• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2083-2090
• /
• 2006

In an proposed Context-Aware SOA(Service Oriented Architecture) based OSGi(Open Service Gateway initiative) platform, Service provider manages relative kinds of services in an integrative basis from various sensors, puts each service in a SOAP (Simple Object access Protocol) message, and register thorn to the UDDI(Universal Description Discovery and Integration) server of service registry, service requester retrivel the specified kinds of services and call them to service provider. Recently most context-aware technologies for ubiquitous home network are mainly putting emphasis on RFID/USN and location-based technology. Because of this, service-oriented architecture researches have not been made enough. Under the environment of an OSGi service platform, various context-aware services are dynamically mapping from various sensors, new services are being offered for the asking of users, and existing services are changing. Accordingly, the data sharing between services provided, management of service life cycle, and the facilitation of service distribution are needed. Taking into considering all these factors, this study has suggested an Context-Aware SOA based eclipse SOA Tools Platform using OSGi platform that can transaction throughtput of more than 546 TPS of distributional Little's Law from ATAM(Architecture Tradeoff Analysis Method) while remaining stable other condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.469-486
• /
• 2017

Economy-based urban redevelopment is the main priority in Malaysia, but has resulted in social problems such as gentrification, loss of heritage and identity, inequity, etc. Hence, it is crucial for the government to seek other alternatives rather than being solely reliant on urban redevelopment. Neighborhood renewal is a strategy involving the integration of redevelopment, rehabilitation, revitalization and preservation that aims to improve deprived areas using a more holistic approach. The aim of this paper is to review the neighborhood renewal policies in developed countries and to identify those elements that can be adopted in Malaysia. This study is conducted via a literature review. It was found that neighborhood renewal which integrates people-based, place-based and system-based policies highlights the importance of diversity, thereby aiming for resource optimization, community engagement and urban governance with the focal point of the fair, equity and systematic provision of resources. This paper concluded that neighborhood renewal in Malaysia should be initiated by locals with an emphasis on real local participation and a sustainable funding system. The government and local authorities should be observers rather than implementers.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.4
• /
• pp.195-205
• /
• 2018

Noerok is a green pigment made of mineral used the Gachil(priming coat) of wooden architecture in Chosun Dynasty era. It has been reported that various Noerok are discovered in Janggimyeon, Pohang. In this study, The Noerok from two places is compared and discussed. Noerok in the two places has blulsh-green to green color, and it is similar to their occurrences on fracture filling, vein and dike on outcrop. However, there are differences between two sites according to its petrological feature, mineral composition and geochemistry. While the Noeseongsan sample is mostly celadonite, Gwangjeongsan samples are characterized by celadonite with varying contents of cristobalite, tridymite, feldspar, along with some vitrified contents. In terms of major elements, the amount of $Al_2O_3$, $Fe_2O_3$, MgO and $K_2O$ decreases linearly with increasing $SiO_2$, whereas $Fe_2O_3$ is linearly proportional to MgO. In summary, Noerok in the study areas can be classified into 4 types (type 1, type 2, type 3-1, type 3-2) base on color, mineral composition, elemental composition, and vitrification grade.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.742-750
• /
• 2018

In this paper, in order to enable zero-layer FTP cell using only 5V MOS devices on the basis of $0.13{\mu}m$ BCD process, the tunnel oxide thickness is used as the gate oxide thickness of $125{\AA}$ of the 5V MOS device at 82A. The HDNW layer, which is the default in the BCD process, is used. Thus, the proposed zero layer FTP cell does not require the addition of tunnel oxide and DNW mask. Also, from the viewpoint of memory IP design, a single memory structure which is used only for trimming analog circuit of PMIC chip is used instead of the dual memory structure dividing into designer memory area and user memory area. The start-up circuit of the BGR (Bandgap Reference Voltage) generator circuit is designed to operate in the voltage range of 1.8V to 5.5V. On the other hand, when the 64-bit FTP memory IP is powered on, the internal read signal is designed to maintain the initial read data at 00H. The layout size of the 64-bit FTP IP designed using the $0.13-{\mu}m$ Magnachip process .is $485.21{\mu}m{\times}440.665{\mu}m$($=0.214mm^2$).

• Clean Technology
• /
• v.25 no.2
• /
• pp.114-122
• /
• 2019

The synthesis of bio polyol from renewable resources has attracted attention in recent years. In particular, it is important to take advantage of bio polyols in the synthesis of polymers. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized using polycarbonate polyol/bio polyol (PO3G: polytrimethylene ether glycol prepared from 1, 3-propanediol produced by fermentation from corn sugar), methylene diphenyl diisocyanate (MDI) and 1,4-butandiol (BD). The properties of prepared polyurethane films and the cell structure of wet type artificial leather were investigated. As the bio polyol content increased, the tensile strength of polyurethane films decreased, however, the elongation at break increased significantly. As a result of thermal characteristics analysis, the glass transition temperature of polyurethanes increased when increasing the content of polycarbonate polyol. As a result of comparing the cell characteristics of wet type artificial leathers prepared in this study, it was found that the number and uniformity of cells formed in the artificial leather samples increased when increasing the content of polycarbonate polyol in polycarbonate polyol/bio polyol. From these results, it was found that DMF-based polyurethane containing an appropriate amount of bio polyol could be used for wet type artificial leather. The bio textile analysis system according to ASTM standard was used to measure the bio carbon content of polyurethane. The content of bio carbon increased proportionally with the increase of bio polyol content used in polyurethane synthesis.

• Clean Technology
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2019

Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.208-216
• /
• 2019

The purpose of this study was to investigated the biological activities such as cytotoxic, anti-oxidant and anti-inflammatory using Mentha arvensis L. extracts. Mentha arvensis L. was prepared by extracting with DW and 80% ethanol, after cell viability was assessed by MTT assay using RAW 264.7 cells. Antioxidant activities, and Anti-inflammatory activities measured through changes in the levels of reactive oxygen species (ROS), nitric oxide (NO), leukotrien B4 (LTB4), and anti- or in-flammatory cytokines($IL-1{\beta}$, IL-6, tumor necrosis factor $(TNF)-{\alpha}$, and IL-10) on LPS-induced RAW 264.7 cells. All test measured by ELISA reader and Luminex. Mentha arvensis L. was no cytotoxic in water and 80% ethanol extracts, and Concentration of 100 ug/ml of 80% ethanol extract was suppressed the productions of ROS in LPS-induced RAW 264.7 cells. Also, Productions of NO, LTB4, inflammatory or anti-inflammatory cytokines showed efficacy change that dose-independent of all extracts. In other words, Mentha arvensis L. showed significant biological activities showing anti-inflammatory, and anti-oxidant. These results may be developed as a raw material for new health food and therapeutics to ease the symptoms mentioned above.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.61-70
• /
• 2011

The impact protection system consists of an arrangement of circular sheet pile cofferdams-denoted dolphin structuredeeply embedded in the seabed, filled with crushed rock and closed at the top with a robust concrete cap. Centrifuge model tests were performed to investigation the behaviors of dolphins in this study. Total 7 quasi-model tests and 11 dynamic model tests were performed. The main experimental results can be summarized as follows. Firstly, The experimental force-displacement results for quasi-static tests show a limited influence on the initial stiffness of the structure from the change in fill density and the related change in the stiffness of the fill. And by comparing the dissipation at the same dolphin displacement it was found that the denser fill increase the dissipation by 16% for the 20m dolphin and by 23% for the 30m dolphin. The larger sensitivity for the large dolphin is explained by a larger contribution to the dissipation from strain in the fill. In low level impacts the dynamic force-response is up to 26~58% larger than the quasi-static and the dissipation response is showed larger in small displacement. Hence, it is concluded conservative to use the quasi-static response characteristics in the approximation of the response, and it is further concluded that the dolphin resistance to low level impacts is demonstrated to be equivalent and even superior to the high level impacts.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.903-913
• /
• 2021

Three-type PVC membranes denoted by AEM-1, AEM-2, and AEM-3 with a cross-linked anion-exchange group were prepared by substitution reaction of PVC with triethyldiamine (TEDA), 1,4-dimethylpiperazine (DMP), and 1,4-bis(imidazol-1-ylmethyl)benzene (BIB) in cyclohexanone, respectively. We confirmed the successful preparation of the AEM-1, AEM-2, and AEM-3 via ionic conductivity (S/cm), water uptake (%), contact angle, ion-exchange capacity (m_eq/g), thermal properties, SEM and XPS analysis, respectively. The electrochemical capacitor experiments using PVC membrane with cross-linked anion-exchange group in organic electrolytes were performed. The prepared AEM-1, AEM-2 AEM-3 have a good stability by charge and discharge performance in organic electrolyte. As a result, the AEM-2 and AEM-3 membrane based on PVC prepared by the solvent casting method after substituent reaction is suitable for the use as a separator in organic electrochemical capacitor (supercapacitor).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.36-42
• /
• 2021

With recent developments in the Fourth Industrial Revolution, the manufacturing industry has changed rapidly. Through key aspects of Fourth Industrial Revolution super-connections and super-intelligence, machine learning will be able to make fault predictions during the foam-making process. Polyol and isocyanate are components in polyurethane foam. There has been a lot of research that could affect the characteristics of the products, depending on the specific mixture ratio and temperature. Based on these characteristics, this study collects data from each factor during the foam-making process and applies them to machine learning in order to predict faults. The algorithms used in machine learning are the decision tree, kNN, and an ensemble algorithm, and these algorithms learn from 5,147 cases. Based on 1,000 pieces of data for validation, the learning results show up to 98.5% accuracy using the ensemble algorithm. Therefore, the results confirm the faults of currently produced parts by collecting real-time data from each factor during the foam-making process. Furthermore, control of each of the factors may improve the fault rate.