• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.3-11
• /
• 2015

Purpose It is hard to obtain high quality images of knee and T.M joint because of a lot of soft tissues in the knee and T.M joint area. Most conventional system for high resolution scintigraphy was used by 4 mm aperture pinhole collimator. Performance comparison of high-resolution pinhole SPECT for Micro deluxe phantom using conventional system. the aim of this study is to evaluate performance of each aperture according to the diameter size and the usefulness of 24-hour delayed bone scintigraphy. Materials and Methods In this study 6 mm, 8 mm diameter pinhole collimators were mounted on Siemens E.CAM systems. In order to evaluate performance evaluation of each aperture and Micro Deluxe phantom was used for performance comparison of conventional SPECT system, Projection data were obtained with 9 degree increment per 30 second. Transverse images were reconstructed using dedicated OSEM algorithm with recovery of detector blurring. $^{99m}Tc-HDP$ source was used for 24-hour delayed bone scintigraphy. Results The knee joint images obtained with 24-hour delay were improved more than those obtained with 3-hour delay in our study. The 6 mm and 8 mm pinhole collimators FWHM have improved by 28% SNR and Uniformity have improved by 35%, Contrast has improved by 7% in 24-hour delayed knee joint image. While in 24-hour delayed T.M joint image of the 6 mm and 8 mm pinhole collimators FWHM have decreased by 60% SNR has decreased by 20% and Uniformity has decreased by 25%, Contrast has decreased significantly. Conclusion Pinhole collimators with 6 mm and 8 mm diameter could offer a superior performance for 24-hour delayed bone scintigraphy. The use of 24-hour delayed image provides additional benefits for pinhole scintigraphy of knee joint. Therefore, we expect that it is useful for precise diagnosis of knee joint and it is applicable to others joint imaging.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.12-16
• /
• 2015

Purpose Principal component analysis (PCA) is a method often used in the neuroimagre analysis as a multivariate analysis technique for describing the structure of high dimensional correlation as the structure of lower dimensional space. PCA is a statistical procedure that uses an orthogonal transformation to convert a set of observations of correlated variables into a set of values of linearly independent variables called principal components. In this study, in order to investigate the usefulness of PCA in the brain PET image analysis, we tried to analyze C[11]-PIB PET image as a representative case. Materials and Methods Nineteen subjects were included in this study (normal = 9, AD/MCI = 10). For C[11]-PIB, PET scan were acquired for 20 min starting 40 min after intravenous injection of 9.6 MBq/kg C[11]-PIB. All emission recordings were acquired with the Biograph 6 Hi-Rez (Siemens-CTI, Knoxville, TN) in three-dimensional acquisition mode. Transmission map for attenuation-correction was acquired using the CT emission scans (130 kVp, 240 mA). Standardized uptake values (SUVs) of C[11]-PIB calculated from PET/CT. In normal subjects, 3T MRI T1-weighted images were obtained to create a C[11]-PIB template. Spatial normalization and smoothing were conducted as a pre-processing for PCA using SPM8 and PCA was conducted using Matlab2012b. Results Through the PCA, we obtained linearly uncorrelated independent principal component images. Principal component images obtained through the PCA can simplify the variation of whole C[11]-PIB images into several principal components including the variation of neocortex and white matter and the variation of deep brain structure such as pons. Conclusion PCA is useful to analyze and extract the main pattern of C[11]-PIB image. PCA, as a method of multivariate analysis, might be useful for pattern recognition of neuroimages such as FDG-PET or fMRI as well as C[11]-PIB image.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.62-66
• /
• 2015

Purpose Various database comparison methods(DCM) are used for analyzing functional neuro-imaging. It is possible to statistically evaluate decreased or increased metabolism of abnormal patient's brain by comparing with asymptomatic controls in DCM. And results of DCM are additionally used for easily explaining defect region. The aim of this study was to evaluate usefulness of statistical parametric mapping(SPM) and scenium. Materials and Methods Data of 15 patients($62.02{\pm}15.03year$) underwent $^{18}F-FDG$ brain PET/CT were collected and analyzed. Biograph TruePoint 40 with TrueV, (Siemens) was used as a PET/CT scanner. Scenium(version 4.0) in Syngo.via(version VA30A) and SPM99 were applied for statistical evaluation. Consistency between PET reading and result of DCM were evaluated by 5 nuclear medicine physicians through a questionnaire survey. SUV and SD changes were evaluated by changing iteration, gaussian filter and matrix size in scenium. And average required time for generating result of SPM99 and scenium was compared by 3 medical technologists. Results Consistency from the result of SPM99 and scenium showed 84% and 92.4% compare to PET reading. When iteration 4, FWHM 8 and matrix size 168, SUV and SD were decreased by 0.59%, 8.73%, 4.69%, 20.38% and 0.88%, 8.25% respectively compare to routine parameter(iteration 8, FWHM 2 and matrix size 336) of scenium. Average required time of SPM99 and Scenium took 282 seconds and 116 seconds to generate result. Conclusion Results of SPM99 and Scenium showed high consistency compare to PET reading. Various parameters can be controled by user when using SPM. However, normal database needs to be acquired. And it takes significant amount of time and effort for the first set up. On the other hand, Scenium provides normal database even though modifiable parameters are limited. Therefore, more informations could be provided for brain PET/CT if properly understanding and selecting each DCM.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.1
• /
• pp.85-95
• /
• 1998

The broadband ultrasonic transducers have been designed to use in obtaining the broadband echo signals from fish schools in relation to the identification of fish species. The broadening of bandwidth was achieved by attaching double acoustic matching layers on the front face of a Tonpilz transducer consisted of an aluminum head, a piezoelectric ring, a brass tail and to evaluate the performance characteristics, such as the transmitting voltage response(TVR) of transducers. The constructed transducers were tested experimentally and numerically by changing the parameters such as impedances and thicknesses of the head, tail and matching layers, in the water tank. Also, the developed transducer was excited by a chirp signal and the received chirp waveforms were analyzed. According to the measured TVR results, the available 3 dB bandwidth of the transducer with double matching layers of an $Al_O_3/epoxy$ composite of 7 mm thick and a polyurethane window of 18 mm thick was 7.3 kHz with a center frequency of 38.8 kHz, and the maximum and the minimum values of the TVR in this frequency region were 135.7 dB and 132.7 dB re $1\;{\mu}Pa/V$ at 1 m, respectively. Also, the available 3 dB bandwidth of the transducer with double matching layers of an $Al_O_3/epoxy$ composite of 11 mm thick and a polyurethane window of 15 mm thick was 6.2 kHz with a center frequency of 38.6 kHz, and the maximum TVR value in the frequency region was 136.3 dB re $1\;{\mu}Pa/V$ at 1 m. Reasonable agreement between the experimental results and the numerical results for the TVR of the developed transducers was achieved. The frequency dependant characteristics of experimentally observed chirp signals closely matched to the measured TVR results. These results suggest that there is potential for increasing the bandwidth by varying other parameters in the transducer design and the material of the acoustic matching layers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4985-4994
• /
• 2011

The purpose of this study was to investigate the level of knowledge, health belief and sick role behavior, and the influencing factors on them among the patients with coronary artery disease. The study subjects were 168 patients diagnosed as having coronary artery disease at a university hospital during the period from July 1st, to August 31th, 2010. As a results, Based on the mean scores of knowledge about coronary artery disease according to the general characteristics, they were significantly higher in males than in females(p=0.033). The mean scores of health belief were significantly higher according to age decrease(p=0.043). The mean scores of sick role behaviors were significantly higher in females than in males(p=0.006), with their increasing tendency in the age range from 40's to 60's and decreasing tendency in the age over 70's(p=0.015), the group with religion were significantly higher than the one without(p=0.050). In terms of the mean scores of knowledge and sick role behaviors about coronary artery disease according to the related characteristics, there was a significant difference with the time period elapsed after diagnosed as coronary artery disease, frequency of admissions, perception about the disease, information gathering through mass com. but in terms of those of health belief, there was a not significant difference in all the variables. The significantly influencing factors on degree of knowledge by multivariate regression analysis included degree of perception about a disease, scores of sick role behavior, presence of coronary artery diseases in a family or friends, and the time period elapsed after diagnosed as having coronary artery disease. Those on health belief included age and scores of sick role behavior, and those on sick role behaviors included score of knowledge, perception about a disease, age, BMI, and religion. The results showed a significant difference with their general characteristics or coronary artery disease-related factors.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2021

As facilities such as dam reservoir wetlands and agricultural irrigation reservoir wetlands are built, sedimentation occurs over time through erosion, sedimentation transport, and sediment deposition. Sedimentation issues are very important for the maintenance of reservoir wetlands because long-term sedimentation of sediments affects flood and drought control functions. However, research on resignation has been estimated mainly by empirical formulas due to the lack of available data. The purpose of this study was to calculate and compare the sediment deposition rate by developing a multiple regression model along with actual data and empirical formulas. In addition, it was attempted to identify potential causes of collapse by applying it to 64 reservoir wetlands that suffered flood damage due to the long rainy season in 2020 due to reservoir wetland sedimentation and aging. For the target reservoir, 10 locations including the GaGog reservoir located in Miryang city, Gyeongsangnam province in South Korea, where there is actual survey information, were selected. A multiple regression model was developed in consideration of physical and climatic characteristics, and a total of four empirical formulas and sediment deposition rate were calculated. Using this, the error of the sediment deposition rate was compared. As a result of calculating the sediment deposition rate using the multiple regression model, the error was the lowest from 0.21(m³km²/yr) to 2.13(m³km²/yr). Therefore, based on the sediment deposition rate estimated by the multi-regression model, the change in the available capacity of reservoir wetlands was analyzed, and the effective storage capacity was found to have decreased from 0.21(%) to 16.56(%). In addition, the sediment deposition rate of the reservoir where the overflow damage occurred was relatively higher than that of the reservoir where the piping damage occurred. In other words, accumulating sediment deposition rate at the bottom of the reservoir would result in a lack of acceptable effective water capacity and reduced reservoir flood and drought control capabilities, resulting in reservoir collapse damage.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.453-462
• /
• 2021

A lot of license plate data is required for car number recognition. License plate data needs to be balanced from past license plates to the latest license plates. However, it is difficult to obtain data from the actual past license plate to the latest ones. In order to solve this problem, a license plate recognition study through deep learning is being conducted by creating a synthetic license plates. Since the synthetic data have differences from real data, and various data augmentation techniques are used to solve these problems. Existing data augmentation simply used methods such as brightness, rotation, affine transformation, blur, and noise. In this paper, we apply a style transformation method that transforms synthetic data into real-world data styles with data augmentation methods. In addition, real license plate data are noisy when it is captured from a distance and under the dark environment. If we simply recognize characters with input data, chances of misrecognition are high. To improve character recognition, in this paper, we applied the DeblurGANv2 method as a quality improvement method for character recognition, increasing the accuracy of license plate recognition. The method of deep learning for license plate detection and license plate number recognition used YOLO-V5. To determine the performance of the synthetic license plate data, we construct a test set by collecting our own secured license plates. License plate detection without style conversion recorded 0.614 mAP. As a result of applying the style transformation, we confirm that the license plate detection performance was improved by recording 0.679mAP. In addition, the successul detection rate without image enhancement was 0.872, and the detection rate was 0.915 after image enhancement, confirming that the performance improved.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.

• The Korean Journal of Archival Studies
• /
• no.23
• /
• pp.141-178
• /
• 2010

The Administration of Labor was responsible for the technical and practical functions like policy-making of labor matters and implementing the relevant laws. However, there has been a few record transferred to the National Archives to help find out the labor policy-making process. This is one of the typical examples that shows the discontinuity and unbalance, and disorderly filing of the administrative records in Korea. Naturally it is almost impossible to retrieve the appropriate content through the records file-name. Users should be at the trouble to compare the record items and their content one by one. For the re-organization of the Administration of Labor' records, this research suggests the four-level analysis of functions of the Administration. The Administration of Labor' survived records could be linked to each level function. And the publication of the 'Records Abstract Catalog' providing users with more information about the records would pave the way for easier access to the records. In addition, it also suggests the logical re-filing of the survived records of which we cannot find the order or sequence. This re-organization of the survived records would help to establish the acquisition and appraisal policy of the labor records as well as the new way of description and finding tool hereafter. Drawing up labor history map is a starting point for the acquisition strategy of the labor records, which could allow users to gain systematic access on the survived records. Of course, extensive investigation and research on the survived records is a prerequisite for the map. It would be required to research on the survived records of the other government agencies, including economic-social area ministries and investigation agencies and the National Assembly as well. It is also needed to arrange and typify the significant incidents and activities on thematic and periodic frames in the labor history. If possible to understand or connect the survived records and these accomplishments comprehensively, it would be of great help for the acquisition of the labor records and the related oral records projects.