• International Area Studies Review
• /
• v.15 no.2
• /
• pp.151-173
• /
• 2011

The purpose of this paper is to examine the impact of production factors on economic growth in China during 1979~2008. In order to grasp the determinant and contribution analysis, we take fixed effect model and random effect model and Hausman test to choice model. The results show that the finance variable (rsav) and SOC variable (rsoc) have negative effects on the economic growth in the long run except some models. But unimproved raw labor variable (rlab), physical capital variable (rcap) and education variable (redu) shows strongly positive effect for the same time. We found the meaning of coefficients of growth factors. relative contribution of each input to per-capita growth in China. The direct elative contribution of physical investment to per-capita growth gives 35.9 percent in total model (TMO) and unimproved raw labor contributes only 4.7 percent. In all modes, physical investment (rcap) was the most important contributor of predicted growth in China economy.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2019.10a
• /
• pp.103-103
• /
• 2019

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.410-417
• /
• 2017

The physical properties of perilla leaves cultivated in Geumsan province were analyzed according storage conditions. The a/b values of perilla leaves increased with increasing storage period. Electronic nose composed of 12 different metal oxide sensors was used to differentiate flavors of perilla leaves. Sensitivities(delta $R_{gas}/R_{air}$) of sensors from electronic nose were obtained by principal compound analysis(PCA). Proportion of the first principal component was 93.07% at $25^{\circ}C$ and 97.81% at $4^{\circ}C$, respectively. In our result, flavor patterns of perilla leaves can be differentiated according to the storage temperature.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.46-56
• /
• 2018

This paper aimed to identify main factors of community characters, which have an effect on the land surface temperature(LST) change and estimate the impacting coefficient(ratio) of factors in a significant level of statistics. Chungcheongbuk-do province was selected and then partitioned into city and county areas for the sake of convenience of modeling. LST time series data and the community character data were developed based on Terra Satellite MODIS data and collected from the National Statistical Office, respectively. By the cause and effect relationship between community characters and LST, regression coefficients were estimated using a penal model. In a panel modeling, LST and community characters were used as a dependent variable and explanatory variables, respectively. Panel modeling analysis was carried out using statistical package STATA14 and one-way fixed effect model was selected as the most suitable model to evaluate the regression coefficients in the study area. The impacting ratio of LST change by any explanatory variable derived from the regression coefficients of the panel model fixed. Impacting ratios for industrial areas, elevation ${\times}$ building, energy usage, average window speed, non-urban management area, agricultural, nature and environmental conservation, average precipitation were 3.746, 2.856, 2.742, 0.553, 0.102, 0.071 and 0.003, respectively.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.158-167
• /
• 2012

The purpose of this paper is to examine the factors that encouraged the industrial growth of Koran city gas industry during 1995-2009, by carrying out input-output structural decomposition analysis(IO-SDA) using Syrquin's model. The results show that the main factors which contributed to the growth of the Korean city gas industry are final domestic demand(48.4%) and technological change(38.6%). By examining the results for the three periods of 1995-2000, 2000-2005, and 2005-2009, the tendency of changes between the two main factors is drawn. In contrast to the drastic decreasing tendency of the final domestic demand's contribution to the growth, 84.5%, 18.9%, and 15.4%, respectively for each period, there is an increasing tendency for technological change as seen by the results of 7.4%, 70.0%, and 42.2%, respectively. These findings may be a result from the fact that the rate of gas supply in the residential sector has been saturated recently. They are also reflective of the energy consumption trend of industrial activities as there has been a shift in the approach for supplying energy, from the traditional approach which use fossil fuels to the newer approach which uses environmentally friendly energy sources. For the continued growth of the city gas industry, policymakers sould consider greater investment in the expansion of city gas supply infrastructure for industrial activities rather than for the residential sector.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.327-330
• /
• 2004

고객의 만족도와 충성도 제고는 기업활동 중 가장 중요한 기능으로 인식되고 있다. 따라서, 고객 이탈율이 높고 신규 고객 확보 경쟁이 치열한 초고속 인터넷 서비스 산업에서는 고객 만족도와 충성도의 증대를 통하여 고객 유지율을 제고하고 이를 통한 장기적인 수익성 증대를 위한 노력의 일환으로 막대한 경영자원을 투입하고 있다. 하지만 실제 서비스에 만족하고 충성도가 높은 고객이 기업의 수익성 확보에 기여하는 지에 관련해서는 그 실증 연구가 거의 이루어지고 있지 않다. 본 연구에서는 국내 한 초고속 인터넷 서비스 회사의 고객을 대상으로, 생존분석(survival analysis)을 이용한 개별 고객의 총 서비스 가입기간 추정을 통해 각 개별 고객의 가치를 산출하고, 이를 기반으로 고객의 만족도와 충성도, 수익성간의 연관 관계를 파악하였다. 분석 결과, 일반적인 예상과는 달리 높은 만족도와 충성도가 고객 서비스 이용 기간의 증대에 기여하지는 않는 것으로 밝혀졌다. 또한, 만족도 및 충성도와 수익성 간에 정(+)의 관계가 존재하지 않는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.629-634
• /
• 2016

In this study, we investigated the effect of factors that influence the measurement of smoke density using synthetic rubber flooring. The characteristics of rolling stock in an enclosed environment can cause enormous loss of life by smoke inhalation during fires inside passenger cars. The amount of smoke generation from interior materials for rolling stock is strictly restricted domestically and in other countries. Precise measurement of smoke density is therefore required to assess the fire performance of interior materials. Major factors that influence the measurement of smoke density include the uniformity of the specimen, the variations in conditions and instruments, and the operational and maintenance environment of the instruments. The contribution of factors was analyzed by estimating the uncertainty to investigate the contribution ratios of the major factors. The results show a contribution ratio of about 86% for the variation from the measurement of light transmission using a photomultiplier tube. Thus, this factor was the most representative for the measurement of smoke density. The contribution ratio of the other factors was low at about 11%, including irradiant flux conditions (${\pm}0.5 kW/m^2$) and the influence of the operational and maintenance environment of the instrument. These results were obtained using specimens with high uniformity.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.598-615
• /
• 2017

This paper compares the sources of the changes in the production of manufacturing industry between Korea and Japan during year 2000 ~year 2011 by I-O SDA. The results show that the first source of the increase in the production of Manufacturing industry in Korea is export, while in Japan the technological change. However, the contribution of technological change is relatively small in Korea and moreover decreasing. Meanwhile, the domestic final demand is the second source of the increase in the production of Korean manufacturing industry, but it was the first source of the decrease in the production of Japanese counterpart. On the other hand, the decrease in import substitution for both the intermediate and domestic final goods is significantly contributed to the decrease in the production of both Korean and Japanese manufacturing industry. Conclusively, these results confirm that the growth of Korean manufacturing industry has heavily depended on export. Then, considering the current global economic environment that is rapidly becoming more uncertain as well as volatile, the results imply that the heavy export dependence may become a key hurdle for the solid sustained growth of Korean manufacturing industry, so that policy ensuring more evenly balanced growth contribution from all growth sources is necessary. In particular, policy to promote technological change and import substitution is required with greater weight.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.603-608
• /
• 2009

In this study, "Hongro" apples for test samples were selected from a market for aroma analysis. Analysis was done after 1 hr, in a forming headspace while maintaining a temperature of $25^{\circ}C$. First, the complex aroma of the apples was assessed by a Direct Sensory Method. Secondly, the complex aroma was analyzed under individual aroma conditions separated by GC/FID/Olfactometry. Finally, aroma component analysis by GC/MS was performed. Degrees of contribution of aroma components were evaluated by an aroma value calculation considering aroma duration time, frequency, and intensity. The contribution rate (%) of the aroma induction component influencing apple aroma was determined by aroma component analysis and aroma contribution degree. As a result, it was found that the top four components were as follows, by contribution rate (%): acetic acid (23%), 1-hexanol (16%), butyl ethanoate (13%), 4-methoxy-2-methylbutane (9%). These four components constitute the complex aroma tested by the direct sensory method, and was largely recognized by the apple aroma test panel. Consequently, it was found that these components are the key factors in apple aroma. If the mechanism of formation of these components can be found, it could have a significant influence on consumers' acceptance of new varieties of apples.

• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.25-33
• /
• 2011

This study was conducted to examine genetic variation on leaf characteristics of Machilus thunbergii populations. Ten populations were subjected to multivariate analysis for 9 characteristics of leaf morphology. Average length of leaf blade, leaf width, petiole length, vein number were 9.8cm, 4.0cm, 1.8cm, 8.4 respectively, while angle of leaf base and leaf apex were $67.9^{\circ}$ and $78^{\circ}$ respectively. The coefficient of variation (C.V.) on leaf characteristics was 20% which indicate similar features among the populations. Nested analysis showed statistically signigicant differences among populations as well as among individuals within populations. Genetic relationship between populations using complete linkage method showed four groups to Euclidean distance 1.2 and did not show a tendency to cluster into the same group. There were three principal components that had a meaningful eigenvalue over 1.0 among the 9 components. The explanatory power of the top three main components on the total variation was 92.8%. The first principal component (PC) was explained about 40.3% which is mainly correlated with maximum leaf width and the second PC was explained about 28.7% which is correlated with leaf blade length. The third PC was explained about 23.8% which is correlated with petiole length ($X_3$). These characters were important factors for analysis of the relationship among natural populations of M. thunbergii.