%{\leq}[\%Al]{\leq}0.984wt\%$$