• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.362-367
• /
• 2017

This study was conducted to compare the particulate removal efficiency of the developed diesel particulate filter using various measurement methods in a high-speed marine diesel engine. A four-stroke mechanical marine diesel engine is used for the test, which has a maximum output of 403 kW and is coupled to an AC dynamometer to control engine speed and load. The test was conducted based on four steady-state engine operating conditions of E3 engine test cycle for the measurement of PM and soot removal efficiency using partial dilution method considered as gravimetric method and filter smoke number method as light absorption method, respectively. As a result of the removal efficiency measurement according to the application of diesel particulate filter, particulate matter was reduced from 76% to 91% and the soot was reduced by more than 90% while meeting the permissible engine back pressure. From these results, the applicability of diesel particulate filter adopted in high-speed marine diesel engines could be confirmed. In addition, based on the result that the particulate removal efficiency varies with different measurement methods, the necessity of unification of these methods could be identified.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.53-63
• /
• 2012

As a result of the economical loss caused by unusual climate changes resulting from emission of excessive green house gases such as carbon dioxide which is expected to account for 5~20% of the world GDP by 2100, researching technologies regarding the reduction of carbon dioxide emission is being favored worldwide as a part of the high value-added industry. As one of the Annex II countries of Kyoto Protocol of 1997 that should keep the average $CO_2$ emission rate of 5% by 2013, South Korea is also dedicated to the researches and industries of $CO_2$ emission reduction. In this study, Application of LiDAR data & KOMPSAT-2 satellite image for calculated forest Biomass. Raw LiDAR data's tree numbers and tree-high with field survey data resulted in 90% similarity of objects and an average of 0.3m difference in tree-high. Calculating the forest biomass through forest type information categorized as KOMPSAT-2 image and LiDAR data's tree-high data of tree enabled the estimation of $CO_2$ absorption and forest biomass of forest type, The similarity between the field survey average of 90% or higher were analyzed.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.353-364
• /
• 2011

The present study began from the criticism that the discussions related to the existing digital media have focused on the technical productivity and effectiveness to focus on the positive perspective. Therefore, this study will concretely confirm the dangers that may be caused by digital media and confirm the overall risk perception for digital media such as the user's opinions for risk evaluations and risk management for such dangers. As a result of making the digital convergence media, the smart phone, as the detail study subject, the 17 risk types including the 'risks of financial dimensions, risks of social-cultural dimensions, risks of individual dimensions and risks of pathological dimensions' were classified. Furthermore, the users appeared to highly evaluate the seriousness and possibilities of risks as a result of analyzing the risk-factor per each risk type(risk magnitude ${\times}$ development possibility). Next, it appeared that the users did not have high degree of reliability for the government in the aspects of countermeasures and prevention of risks and appeared to highly evaluate their expectation and liability for their individual roles. If the seriousness and development possibilities, the evaluations for liability, preventative measures and post-management methods for the risks of smart phones can be thoroughly analyzed and applied, it will be able to expand them as significant political countermeasures that can reduce the risks of other digital media in the future.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.382-390
• /
• 2016

This study has investigated the status and overview of design characteristics of customized shoes, which receives much recognition at domestic and overseas markets. Based on the market research on current consumer lifestyle and needs of the custom-shoes(which is an abbreviation of customized shoes), this study has provided its development directions, views and demands. The design types of custom-shoes have been broadly divide into two: firstly 'style centered custom-shoes'; secondly 'function centered custom-shoes'. Style centered custom-shoes are specifically divided into 3 types; first, formal custom-shoes; second, sports and casual custom-shoes; and lastly, bespoke shoes. Function centered custom-shoes design refers to enhancing the function of personal soleprint which has to be designed by delicately detailed insole and outsole, rather than alignment of exterior parts of the shoes. These are used in professional sports shoes and also include orthopedics footwear and grafted footwear for people who have disabled on foot. Custom footwear market has been highly expanded and has entered value-added market according to increasing interest in foot health and shopping trends on shoes buying like taking shoes as personal expression in accordance with a variety of places and situations. In the near future, custom-shoes can be produced in a couple of days due to the technological advance of 3D scanners and 3D printers. This phenomenon will wants more demands of specific shoes experts such as custom-design consultants or shoes fitting experts, who can overcome limitations of online custom-shoes stores.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.22-32
• /
• 2016

As the number of aged population rapidly goes up, the cases of stroke and the related medical expenses continuously increase. The purpose of this study is to investigate the mortality of stroke patients based on CCI(Charlson Comorbidity Index) by utilizing the Korea National Hospital Discharge Injury Survey, analyzing the factors associated with the mortality of stroke patients. We analyzed 21,494 cases which are classified as the death of strokes aged over 20 years by using the Korea National Hospital Discharge Injury Survey between the year 2005 and 2010. In order to find out the mortality based on CCI and status of comorbidity, we used the technical statistics. We performed a logistic regression analysis to examine the reasons for the mortality of the strokes. We found that the independent variables for the influence of the mortality of strokes include age, type of insurance, residence urban size, size of hospital beds, the location of hospital, admission route, physical therapy, brain surgery, type of stroke, and CCI. This indicates that the effective monitoring on the age, types of stroke, comorbidity is needed. In addition to this, more medical support toward medicaid patients are needed, too. We believe that these results will be used positively for the evaluation of the stroke patients, providing the basic materials for the further research on the establishment of the health-related policy.

• Journal of Broadcast Engineering
• /
• v.25 no.5
• /
• pp.750-757
• /
• 2020

One of the basic tasks for robots to interact with humans is to quickly and accurately grasp human behavior. Therefore, it is necessary to increase the accuracy of human pose recognition when the robot is estimating the human pose and to recognize it as quickly as possible. However, when the human pose is estimated using deep learning, which is a representative method of artificial intelligence technology, recognition accuracy and speed are not satisfied at the same time. Therefore, it is common to select one of a top-down method that has high inference accuracy or a bottom-up method that has high processing speed. In this paper, we propose two methods that complement the disadvantages while including both the advantages of the two methods mentioned above. The first is to perform parallel inference on the server using multi GPU, and the second is to mix bottom-up and One-class Classification. As a result of the experiment, both of the methods presented in this paper showed improvement in speed. If these two methods are applied to the entertainment robot, it is expected that a highly reliable interaction with the audience can be performed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.155-168
• /
• 2018

This study singled out 30 smart car features and surveyed 250 respondents. Assuming that the relationship between fulfillment of a feature or a customer need and the satisfaction with that feature is not necessarily linear, this study was conducted using Kano's method. Two devices, Timko Deviation(TD) and Kano Distribution Index(KDI), were devised to help evaluate resulting Kano table quantitatively. Previous research based on Kano's original framework showed the limit to the analysis of new or unfamiliar features: more than 85% of the features surveyed turned out to be either Attractive or Indifferent attributes. This study attempted a new empirical approach by applying customer experiences, price conditions, and customer self-stated importance. The results showed that customer experience of the surveyed features affected the overall satisfaction level, signifying that Kano's method should be conducted with care when analyzing emerging technologies such as smart cars. It is expected that this study would be utilized for better understanding of the perception and trends of customers regarding new technologies. This study also suggests a new approach to the analysis of customer requirements by providing price conditions.

• Proceedings of the KSMRM Conference
• /
• 1999.11a
• /
• pp.69-71
• /
• 1999

최근 한국 의학의 발전은 전체 한국의 선진화를 선도하다고 보기에는 힘드리만 최소한 국제무대에의 진출은 괄목할만한 발전을 보이고 있다. 최근에 들어 국내 방사선영상과련 학회의 발전은 날로 비약적인 추세를 보이고 있다. 일례로 대한방사선의학회는 본 저자가 전공의 하던 1980년도 초기만 해도 호텔의 큰 홀 한 개만 빌려서 하루만 해도 넉넉하게 진행되었다. 그러나 최근의 학회사정은 대형호텔 1개층 통째로 빌리고 3일간 진행해도 여유가 없을 정도이며 더욱이 추계학회는 지방에서 유치할만한 공간이 부족하여 이제는 없어져야할 지경에 이러렀다. 그뿐 아니라 대한 자기공명의과학회를 포함한 각종 학회가 이제 그 규모를 더해가고 있어. 대한민국에 있어서 진단 방사선영역의 의학은 급속히 발전하여 RSNA, ISMRM등에서도 세계 발표순위가 4-5위권을 다투게 되었다. 이러한 발전은 양적인 발전이 우세하여 주로 임상연구에 기반을 두고 있는데 이 자체로는 장기적인 발전에 한계점이 있으므로 앞으로는 기초과학연구에 기초한 질적 발전을 같이 추구하여야만 균형있는 성장을 기대할 수 있겠다. 이러한 기존의 구성에 최근 급격한 변화를 주도하는 학문이 MRI부분이 되며 이 분야를 연구하는 PhD 들의 역할이 크게 대두되고 있다. 현재 국내에도 초기 단계이지만 MRI를 생산하고 있으며 PhD들의 활동이 성장단계에 접어들었다고 할수 있다. 과거 우리의 NRI역사에서는 금성사 MR기계처럼 육성되기 전에 시들며 노력하던 기술진이 흩어져야 했던 어두운 기억이 있다. 이러한 시점에서 우리의 힘들었던 과거를 돌이켜보며 또 하나의 기초부분이 육성되 수 있도록 서로가 격려하며 협조하여야 될 것으로 생각되어 다음과 같이 요약을 하였다. 소기관으로는 세포 막, 미토콘드리아 (mitochondria), endoplasmic reticulum, Golgi 체, lysosome, peroxisome 그리고 세포질등이 있으며, 이들중에서 lysosomes, peroxisomes, 그리고 미토콘드리아가 특정한 유전성 백질질환에 중요한 역할을 하는 것이 밝혀졌다. 이러한 질환들은 최소한 각 소기관에 의한 질환군으로 분류될 수 있다.SXR이 ER의 transactivation 효과를 약간 촉진한 반면 MDA-MB-231세포는 SXR을 제외한 CAR와 PPAR${\gamma}$에 의해 ER의 transactivation 효과가 약간 증가되는 경향을 보였다. 이러한 결과는 유방암세포에서는 CAR, SXR, PPAR${\gamma}$과 같은 xenobiotic nuclear receptor에 의한 ER transactivation 효과가 간암세포와는 다르게 나타나며, 유방암의 종류에 따라서 endogenous CAR, SXR, PPAR${\gamma}$수용체가 다르게 발현됨으로써 이들에 대한 반응이 서로 상이한 특징을 나타낼 수 있을 것으로 사료된다. 따라서 estrogen receptor에 의해 매개되는 estrogn의 전사활성조절기전이 표적세포에 따라 다른 경로를 포함 할 수 있음을 시사한다.서 흡착 능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 상대적으로 우수한 것으로 나타났으며, 혼합충전재는 암모니아의 경우 코코넛과 펄라이트의 비율이 7：3인 혼합 재료 3번과 소나무수피와 펄라이트의 비율이 7：3인 혼합 재료 6번에서 다른 혼합 재료에 비하여 우수한 것으

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.313-313
• /
• 2011

오염물질은 배출원의 형태에 따라 점오염물질과 비점오염물질로 구분하고 있고 점오염물질은 생활하수, 산업폐수, 축산폐수, 환경기초시설 방류수 등으로 발생원이 명확하고 수집하여 처리 및 관리가 용이하나 비점오염물질은 배출위치가 명확하지 않으며, 강우 시 일시적으로 대량 배출되는 특징을 가진 농경지, 도로, 대지, 임야 등에서 배출되는 오염물질을 말한다. 우리나라에서 비점오염은 전체 수질오염의 42~67%(2003년)를 차지하는 것으로 나타났고, 2015년에는 전체 수질오염의 65~75%에 이를 것으로 예상되고 있다. 이 중 농업 비점오염원은 총 수질 오염량의 30%이상을 차지할 것으로 추정하고 있으나 이를 저감하기 위한 최적관리방법의 효과검증에 관한 연구는 아직 미미한 상태이다. 이에 본 연구에서는 농경지 중 밭에서 발생하는 비점오염을 저감하기 위한 기법으로 다양한 규모와 형태의 Silt Fence/식생밭두렁/침사구를 설치하여 밭 비점오염에 대한 저감효과를 평가하고 제어대책을 개발하여 최적관리기법을 제시하고 이에 대한 매뉴얼을 개발하기 위한 기초연구를 실시하려 한다. Silt Fence는 주로 건설공사현장에서 홍수유출 발생 시 인접한 하천 및 호소 등으로 유사 및 오염물질이 유입되는 것을 방지하기 위해 임시적으로 설치하는 시설로 합성 직물 필터를 나무나 금속 막대로 연결하여 등고선 방향으로 설치하는 것으로 대상 지역의 토양이 교란되기 전에 그 지역 아래쪽에 설치한다. 식생밭두렁은 밭의 이랑의 길이가 길어질수록 강우 시 빗물이 하단에 이를 때 늘어난 유량과 빠른 유속으로 토양침식이 가중되는데, 이때 30~35m간격으로 식생밭두렁을 설치하게 되면 상부와 하부의 침식정도가 유사한 경향을 보여 식생밭두렁을 설치하지 않은 지역에 비해 토양의 침식정도가 작게 나타나게 된다. 이러한 Silt Fence/식생밭두렁/침사구의 밭 비점오염의 저감효과 평가 및 제어대책 개발을 위한 기초 실험을 수행하기 위해 경상남도 사천시 용현면 선진리 일대에 시험포장을 조성 하였으며, 시험포장내에 6개의 Plot을 만들어 하단부에 포장에서의 유출수의 유량을 측정하기 위해 플룸을 설치하였고 실내실험을 통해 플룸의 수위-유량관계 곡선을 작성하였다. 포장의 토양특성을 판별하기 위해 Plot별로 토양시료를 채취하여 특성을 분석 한 결과 6개 Plot모두 모래함량이 많은 점토질 사질토로 분류되었다. 향후 강우 시 시험포장에서 발생하는 유출수의 수질을 분석하고 Silt Fence/식생밭두렁/침사구의 오염물질 저감효과를 분석하여 제어대책을 개발하게 되면 농업수자원확보를 위한 관리방안 선정을 위한 정책수립에 활용될 수 있으며 비점오염 배출을 최소화시켜 수질의 개선에 기여할 뿐만 아니라 우리나라 농업에 적합한 최적영농관리기술을 개발 할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.597-601
• /
• 2006

There are considerable amount of man power and time spent for analysis and selection of various materials due to the inadequate application system and rapid searching process of material related information in each stage of building production process. Also, due to the insufficiency in recycling system of important information created for each process, they are hoarded at each task stage and project completion. As a result, because of the repetition of the similar/identical tasks on each process, it is the major reason for impeding the efficient employment of manpower of the company and decreasing competition of the company. Moreover, in selecting finish material in the project field, there are many difficulties due to the lack of technical information such as product characteristics and field applications. The construction quality also affects the profit and loss of the product which calls for a need to develop continued information management system that the finish material related examples could be shared in real time. The objective of this study is to propose a building finish material information which the real time research and application is possible to raise the productivity. TO do this, the current material information task status analysis and questionnaire research should be conducted to understand the demand of system development and reflect the result onto the system for easy access and application. Therefore, the building finish material information system for enhancement of productivity of construction task proposed in this study is expected to be utilized in enhancement of construction quality, maximization of company profit, and strengthening of company competition.